边坡防护室内水力冲刷模拟试验及降雨入渗分析

阐述了边坡防护室内水力冲刷模拟试验的目的、方法和步骤.针对不同边坡防护型式、不同坡率、不同土质状况的五种试件进行了降雨入渗试验,对结果进行了分析,并总结出不同工况下的降雨入渗规律.     

岩溶富水区深埋水沟排水隧道注浆圈参数研究

为合理确定深埋水沟排水方式下隧道注浆圈特征参数,以某岩溶富水区隧道工程为依托,采用FLAC3D软件建立流固耦合计算模型,针对其注浆圈参数进行合理探讨,研究注浆圈厚度、注浆圈渗透性对隧道涌水量、衬砌水压力、结构安全性的影响规律。研究结果表明： 增加注浆圈厚度或降低注浆圈渗透性可降低衬砌水压、控制涌水量、保障结构安全,但并不代表实际工程中注浆参数需要追求最值,而应兼顾安全性和经济性,选取相对合理的注浆参数;结合模拟计算结果与同类工程案例,建议依托工程注浆圈厚度以5～6 m、渗透性比值以注浆前的1/50（渗透系数为2×10-6 cm/s）为宜,并应结合实际进行技术经济对比,合理确定现场注浆参数。     

沉管隧道变截面管段浮运水流力及系缆桩可靠性分析

为探索沉管隧道变截面管段浮运过程的水流力与系缆桩可靠性,以广州洲头咀沉管隧道为依托,借助CFD软件建立流体动力学模型,计算管段横向浮运所受的水流力并探讨规范水流力公式的适用性;以此为基础,利用ANSYS开展管段浮运系缆桩可靠性分析。研究表明： 1) 规范水流力公式具备一定的适用性,采用结构形式为矩形梁时对应的水流阻力系数会导致与数值计算结果存在不容忽视的差别,通过CFD计算结果修正后两者吻合较好; 2) 系缆桩处于弹性受力状态,刚度与强度均未被削弱,设计方案可满足浮运安全要求; 3) 钢丝绳拉力作用下管段结构混凝土处于带裂缝工作状态,需基于计算结果对系缆桩预埋件锚固区做局部加强以抑制裂缝发展。     

Numerical Analysis of the Mixture Formation in a Two-Stroke Wall-Guided LPG DI Engine for Extended-Range Electric Vehicle

The use of automotive LPG characteristics which are easy to evaporate vaporization and carry. The paper presents a design of extended-range electric vehicle for wall-guided two stroke LPG engine with direct injection combustion system. Based on the modified vehicle LPG spray model, a database describing the characteristics of vehicle LPG fuel was built and imported into the CFD software. And the accuracy of the model is verified by the Schlieren experimental results. The concentration and velocity field of the mixture in the cylinder under different load conditions are numerically analyzed. The analyzed result indicated that the start injection time θ = 60°–70°CA BTDC under part load condition, the plug electrode near the gathering of a richer mixture is easy to be fired at spark ignition time, the obvious formation of mixture in cylinder is formed and the overall air-fuel ratio is above 40: 1. The start-transition working condition and large load conditions in the piston moves upward before closing the exhaust port to start injection LPG. The optimized LPG injection start time θ ensures that the fresh gas is locked in the cylinder when the exhaust port is closed (63°CA ABDC). In the ignition time of the spark plug, an ideal homogeneous mixture in the cylinder is realized.     

Urban travel time reliability at different traffic conditions

The decision making of travelers for route choice and departure time choice depends on the expected travel time and its reliability. A common understanding of reliability is that it is related to several statistical properties of the travel time distribution, especially to the standard deviation of the travel time and also to the skewness. For an important corridor in Changsha (P.R. China) the travel time reliability has been evaluated and a linear model is proposed for the relationship between travel time, standard deviation, skewness, and some other traffic characteristics. Statistical analysis is done for both simulation data from a delay distribution model and for real life data from automated number plate recognition (ANPR) cameras. ANPR data give unbiased travel time data, which is more representative than probe vehicles. The relationship between the mean travel time and its standard deviation is verified with an analytical model for travel time distributions as well as with the ANPR travel times. Average travel time and the standard deviation are linearly correlated for single links as well as corridors. Other influence factors are related to skewness and travel time standard deviations, such as vehicle density and degree of saturation. Skewness appears to be less well to explain from traffic characteristics than the standard deviation is.     

新型混联式混合动力客车动力系统结构与控制策略设计

简要介绍一种新型混联式混合动力客车动力系统的结构;重点介绍系统结构、控制策略方面的设计;详细分析系统在多种控制策略下的运行模式及主要技术特点。     

某轿车副车架模态分析

本文通过用Hypemesh11.0进行网格划分,然后用MSC.NASTRAN进对某轿车副车架进行模态分析,以确定冲压横梁结构是否能够达到原液压横梁结构的模态固有频率,为制定工艺方案提供支持,也为以后同类产品的研发提供设计参考。     

基于GT-Suite的重型载货车冷却系统仿真及匹配设计

基于GT-Suite软件建立了某重型载货车发动机冷却系统的一维-准三维混合仿真模型,通过对发动机极限工况下出水温度、出水流量等计算结果与试验值对比分析,验证了仿真模型的准确性。最后在此模型基础上对发动机冷却系统进行风扇选型匹配,实现了满足整车冷却性能要求的前提下,减小了其消耗功率,从而提高了整车经济性。     

公路隧道LED照明模拟控制系统设计

为更有效地设计隧道照明,针对隧道LED照明模拟设计欠缺的现状,基于Zigbee无线通信研发了隧道LED照明模拟控制系统,提出并设计了车载照度采集装置,实现对隧道内亮度的连续检测。实验分析表明:车载照度采集装置误差在-5.69%~3.06%之间,隧道模型设计亮度误差在-4.49%~5.57%之间,具有较高的可靠性。最后,研究成果已应用到隧道照明改造的模拟设计中,改造后节能百分比达53.6%。