国外舰艇综合电力系统研究综述

舰艇综合电力系统实现了全舰能源的综合利用,是舰艇平台由机械化向电气化和信息化发展的必由之路,代表现代舰艇动力平台的发展方向.本文通过对国外舰艇综合电力系统应用现状、技术状态、军事意义及未来发展趋势进行分析梳理,供相关人员参考.     

长撑杆双颚板绳索抓斗自重的确定及其在抓斗各部件上的分配比例

主要阐述抓斗的主要参数之一——抓斗自重及其在抓斗各部件上的分配比例对抓斗性能的影响;抓斗抓取量与抓斗自重、散货物理-力学性质之间的关系,提出了如何合理确定抓斗自重及其在抓斗部件上的分配比例的方法。     

PHC桩损伤处应力释放与水平受力影响分析

基于大型有限元软件ANSYS建立单桩有限元模型,以某5万DWT高桩码头为例,计算分析PHC桩在桩基完整性检测割桩处的应力释放以及损伤对水平承载的影响。结果表明:PHC桩在割桩损伤处应力释放明显,损伤区域应力变化剧烈,损伤处应力变化规律和应力集中系数与桩的预应力水平无关;水平荷载作用时PHC桩的预应力对于提高损伤桩的抗裂效果明显,损伤处受应力集中影响,预应力水平越高损伤处应力变化越大,而且最不利应力位置也下移到损伤平台内侧处。     

Property Evolution of Sulphoaluminate Grouting Material under Pressure Circulation北大核心CSCD

Water-sealed underground oil tank projects are quite different from traditional underground projects since the water-sealing conditions are very strict and the difficulties caused by the geological specificity, structural specificity and construction specificity are key factors affecting the project. In light of the significant early initial setting time and rapid temperature increase of sulphoaluminate cement-based grouting material for a large domestic water-sealed underground oil tank with pressurized cyclic grouting, a laboratory grouting simulation is conducted. It is found that the properties of the sulphoaluminate cement-based grouting material are quite different under different pressure cycles, the hydration exothermic peak time gets shorter with an increase of circulation time, the compressive strength decreases with an increase of circulation time, and the longer the circulation time the more obvious the de-crease of compressive strength. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Context-dependent influence of road attributes and pricing policies on route choice behavior of truck drivers: results of a conjoint choice experiment

In this paper, we report the results of a stated choice experiment, which was conducted to examine truck drivers?? route choice behavior. Of particular interest are the questions (i) what is the relative importance of road accessibility considerations via-a-vis traditional factors influencing route choice behavior, (ii) what are the influences of particular personal and situational variables on the evaluation of route attributes, (iii) how sensitive are truck drivers for possible pricing policies, and (iv) is there a difference in impact if environmental concerns are framed as a bonus or as a pricing instrument. The main findings indicate that road accessibility characteristics have a substantial impact on route preferences which is of the same order of magnitude as variation in travel times. This suggests that provision of adequate travel information in itself can be an effective instrument to prevent negative externalities of good transport associated with shortest routes. Furthermore, the results indicate that truck drivers/route planners when choosing a route are relatively sensitive to road pricing schemes and rather insensitive to environmental bonuses.     

Tradeoffs among free-flow speed, capacity, cost, and environmental footprint in highway design

This paper investigates differentiated design standards as a source of capacity additions that are more affordable and have smaller aesthetic and environmental impacts than modern expressways. We consider several tradeoffs, including narrow versus wide lanes and shoulders on an expressway of a given total width, and high-speed expressway versus lower-speed arterial. We quantify the situations in which off-peak traffic is sufficiently great to make it worthwhile to spend more on construction, or to give up some capacity, in order to provide very high off-peak speeds even if peak speeds are limited by congestion. We also consider the implications of differing accident rates. The results support expanding the range of highway designs that are considered when adding capacity to ameliorate urban road congestion.     

船用控制台电磁兼容结构设计探讨

随着现代计算机网络技术和智能控制技术的不断进步,对电气控制设备箱体电磁兼容的要求越来越高。本文结合某电磁兼容控制台提出了一种电磁兼容的台体结构设计与同行探讨:设计横截面呈"U"字形及平面矩形的不锈钢框架,与碳钢材料台体壳壁门框孔处以焊接形式固定,配置电磁兼容密封材料,形成完整的电磁兼容结构。实践证明:电磁干扰测试和电磁敏感度测试符合设备正常工作要求,结构简洁,可靠性好,便于MACAD制造。     

管棚超前支护在平顶直墙隧道中的优化设计

管棚法作为浅埋暗挖隧道的一种辅助工法在防止隧道塌方、控制地层位移方面发挥着重要作用.管棚设计需要确定两个基本参数--间距、截面尺寸.而管棚的设计理论还不够成熟.文章引入土拱原理可以计算管棚的最大间距;而对于截面尺寸.提出在弹性地基梁法的基础上,考虑隧道开挖影响并结合增量法进行计算较为合理.同时认为,两个基本参数的相互影响必须综合考虑,假定管棚直径进行间距设计,应根据管棚受力分析进行校核,通过多次循环假定、计算、校核以得到较为合理的管棚设计参数.     

车辙仪技术发展水平综述

回顾车辙研究的背景,简介车辙仪的类型及其特点,论述影响沥青路面抗车辙性能的因素,展望车辙仪发展的方向。     

Review of Secure Communication Approaches for In-Vehicle Network

In the connected vehicles, connecting interfaces bring threats to the vehicles and they can be hacked to impact the vehicles and drivers. Compared with traditional vehicles, connected vehicles require more information transfer. Sensor signals and critical data must be protected to ensure the cyber security of connected vehicles. The communications among ECUs, sensors, and gateways are connected by in-vehicle networks. This paper discussed the state-of-art techniques about secure communication for in-vehicle networks. First, the related concepts in automotive secure communication have been provided. Then we have compared and contrasted existing approaches for secure communication. We have analyzed the advantages/disadvantages of MAC and digital signatures for message authentication and compared the performance and limitations of different cryptographic algorithms. Firewall and intrusion detection system are introduced to protect the networks. The constraints and features of different intrusion detection approaches are presented. After that, the technical requirements for cryptographic mechanism and intrusion detection policy are concluded. Based on the review of current researches, the future development directions of the automotive network security have been discussed. The purpose of this paper is to review current techniques on automotive secure communication and suggest suitable secure approaches to implement on the in-vehicle networks.