Optimal Linear Active Suspensions with Vibration Absorbers and Integral Output Feedback Control

The bandwidth of the body response to a road input in an active suspension may be considerably reduced if the axle motions are independently controlled and if, at the same time, the effects of static and dynamic loads are counteracted by integral action in the body force control system. The paper presents a further application of the Ferguson-Rekasius method, leading to optimal output control with incomplete state feedback. To achieve narrow bandwidth body response the support springs are replaced by hydraulic actuators, and vibration absorbers or active wheel dampers are employed for the control of the axle motions. Active wheel damping is the more effective and gives good results. Proportional-plus-integral control action is shown to reduce the transient body displacements due to external forces.     

水下储供油系统输油软管压块重力和数量的研究

软管是指沿海地面从座沉海底的水下储供油系统铺设到海面的橡胶管。研究了软管所受的波浪力和海流力的大小 ,给出了为保证软管稳定时加载在软管上的压块的重力和压块数量 ,讨论了如何处理处于 2个水域区段的某软管段的受力计算     

耐碰撞车辆的能量吸收要求

对耐碰撞车辆的设计能量进行了研究.线性分析的方法已经被证明对于弄清楚两列车碰撞的作用情况,尤其是两车辆间相互作用的情况非常有用.介绍了首端和中间端的能量吸收要求的计算公式.这是从5种不同列车的模拟计算中推导出来的,可以应用于所有轨道上的车辆碰撞.     

Shallow water processes govern system-wide phytoplankton bloom dynamics: A modeling study

A pseudo-two-dimensional numerical model of estuarine phytoplankton growth and consumption, vertical turbulent mixing, and idealized cross-estuary transport was developed and applied to South San Francisco Bay. This estuary has two bathymetrically distinct habitat types (deep channel, shallow shoal) and associated differences in local net rates of phytoplankton growth and consumption, as well as differences in the water column's tendency to stratify. Because many physical and biological time scales relevant to algal population dynamics decrease with decreasing depth, process rates can be especially fast in the shallow water. We used the model to explore the potential significance of hydrodynamic connectivity between a channel and shoal and whether lateral transport can allow physical or biological processes (e.g. stratification, benthic grazing, light attenuation) in one sub-region to control phytoplankton biomass and bloom development in the adjacent sub-region. Model results for South San Francisco Bay suggest that lateral transport from a productive shoal can result in phytoplankton biomass accumulation in an adjacent deep, unproductive channel. The model further suggests that turbidity and benthic grazing in the shoal can control the occurrence of a bloom system-wide; whereas, turbidity, benthic grazing, and vertical density stratification in the channel are likely to only control local bloom occurrence or modify system-wide bloom magnitude. Measurements from a related field program are generally consistent with model-derived conclusions.     

How do local actions affect VMT? A critical review of the empirical evidence

In this paper, we present a discussion of the challenges for research on the topic of vehicle miles traveled. We then summarize and critique evidence from the US on the association between 14 distinct factors and vehicle miles traveled. Our results quantify how much vehicle miles traveled can be expected to change in response to changes in policy or land use factors, including residential density and land use mix, as well as specific transport policies and programs such as transit improvements, road pricing, and programs aimed at changing people’s travel choices. Overall, though individual studies differ as to exact effect sizes, it is clear that local-level policymakers can take actions that are likely to affect vehicle miles traveled. However, we highlight gaps in the knowledge base at a time when decision makers at the local level are being increasingly called upon to take action to reduce vehicle miles traveled. Variation in effect size based on local context or interaction with related policies and programs has been left largely unexplored. In addition, experimental research designs that can identify causal direction are rare, and appropriate data that quantifies vehicle miles traveled are often lacking.     

Feasibility of using time–space prism to represent available opportunities and choice sets for destination choice models in the context of dynamic urban environments

H?gerstrand??s original framework of time geography and the subsequent time?Cspace prism computational methods form the foundation of a new computational method for potential path areas (PPA) in a realistic representation of dynamic urban environments. In this paper the time?Cspace prism framework is used to assess sensitivity of PPA size to different parameters and to build choice sets for regional destination choice models. We explain the implication of different parameters to choice set formation in a step-wise manner and illustrate not only the complexity of the idea and the high computational demand but also behavioral realism. In this context, this paper tests the feasibility of using constraint-based time?Cspace prism to find the choice sets for a large-scale destination choice model, and identifies a variety of implementation issues. Computational demand is estimated based on a household travel survey for the Southern California Association of Government, and the feasibility of using time?Cspace prisms for destination choice models is assessed with different levels of information on the network and destinations available. The implications of time of day effects and flexibility in scheduling on choice set development due to varying level of service on the network and availability of activity opportunities are discussed and numerically assessed.     

An analysis of the factors influencing differences in survey-reported and GPS-recorded trips

Recent advances in global positioning systems (GPS) technology have resulted in a transition in household travel survey methods to test the use of GPS units to record travel details, followed by the application of an algorithm to both identify trips and impute trip purpose, typically supplemented with some level of respondent confirmation via prompted-recall surveys. As the research community evaluates this new approach to potentially replace the traditional survey-reported collection method, it is important to consider how well the GPS-recorded and algorithm-imputed details capture trip details and whether the traditional survey-reported collection method may be preferred with regards to some types of travel. This paper considers two measures of travel intensity (survey-reported and GPS-recorded) for two trip purposes (work and non-work) as dependent variables in a joint ordered response model. The empirical analysis uses a sample from the full-study of the 2009 Indianapolis regional household travel survey. Individuals in this sample provided diary details about their travel survey day as well as carried wearable GPS units for the same 24-h period. The empirical results provide important insights regarding differences in measures of travel intensities related to the two different data collection modes (diary and GPS). The results suggest that more research is needed in the development of workplace identification algorithms, that GPS should continue to be used alongside rather than in lieu of the traditional diary approach, and that assignment of individuals to the GPS or diary survey approach should consider demographics and other characteristics.     

Galvanic interactions of HE15 /MDN138 & HE15 /MDN250 alloys in natural seawater

HE15 is a heat treatable high strength alloy with excellent machinability find wide applications in aerospace and defence industries. In view of their excellent mechanical properties, workability, machinability, heat treatment characteristics and good resistance to general and stress corrosion cracking, MDN138 & MDN250 have been widely used in petrochemical, nuclear and aerospace industries. The galvanic corrosion behaviour of the metal combinations HE15 /MDN138 and HE15 /MDN250, with 1:1 area ratio, has been studied in natural seawater using the open well facility of CECRI’s Offshore Platform at Tuticorin for a year. The open circuit potentials of MDN138, MDN250 and HE15 of the individual metal, the galvanic potential and galvanic current of the couples HE15 /MDN138 and HE15 /MDN250 were periodically monitored throughout the study period. The calcareous deposits on MDN138 and MDN250 in galvanic contact with HE15 were analyzed using XRD. The electrochemical behaviors of MDN138, MDN250 and HE15 in seawater have been studied using an electrochemical work station. The surface characteristics of MDN138 and MDN250 in galvanic contact with HE15 have been examined with scanning electron microscope. The results of the study reveal that HE15 offered required amount of protection to MDN138 & MDN250.     

Application of Chinese Characters in the Design and Construction of the Badaling Great Wall Station of the Beijing-Zhangjiakou High-Speed Railway北大核心CSCD

The new Badaling tunnel is the longest tunnel on the under-construction Beijing-Zhangjiakou highspeedrailway, with the Badaling Great Wall station to be built in the tunnel. This station, which is under the Badaling Great Wall historic site, is the world’s largest underground high-speed railway station with the most complicated structure and the largest overburden and excavation area. It is therefore a representative project for China’s highspeed railway development strategy, supporting infrastructure facilities for the Beijing Horticultural Expo 2019 and the 2022 Winter Olympics in Beijing, and it is important that it be of high quality and completed safely. In the de-sign and construction of the station, the glyphs of the Chinese characters of "中",”国”,”人”and”品”are used, re-spectively, along the station route, in the rescue and evacuation mode, auxiliary adit and partial excavation, which is a way to successfully integrate the art of Chinese characters into tunnel engineering. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Application of Vertical Freezing Technique in the Deep-buried Mountain Railway Tunnel北大核心CSCD

The strata of Chengershan tunnel is mainly consist of the slightly cemented tertiary sandstone, the tun⁃ nel body passes through F 2 fault core zone. Geological disasters of mud outburst, sand gushing and extrusion of work face occurred several times during tunnel construction, so the risks are very high. In view of the core zone of F 2 fault with high pressure and abundant water, a variety of construction schemes were compared and analyzed in terms of technology, feasibility and safety, and vertical freezing technique was used for stratum reinforcement in the railway tunnel for the first time, furthermore the freezing scheme and tunnel support measures were studied, providing refer⁃ ence and guidance for similar tunnel construction.Mountain railway tunnel; Fault zone; Tertiary sandstone; Vertical freezing technique; Application © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.