浅谈低质量船舶的检查

通过总结工作经验，分析了低质量船舶的特点，阐述了对低质量船舶检查的方法。     

辽宁航运服务现状分析及能力提升策略研究

近年来,国家高度注重航运企业服务能力建设,航运服务业开放性发展程度进一步提升.辽宁航运服务业以基础航运服务为主,高端航运服务能力不足.文章分析了辽宁航运服务现状,针对服务能级较低、航运高端人才匮乏、航运服务评价体系不完善等方面提出建议、对策,以提升辽宁国际航运服务能力.     

南海某FPSO STP单点系泊系统的再评估

本文针对一艘中国南海北部服役的STP(Submerged Turret Production)内转塔单点FPSO在极端环境条件下单点静密封失效问题进行了分析。STP浮筒静密封主要依靠浮筒上端液压大钳的预紧力、浮筒与舱壁的静摩擦力等来抵抗系泊系统的载荷,从而保证浮筒与船体舱壁的紧密贴合。本文进行了新旧百年一遇环境条件作用下系泊系统载荷评估分析,比较结果可以发现：在新的百年一遇条件作用下,单点系泊系统的最大系泊缆张力增加31%,相应地系泊系统作用在锚链盘的平面载荷增加33%,垂向载荷增加12%。进一步地进行了新环境条件下两百年一遇极端环境作用下的系泊系统响应分析,比较结果可以发现：两百年一遇环境条件作用下,平台平面位移、系泊缆最大张力以及系泊载荷均出现了不同程度的增加,此时系泊缆已不能满足系泊系统完整状态的安全系数要求。分析结果表明：该FPSO的STP静密封系统在新的环境条件下存在较大失效风险,有必要对液压锁紧装置进行优化和加强设计,浮筒与舱壁有必要重新进行结构强度评估。     

荷坳隧道四洞小净距段支护结构设计研究北大核心CSCD

多洞空间小净距隧道支护结构参数量化设计与安全性分析是当前设计中的一大难题。文章针对深圳机荷高速公路荷坳隧道四洞小净距段的设计,采用总安全系数法对四洞的开挖与支护模式、各洞的开挖顺序及支护参数进行了研究比较,并采用隧规荷载-结构法、增量法、地层-结构法对支护结构的安全系数进行了对比计算,得出以下结论:(1)提出了基于总安全系数法原理的多洞空间小净距隧道设计方法;(2)根据总安全系数法得出了荷坳隧道四洞小净距段应采用“先行洞二次衬砌完成后再开挖下一孔隧道”的开挖与支护模式,且应按洞1→洞2→洞3→洞4的开挖顺序施工;(3)隧规荷载-结构法、增量法、地层-结构法虽无法得出结构的总承载安全系数,但在一定程度上可以反应部分支护结构的安全性。     

Modeling traffic operation at signalized intersections without explicit left‐turn yielding rules with an enhanced cell transmission model

This paper presents an enhanced cell transmission model (CTM) to capture traffic operation at signalized intersections without explicit permissive left‐turn yielding rules (i.e. aggressive permissive left‐turn maneuvers may not necessarily yield to opposing through traffic), which can be widely observed in many developing countries. Different from previous studies that focus on traffic dynamics on approaching links, this study contributes to modeling traffic operations within the intersection. A novel cell transmission framework with various types of virtual cells is proposed to model the dynamics of traffic movements from approach to exit. The unique phenomenon of competitive occupying of the conflict point between the left turn and opposing through movements is modeled. The cell state indicating its blockage is proposed to capture the dynamic queue formulation and dissipation and to evaluate the operational traffic performance at the intersection. Field validation results show that the proposed model can capture the operation of traffic at signalized intersections without explicit permissive left‐turn yielding rules with significantly higher level of accuracy than traditional traffic flow models. Copyright © 2016 John Wiley & Sons, Ltd.     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

隧道开挖中的应力旋转和裂隙塑性变形问题研究

通过对隧道开挖过程进行三维数值模拟,分析了隧道开挖过程中主应力方向的旋转变化,研究了主应力旋转与隧道裂隙塑性变形的关系,验证了"考虑应力主轴旋转的广义塑性原理"的正确性,并将数值模拟结果和相关试验成果进行了对比,得出了一致性的结论。研究结果表明,应力旋转基本在隧道开挖前后10 m左右的距离内完成,隧道开挖过程中的应力旋转可以引起裂隙塑性变形的突变,且对竖向和斜向裂隙的影响较大;可以根据应力旋转的变化规律合理地选择支护时机,依据应力旋转对裂隙的影响对隧道的重点部位进行超前加固。     

Modeling the interactions between car and bicycle in heterogeneous traffic

In this paper, a new cellular automata model is proposed to simulate the car and bicycle heterogeneous traffic on urban road. To capture the complex interactions between these two types of vehicles, a novel occupancy rule is adopted in the proposed model to consider the variable lateral distances of mixed vehicular traffic. Based on massive simulations, microscopic fundamental diagrams under different bicycle densities are devised. With these, the bicycle's spilling behavior is then investigated and discussed. In order to reflect the interference of a bicycle on a car, the interference transformation from friction state to block state is modeled explicitly. Finally, different simulation results under different occupancy rules indicate that the constant and fixed occupancy rule adopted in the previous studies might lead to overestimation of car flux in the heterogeneous traffic flows with different bicycle densities. Copyright © 2013 John Wiley & Sons, Ltd.     

汽车传动系最优匹配评价指标的探讨

本文探讨了汽车动力传动系统最优匹配的评价指标,提出了动力性发挥程度的评价指标——驱动功率损失率、经济性发挥程度的评价指标——有效效率利用率、用能量效率指标来统一汽车动力性与燃油经济性指标,并以上述三个指标作为动力传动系统最优匹配的评价指标。     

变断面钢板弹簧的设计计算

本文对各片不等长的变断面钢板弹簧进行了深入的研究,并建立了全面系统的设计计算方法。