转盘式分块组合顶盖胎具的设计与应用

转盘式分块组合顶盖胎具的设计与应用,能降低胎具制作费用,加快新车型上线的时间,并减少胎具存放空间。     

Prevalence of alternative processing rules in the formation of daily travel satisfaction in the context multi-trip,multi-stage,multi-attribute travel experiences

Transportation - Requesting respondents to provide satisfaction ratings for multi-stage trips or daily travel experiences implies they have to value each stage, respectively trip, based on memory...     

Modelling sequential ticket booking choices during Chinese New Year

Transportation - Transport systems in China face extreme capacity shortages during the Spring Festival travel season. This study therefore explores traveler’s decision making behavior when...     

AEB与可逆预紧安全带联合作用下乘员保护效果研究

针对自动紧急制动系统(AEB)导致乘员在碰撞前出现身体前倾和离位的现象,提出了使用可逆预紧安全带可以改善该现象,并且研究了在AEB和可逆预紧的联合作用下对不同坐姿乘员的保护效果.建立了某车型驾驶员侧包括正常坐姿和四种离位坐姿的约束系统仿真模型,并进行了验证.以五种坐姿乘员为研究对象,分别对比无AEB无可逆预紧,有AEB...     

Modeling traffic operation at signalized intersections without explicit left‐turn yielding rules with an enhanced cell transmission model

This paper presents an enhanced cell transmission model (CTM) to capture traffic operation at signalized intersections without explicit permissive left‐turn yielding rules (i.e. aggressive permissive left‐turn maneuvers may not necessarily yield to opposing through traffic), which can be widely observed in many developing countries. Different from previous studies that focus on traffic dynamics on approaching links, this study contributes to modeling traffic operations within the intersection. A novel cell transmission framework with various types of virtual cells is proposed to model the dynamics of traffic movements from approach to exit. The unique phenomenon of competitive occupying of the conflict point between the left turn and opposing through movements is modeled. The cell state indicating its blockage is proposed to capture the dynamic queue formulation and dissipation and to evaluate the operational traffic performance at the intersection. Field validation results show that the proposed model can capture the operation of traffic at signalized intersections without explicit permissive left‐turn yielding rules with significantly higher level of accuracy than traditional traffic flow models. Copyright © 2016 John Wiley & Sons, Ltd.     

隧道开挖中的应力旋转和裂隙塑性变形问题研究

通过对隧道开挖过程进行三维数值模拟,分析了隧道开挖过程中主应力方向的旋转变化,研究了主应力旋转与隧道裂隙塑性变形的关系,验证了"考虑应力主轴旋转的广义塑性原理"的正确性,并将数值模拟结果和相关试验成果进行了对比,得出了一致性的结论。研究结果表明,应力旋转基本在隧道开挖前后10 m左右的距离内完成,隧道开挖过程中的应力旋转可以引起裂隙塑性变形的突变,且对竖向和斜向裂隙的影响较大;可以根据应力旋转的变化规律合理地选择支护时机,依据应力旋转对裂隙的影响对隧道的重点部位进行超前加固。     

Modeling the interactions between car and bicycle in heterogeneous traffic

In this paper, a new cellular automata model is proposed to simulate the car and bicycle heterogeneous traffic on urban road. To capture the complex interactions between these two types of vehicles, a novel occupancy rule is adopted in the proposed model to consider the variable lateral distances of mixed vehicular traffic. Based on massive simulations, microscopic fundamental diagrams under different bicycle densities are devised. With these, the bicycle's spilling behavior is then investigated and discussed. In order to reflect the interference of a bicycle on a car, the interference transformation from friction state to block state is modeled explicitly. Finally, different simulation results under different occupancy rules indicate that the constant and fixed occupancy rule adopted in the previous studies might lead to overestimation of car flux in the heterogeneous traffic flows with different bicycle densities. Copyright © 2013 John Wiley & Sons, Ltd.     

PA66-GF30透光率对激光透射焊接性能的影响

通过对不同及相同厚度的本色和黑色激光透射PA66-GF30材料进行透光率测试,对焊接后的试样进行拉拔测试.文章分析了厚度对透光率的影响,相同厚度材料颜色、透光率对焊接强度的影响.结果表明,随着厚度的升高材料透光率下降;相同厚度材料的透光率升高,其焊接强度也依次升高,且本色与黑色的PA66-GF30焊接强度要高于黑色与黑...     

一种汽车外饰双色零件注塑模具设计与研究

以某车型汽车双色前大灯装饰盖为例,通过对零件结构进行改进、优化,相应注塑模具结构进行改进,采用合理的模具结构设计方案,提出了倒装双色注塑模具新方案,从而解决了该零件可以实现双色注塑生产.     

汽车轮胎爆胎测试试验及其相关安全控制技术研究综述

汽车轮胎安全及其测试技术是汽车技术研究的重要方面.在对国内外汽车轮胎安全及其技术法规的分析的基础上,梳理汽车轮胎安全性能的主要指标的试验方法及现有相关技术研究现状,特别是对轮胎爆胎安全控制及其测试试验技术方面进行分析,提出未来车轮胎爆胎安全控制及测试技术研究的重点内容和发展方向,预测未来的发展趋势.