水平旋喷桩施工工艺在深圳地铁施工中的应用

在深圳地铁安托山站—侨香站区间矿山法隧道超前支护施工中,由于采用了水平旋喷桩施工工艺,成功地解决了安-侨区间暗挖隧道在饱和粉细砂层及砾砂层中近距离穿越大断面雨水箱涵及φ500 mm次高压燃气管线的难题,节约了施工成本,充分显示了水平旋喷桩施工工艺在富水砂层浅埋暗挖隧道开挖预支护工程应用上的经济优势。文章论述了水平旋喷桩的工艺机理、适应性、优缺点以及在该工程中的应用效果。     

Property Evolution of Sulphoaluminate Grouting Material under Pressure Circulation北大核心CSCD

Water-sealed underground oil tank projects are quite different from traditional underground projects since the water-sealing conditions are very strict and the difficulties caused by the geological specificity, structural specificity and construction specificity are key factors affecting the project. In light of the significant early initial setting time and rapid temperature increase of sulphoaluminate cement-based grouting material for a large domestic water-sealed underground oil tank with pressurized cyclic grouting, a laboratory grouting simulation is conducted. It is found that the properties of the sulphoaluminate cement-based grouting material are quite different under different pressure cycles, the hydration exothermic peak time gets shorter with an increase of circulation time, the compressive strength decreases with an increase of circulation time, and the longer the circulation time the more obvious the de-crease of compressive strength. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

虚拟船舶中压电站系统设计

虚拟船舶中压电站系统以实际船舶的中压电站为原型。系统利用组态软件PIMS作为开发平台,通过数据库构建、人机交互界面设计及程序脚本的编写,实现虚拟船舶中压电站系统的各项操作功能。本系统是一个开放的系统,功能可以拓展。系统可以网络发布,在学员培训方面具有良好的应用前景。     

浅海锆钛砂矿采选一体船“泰鑫1”设计研究

主要介绍了我国首艘浅海锆钛砂矿采选一体船的设计背景、主要技术参数和功能,并进一步重点论述了本船总体设计、采矿系统、选矿系统、总纵强度计算和高压岸电系统的设计思路和成果,以供今后开发类似船型的行业同仁借鉴。     

基于虚拟边界条件一维搜索预报的并行算法

对网格方程组作多重网格区域分裂并行计算,虚拟边界预报提出一维搜索算法,并讨论相应的收敛性,通过ＧＳ迭代的性质,构造区间压缩算法,证明了其收敛性,指出此算法能有效地解决区域分裂并行计算中的远程信息传递和频繁通讯问题。     

250km／h高速铁路轨道不平顺的安全管理

利用根据车辆－轨道耦合动力学思想所建立车辆－轨道垂横耦合模型,在充分考虑多种波长并存的情况下,仿真计算了250km/h高速铁路各种轨道不平顺的管理目标值。计算结果与日本和德国高速铁路轨道不平顺的经验管理目标值基本一致。     

EFFECT OF La-RICH RE ON THE STRUCTURE AND PROPERTIES OF B319 ALLOY IN LOST FOAM CASTING

IntroductionLost foam casting( LFC) process is a newtechnology that is different from the conventionalempty mould cavity casting completely.This tech-nology is an important orientation of casting tech-nology,and is called as casting technology for to-morrow.At present,the studies on LFC are fo-cused on casting techniques mainly[1～ 5] .There islittle information on the structure and mechanicalproperties of B31 9in LFC process.Now for alu-minum alloy in LFC process,the main problemsare se…     

水位与航道通航能力的关系研究

水位高低与航道通航能力大小息息相关,对大型船舶(队)通过某些典型航段时尤为重要.为保障船舶航行安全,充分发挥航道通航能力,针对长江航道的特点,在总结有关剩余水深规定的基础上,分析典型船舶载重与吃水的关系,对航道通航能力进行研究,提出运用水位(或水深)预报航道通航能力的方案,对于航运管理和规划有较大的参考价值.     

适用于一票制公交大数据的系统化处理方法及应用 ——以银川市为例

为分析公交乘客出行特征,利用公交IC卡数据、公交GPS数据、车载机数据和单程站点关系表,通过各类数据关联融合,提出适用于一票制公交大数据的系统化处理方法。基于Oracle搭建分析数据库,采用Python语言编写代码,构建了乘客上车站点推断算法、基于出行链的乘客下车站点推断算法、基于概率的乘客下车站点推断算法和乘客换乘站点识别算法4种站点推断算法。基于此,运用银川公交大数据进行客流集散点识别、客流走廊识别,得到公交站点上下客流量分布情况、公交线路客流量分布情况、公交站点的换乘客流量分布情况。研究结果表明,一票制公交大数据系统化处理方法在分析公交乘客出行特征方面具有一定的应用价值。