使用乙醇还原剂的NOx-SCR催化剂的性能评价

采用计算机辅助分析的方法设计了乙醇还原剂添加装置，并使用这套装置在发动机台架上进行了稀燃NOx选择催化还原（SCR）催化剂的性能评价试验。试验结果表明，在30000h^-1空速、排温为350～420℃范围的条件下，该催化剂的NOx转化率维持在90％以上，而在低温和高温下的转化率较低；随着乙醇添加量的增加，催化剂NOx转化率提高，但同时会增加THC排放；当空速超过40000h^-1后，催化剂性能有所下降。     

全承载式车身结构浅析

简要说明了客车全承载车身技术的重要性和全承载车身的优越性；阐述了全承载车身的发展历程和在我国的应用现状，最后详细说明了全承载车身结构的特点及优点，使我们对于全承载车身结构技术有了一个更全面的认识。     

Target priority determination methods by interval-valued intuitionistic fuzzy sets with unknown attribute weights

The paper aims at the problem of multi-targets threat degree being hard to be evaluated accurately in complex air defense battlefield environments. Combined with multi-sensors information fusion and interval-valued intuitionistic fuzzy sets (IVIFS) theories, the target priority determination is studied. The score and accuracy functions of IVIFS are improved with thinking about the hesitating information in order to increase the rationality. Then, the influence factors of target priority and the nonlinear relationship between the influence factors and target priority are analyzed. Next, the algorithms for calculating the factor weights and sensor weights are given. Based on the theory of IVIFS and technique for order preference by similarity to an ideal solution (TOPSIS), two methods of target priority determination based on the IVIFS and TOPSIS are proposed. At last, an application example verifies the effectiveness and flexibility of the proposed algorithms.     

资源节约型航道建设在京杭运河浙江段提升改造中的理论与实践

京杭运河是我国纵贯南北的内河水运大通道，浙江段担负着我省经济发展所需大众货物的运输任务。文章运用资源节约型航道建设理论，在京杭运河浙江段提升改造工程中进行实践，为其他航道提升改造提供了样板。     

Elasto-plastic modeling of soft soil considering degradation of stiffness

The stiffness has a large influence on the behavior of soils. Its value is affected by some of the soils properties, such as the over consolidated ratio(OCR), the effective normal stress, and the plasticity index etc. In this paper, the numerical modeling of soft soils was carried out using an improved elasto-plastic S-clay1 model accounting for degradation of stiffness. The relation between the stiffness and the shear strain was established based on a large number of experimental data. The effects of strain-dependent stiffness of normally consolidated soils and over consolidated soils on the stress-strain behavior were studied through a comparison of the simulations with the experimental results of undrained triaxial compression tests. The results show that the behaviors of soils can be well predicted with the improved constitutive model, particularly before the peak stress.     

Decomposing and Cluster Refinement Design Method for Application-Specific Network-on-Chips

Along with higher and higher integration of intellectual properties (IPs) on a single chip, traditional bus-based system-on-chips (SoC) meets several design difficulties (such as low scalability, high power consumption, packet latency and clock tree problem). As a promising solution, network-on-chips (NoC) has been proposed and widely studied. In this work, a novel algorithm for NoC topology synthesis, which is decomposing and cluster refinement (DCR) algorithm, has been proposed to minimize the total power consumption of application-specific NoC. This algorithm is composed of two stages: decomposing with cluster generation, and cluster refinement. For partitioning and cluster generation, an initial low-power solution for NoC topology is generated. For cluster refinement, the clustering is optimized by performing floorplan to further reduce power consumption. Meanwhile, a good tradeoff between power consumption and CPU time can be achieved. Experimental results show that the proposed method outperforms the existing work.     

粉煤灰地层浅埋大断面连拱隧道预加固方式研究

由于粉煤灰地层本身工程性质较差,隧道开挖时不同工序及支护方式的变化也极易影响掌子面的稳定及支护结构的安全.本文结合盐坪坝隧道埋深浅、跨度大、穿越不良地层粉煤灰地层的特点,对浅埋暗挖大断面隧道工程中常用的地层预加固方式做简要介绍并分析其适用性,结合现场实际,提出了一种适用于粉煤灰地层大断面连拱隧道的预加固技术,主要采用高压旋喷桩对穿越粉煤灰地段实施地表加固,从现场施工情况来看,盐坪坝隧道现已成功贯通,期间没有发生掌子面坍塌、地表沉陷等情况.     

基于Ansys的矩形加筋平盖封头强度评定

将有限元方法与分析设计相结合,利用有限元分析软件Ansys对一种矩形加筋平盖封头进行强度评定。本文首先介绍瓶盖封头结构的改进。然后建立有限元模型,并进行应力求解。结果表明,此加筋平盖封头满足强度要求,与普通平盖封头相比,减小了平盖的厚度,降低了结构总重量,对平盖封头的结构改进设计具有一定指导作用。     

传感器智能芯片与阵列光纤对接平台运动顺序优化

从运动平台空间运动可能存在的720种运动顺序配置入手, 针对智能芯片与阵列光纤对接过程各运动单元产生的几何误差进行敏感性分析, 通过区分和归类各运动单元的敏感误差和不敏感误差, 将运动平台运动顺序配置数减少到90;考虑到运动平台各运动单元具有均匀分散、齐整可比的特性, 运用正交试验设计方法将敏感误差和不敏感误差确定为3个水平, 将6个运动单元确定为6个影响因素, 建立了对应的正交试验表, 得出了5条运动顺序配置的试验路径; 借助MATLAB仿真平台对5条运动顺序配置的试验路径进行了仿真试验, 获得了运动平台运动顺序最优配置; 在封装系统多自由度精密运动平台上进行了实测试验, 检验了仿真试验结果。试验结果表明: 传感器智能芯片与阵列光纤对接的运动平台在空间直角坐标系中最优的运动顺序为先沿横轴平动, 再绕横轴转动, 再绕纵轴转动, 最后沿纵轴平动; 该方法可优化光纤扫描雷达传感器智能芯片与阵列光纤对接的运动平台的空间运动顺序, 还可预测和规划其他多自由度运动平台的配准路径。