现代轿车自动变速器技术分析

自动变速器作为现代汽车传动系统中一个十分重要的总成，对车辆诸多性能的提高起着重要的作用。世界轿车自动变速器技术的发展无疑反映了当今该项技术的潮流，自动变速器技术正朝着结构多挡化、性能高效化、换挡智能化和舒适化等方向发展。     

上海市公交柴油车碳烟排放的评估与分析

介绍了上海市道路交通以及公交汽车拥有量的发展；按照发动机购置年份、机型以及车队等统计上海市公交柴油车碳烟排放状况；追踪某一车队同一机型连续几年来的百公里油耗以及碳烟排放水平，分析了影响公交柴油车碳烟排放的各种因素；最后从管理方面提出加强I／M制度以降低公交柴油车碳烟排放。     

ERP在柴油机柔性装配线上的应用

介绍了自主开发的“ERP”系统,及与之匹配的“取货制”物流配送,解决了在一条柔性装配线上装配650种以上机型混装问题,实现了企业计划、定单、技术准备、财务、质量和制造等的核心业务的网络控制,提高了企业的整体竞争力。     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

轿车覆盖件成型过程动态仿真有限元建模技术研究

研究了轿车覆盖件冲压成型过程动态仿真中的有限元建模问题，比较了可用于覆盖件成型分析的几类单元；讨论了单元的选取和单元划分的若干原则。并结合Santana2000型轿车侧框和NUMISHEET’96的S－Rail标准考题，说明了有限元仿真模型对成型仿真结果的影响。     

设计-施工总承包在武汉阳逻长江大桥南锚碇工程中的应用

介绍武汉阳逻长江公路大桥南锚碇工程采用设计-施工总承包模式的经验,对相关的招标和项目管理工作进行总结.针对我国的实际情况,分析该模式在工程建设中的适用范围.     

水泥、乳化沥青及其用量对水泥-乳化沥青混合料性能的影响

通过对结合料为乳化沥青、水泥乳化沥青以及水泥的混合料进行马歇尔稳定度试验、劈裂强度试验以及抗压强度试验,分析了混合料为这3种结合料的情况下各自的强度增长规律和力学特性,得出了水泥乳化沥青复合结合料具有很强的优越性.     

滑模摊铺机施工水泥混凝土路面经济性分析的探讨

通过对砼滑模摊铺机与人工小型机械施工砼路面的经济性进行比较,计算滑模摊铺机在不同里程施工时的最低台班进度,以及按8 a折旧推算其年生产规模和设备规费的提取额度.     

RC连续弯箱梁桥温度荷载下的位移计算及预防措施

以320国道某实际工程为背景，利用空间有限元软件ANSYS计算由温度变化引起的钢筋混凝土连续弯箱梁桥的不利变形，从设计和构造两方面提出预防温度变化引起的钢筋混凝土连续弯箱梁桥梁体外移的措施。     

区域多机场系统辐射域竞争均衡模型研究

辐射域竞争与协同态势,体现了多机场系统内各机场的竞争力。本文基于Lotka-Volterra模型对区域多机场系统内的交叉腹地进行竞争均衡研究,以机场综合实力为影响因子,选择各机场在交叉腹地的市场份额为因变量,求解两机场间的竞争稳定状态及满足条件。以长三角机场群内南京禄口机场、杭州萧山机场的腹地交叉区域为例,对其进行数值仿真。结果表明,当两机场间的综合实力比值均大于腹地交叉区域旅客对相应机场的需求量时,两机场将实现各自在辐射域交叉部分的竞争均衡。这为机场提升自身在区域多机场系统内的竞争力提供了一种理论分析方法。