柴油机增压器包覆层隔声性能试验分析及优化设计

提出一种船用增压器的包覆层结构,其内层为绝热材料和吸声材料,外层为金属薄片。采用统计能量法(SEA)建立该结构的中高频段隔声数值模型,开展包覆层的隔声试验,隔声量实测值与仿真结果吻合较好,能验证数值建模的有效性。对包覆层的吸声材料的厚度、密度和流阻等参数进行优化设计,利用正交试验法设计数值试验组,采用极差和方差分析法分析影响材料隔声性能的关键因素,得出最重要的影响因素是材料厚度,在选型设计中还应考虑密度和流阻因素。当安装厚度受限时,可通过改变密度和流阻值来提高材料的隔声量。     

区域多机场系统辐射域竞争均衡模型研究

辐射域竞争与协同态势,体现了多机场系统内各机场的竞争力。本文基于Lotka-Volterra模型对区域多机场系统内的交叉腹地进行竞争均衡研究,以机场综合实力为影响因子,选择各机场在交叉腹地的市场份额为因变量,求解两机场间的竞争稳定状态及满足条件。以长三角机场群内南京禄口机场、杭州萧山机场的腹地交叉区域为例,对其进行数值仿真。结果表明,当两机场间的综合实力比值均大于腹地交叉区域旅客对相应机场的需求量时,两机场将实现各自在辐射域交叉部分的竞争均衡。这为机场提升自身在区域多机场系统内的竞争力提供了一种理论分析方法。     

基于人体损伤的低速气囊标定研究

文章应用整车碰撞有限元模型与THUMS人体模型,对该车低速碰进行了气囊匹配分析,分析了该车在25kmph、28kmph、30kmph、32kmph的低速碰撞情况的人体伤害情况,得出了该车在30kmph时,且气囊在35ms起爆时,人体伤害最小的结论。     

乘用车车内噪声与主观评价相关性分析

文章选取了7辆车进行噪声舒适性主客观评价试验,客观评价指标为驾驶员耳边噪声值,主观评价指标为滚动噪声、边棱敏感性等5个,评车师根据试验情况对试验车各指标进行打分并给出总分值。比较了不同试验车速车辆前后排的噪声值,并对主、客观数值进行多元回归分析。     

Gender differences in commuting travel in the U.S.: interactive effects of race/ethnicity and household structure

Transportation - This research investigates the interactive effects of the household structure and race/ethnicity on gender differences in commuting travel in the United States. Existing research...     

Two-dimensional numerical simulation of an elastic wedge water entry by a coupled FDM-FEM method

Hydroelastic behavior of an elastic wedge impacting on calm water surface was investigated. A partitioned approach by coupling finite difference method (FDM) and finite element method (FEM) was developed to analyze the fluid structure interaction (FSI) problem. The FDM, in which the Constraint Interpolation Profile (CIP) method was applied, was used for solving the flow field in a fixed regular Cartesian grid system. Free surface was captured by the Tangent of Hyperbola for Interface Capturing with Slope Weighting (THINC/SW) scheme. The FEM was applied for calculating the structural deformation. A volume weighted method, which was based on the immersed boundary (IB) method, was adopted for coupling the FDM and the FEM together. An elastic wedge water entry problem was calculated by the coupled FDM-FEM method. Also a comparison between the current numerical results and the published results indicate that the coupled FDM-FEM method has reasonably good accuracy in predicting the impact force.     

某型船电网振荡的原因分析及对策

本文分析了某型船电力系统在电网振荡时各电气参数变化的特点及电网发生振荡的原因,阐述了处理电网振荡的方法,提出了一种新的处理方法,并提出了一些建议。     

Modeling traffic operation at signalized intersections without explicit left‐turn yielding rules with an enhanced cell transmission model

This paper presents an enhanced cell transmission model (CTM) to capture traffic operation at signalized intersections without explicit permissive left‐turn yielding rules (i.e. aggressive permissive left‐turn maneuvers may not necessarily yield to opposing through traffic), which can be widely observed in many developing countries. Different from previous studies that focus on traffic dynamics on approaching links, this study contributes to modeling traffic operations within the intersection. A novel cell transmission framework with various types of virtual cells is proposed to model the dynamics of traffic movements from approach to exit. The unique phenomenon of competitive occupying of the conflict point between the left turn and opposing through movements is modeled. The cell state indicating its blockage is proposed to capture the dynamic queue formulation and dissipation and to evaluate the operational traffic performance at the intersection. Field validation results show that the proposed model can capture the operation of traffic at signalized intersections without explicit permissive left‐turn yielding rules with significantly higher level of accuracy than traditional traffic flow models. Copyright © 2016 John Wiley & Sons, Ltd.     

吉隆坡地铁A标段盾构土舱压力的计算与分析

文章以吉隆坡新捷运工程地下北段A标工程为例,基于Horn的三维楔形体破坏理论,采用极限平衡分析法,推导出了在土压及全水头压力作用下满舱土、半舱土、无土三种状态下土舱压力的计算方法,并采用整体分析与局部分析相结合的方法进行了验证。从计算结果可以看出,影响土舱压力的因素主要有水位高度、覆土厚度、粘聚力、覆土及掌子面处的内摩擦角,并对这五个因素进行了敏感性分析。通过运用该方法计算的土舱压力进行掘进并对现场监控量测数据进行分析,地表沉降均满足相关设计要求。