浅水铺管船自动喷水灭火系统设计

就浅水铺管船自动喷淋水灭火系统的工作原理、系统的分区、喷头的布置等作简要介绍;同时对喷淋系统主要设备参数进行计算,为设备选型提供依据。     

舰船电力系统自适应电流保护网络拓扑分析

舰船电力系统自适应电流保护是根据电网的运行方式、网络结构和故障类型等来实时改变保护定值或保护性能,使保护最优化。网络拓扑结构的变化可以通过检测开关、断路器等的开断和闭合情况以及线路电流、电压的变化来确定,它是进行保护分析的基础。本文简单介绍了舰船电力系统保护研究的现状,阐述了引入舰船电力系统自适应电流保护的重要性,并主要论述了如何通过节支关联矩阵来对网络结构变化进行跟踪。     

永磁无刷直流电机霍尔位置传感器的安装

永磁无刷直流电机在各行各业的应用越来越广泛。在永磁无刷直流电机中,霍尔位置传感器经常用来测量电机的转子位置和转速。转子位置传感器的安装精度直接关系到永磁无刷直流电机的运行,因此如何安装传感器是非常重要的。本文结合作者多年从事无刷直流电机开发的经验,提出了简便易行的霍尔位置传感器安装方法。     

舰船综合电力系统设计开发模式研究

针对舰船综合电力系统这样一个复杂的非线性系统,本文分析了传统的系统设计与实施方法中存在的问题和问题引起的原因。文章提出了一种新的基于模型的系统研制开发模式,以数学模型作为系统设计开发中的核心,不断的在各个阶段通过验证对系统的设计进行完善。具体描述了整个开发模式中所包含的具体实施步骤,将基于模型的思想贯穿到系统开发的整个过程。     

盾构施工筹划原则及影响因素分析

以北京地铁4号线11合同段(灵境胡同-新街口)四站三区间的盾构施工筹划为例,重点分析影响盾构施工筹划的因素;以方案比较的方法,介绍了确定三区间总体筹划方案的详细过程.     

Analysis on the Effects of Overloading on the Mechanical Properties of Tunnel Structures in the Silty Ground --A Case Study of Sutong River-crossing GIL Utility Tunnel北大核心CSCD

Based on the Sutong GIL utility tunnel project, which is constructed by the shield machine under the river, and as for the overloading problem at the river bank slope during operating period, the refined threedimensional finite element model was established to study the deformation and cracking characteristics of the tunnel segment structure under different forms of overloading. The evolution laws of section convergence, joint opening and structural stress were analyzed, and the structure damage mechanisms were revealed under conditions of large area loading and local loading. The surface-surcharge control standard was proposed. For the big diameter shield tunneling crossing the silty clay, the research results show that: (1) the deformation failure process is divided into three stages under large area loading condition, taking the design load and compressive yield of rebars inside haunch as the critical points respectively. The first stage is characterized by the elastic stress, the second stage is in plastic state with fracture, and the third stage is accelerating deformation and instability stage. The vertical convergence is 110.5 mm with no opening of joints when rebars are yielded; (2)the deformation failure process under local loading condition is also divided into elasticity, plasticity and instability stages, taking the design load and tensile yield of rebars outside haunch as the critical points respectively. The vertical convergence is 152.6 mm with joint opening of 4.36 mm; (3) the early-warning values of additional stress on the ground under conditions of large area loading and local loading are 110 kPa and 70 kPa respectively. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

溢油回收船电力推进系统功率限制功能设计

变频器功率限制功能是保证电力推进系统安全运行不可或缺的一环,本文针对万吨级溢油回收船电力推进系统,设计了一种新的功率限制算法及相应硬件接口,最后通过实船验证,表明该功能设计满足万吨级溢油回收船电力推进系统安全性要求。     

沉管隧道预制管节顶推滑移系统摩擦试验研究

为了针对某大型沉管隧道预制管节的顶推滑移系统选择合适的摩擦面材料,文章对该顶推滑移系统的四组拟采用摩擦面材料(不锈钢板-PTFE、不锈钢板-NGE、普通钢板-PTFE、普通钢板-NGE)进行了静、动态摩擦系数测试。利用20 000 k N压剪试验机、采用双剪法进行了模拟测试试验。试验结果表明:(1)四组被测试摩擦面的摩擦系数中,不锈钢板与PTFE板的最小,普通钢板与PTFE板的最大;(2)锂基润滑油和水对减小不锈钢板与PTFE板之间的静、动摩擦系数效果都十分明显,但锂基润滑油对摩擦系数的减小效果会随着油层被挤压变薄而逐渐减弱。该试验结果为该顶推滑移系统的摩擦面材料选择以及摩擦面润滑处理措施提供了重要参考依据。     

道路运输行业安全监管现状分析及对策研究

结合道路运输行业安全监管现状,从道路运输行业安全监管职责和内容、监管方式、安全检查方面对道路运输行业安全监管存在的问题进行分析,并有针对性的提出了相应的建议和对策。     

NFM盾构机带压开舱换刀技术

文章以深圳地铁2号线东延线2222标段工程中采用的带压开舱换刀试行方法为依托,针对NFM土压平衡盾构机的设备情况,总结出了相关的技术方案,主要包括开舱前的准备工作和带压开舱换刀作业的整个实施流程及相关技术要点。