地下中庭车站的通风空调设计

以上海城市轨道交通7号线龙阳路站为例,介绍上海第一个地下大中庭车站的通风空调及防排烟设计,从防烟分区的划分、风管布置、系统运行等多方面进行分析,并指出与典型地下车站设计的区别。     

SHT-2000灭火系统及其在地铁工程中的应用

对目前地铁中使用的哈龙(Halon)1301、FM200、烟络尽(Inergen)等气体灭火系统与一种新型气体灭火系统--SHT-2000型进行比较.介绍了SHT-2000型气体灭火系统的技术特点和优良性能.详细说明了气体型灭火检验标准与要求.指出SHT-2000型全淹没灭火系统是当前对Halon 1301的最佳替代品,这是一种适用于地铁工程的新型气体灭火技术.     

DQL2000/1500·35型斗轮机堆取料工艺

介绍了DQL2000/1500·35型斗轮机堆取料工艺,特别是采用回转为主的分层取料方式的合理性。     

收费公路存在的问题与对策

收费公路是特定历史条件下的产物,给人们出行带来了方便。经过十几年的运行,矛盾也随之出现。如何理顺收费公路的管理关系,已到迫切解决的时候了。就此问题进行探讨。     

海水-冰晶两相流非等温流动及传热研究

船舶在冰区航行时,存在冰晶颗粒混合海水流入船舶冷却系统现象。基于颗粒动力学理论,建立适用于海水-冰晶两相流的欧拉-欧拉双流体模型,耦合相间传热传质模型对海水-冰晶两相流在水平直管内流动及传热特性数值模拟。研究表明,冰晶颗粒流动过程中,在管道上部位置R=8~10mm处冰晶体积分数达到最大值,且随着速度增加而增大;当入口含冰率(IPF)为4%时,冰晶速度的最大值出现在管道中心轴线上方。当入口速度为1.0~3.0 m·s-1,含冰率4%~30%时,局部传热系数随入口速度及含冰率增大而增加。     

西安地铁二号线地裂缝段防水设计探讨

地裂缝是西安市地铁工程建设面临的重大难题,其活动将给地铁的防水带来很大的压力.结合西安市地铁二号线地裂缝段处置措施的课题研究,对地裂缝的成因及特点进行了说明;根据地裂缝段地铁的结构设置情况和地裂缝的特点,提出了GINA止水带法、可卸式管片拼装双层结构法和管中管法等三种具体的防水方案.     

支撑式TBM与双护盾式TBM在设计选型中的比较

如何对硬岩隧道(洞)施工中使用的TBM进行设计选型?相信这是每个工程业主和设计院都需要面对的问题.通过对硬岩隧道(洞)掘进中,支撑式和双护盾式TBM的施工方法及设备功能包括对地质的适应性以及初期支护与混凝土衬砌型式、不良地质地段处理方法、出碴运输方式、环境影响等进行比较,并结合辽宁省大伙房输水一期工程输水隧洞施工中TBM的工程实践,提出了弥补支撑式TBM开挖和衬砌不能平行作业的改进构想,提出了采用栈桥式仰拱模板台车和全环内通式模板台车的施工方法.通过改进,可实现一模养生、一模浇注、第三模移动框架梁的作业工序.     

隧道内爆炸作用衬砌结构的动力响应和损伤机理研究

隧道内爆炸作用可能导致其衬砌结构的破坏和坍塌,造成车辆通行受阻和生命财产损失。为了研究隧道衬砌结构的抗爆性能,应用AUTODYN软件建立了隧道衬砌-岩石-土壤的三维数值模型,并考虑炸药-空气-结构的流固耦合相互作用,以及隧道内爆炸作用对衬砌结构的动力响应和损伤机理进行了数值模拟分析。结果表明:在不同炸药量作用下,超压峰值及冲量以爆心地面投影点为中心,向四周迅速衰减,表现出一定的规律性;离爆心最近的底板首先出现损伤,并向四周扩展,直墙角部由于受到底板竖向变形而引起的拉应力作用,较早地出现损伤,在直墙壁和拱顶产生纵向和环向的裂缝,这些裂缝把整体式隧道衬砌结构分割成大小不等的混凝土块体。     

Numerical Simulation of Float-Over Installation for Offshore Platform

In this paper, a numerical investigation of a float-over installation for an offshore platform is presented to verify the feasibility of the actual installation. The hydrodynamic performance of a T-barge is investigated in the frequency domain, and the coupled motions are analyzed in the time domain. We then compare with those of the model test and determine that the response amplitude operator and the time series agree quite well. The barge exhibits favorable hydrodynamic behavior in the considered sea state, and the equipment loads are allowable. The mooring system and sway fender forces are within the permissible range. Based on these results, we can verify that the actual installation of the offshore platform is feasible. We accurately simulated many important factors and effectively reduced the risk associated with the offshore installation, which is of great importance. As such, we demonstrate that the numerical simulation of the float-over installation for offshore platforms has practical engineering significance.     

Analysis on the Effects of Overloading on the Mechanical Properties of Tunnel Structures in the Silty Ground --A Case Study of Sutong River-crossing GIL Utility Tunnel北大核心CSCD

Based on the Sutong GIL utility tunnel project, which is constructed by the shield machine under the river, and as for the overloading problem at the river bank slope during operating period, the refined threedimensional finite element model was established to study the deformation and cracking characteristics of the tunnel segment structure under different forms of overloading. The evolution laws of section convergence, joint opening and structural stress were analyzed, and the structure damage mechanisms were revealed under conditions of large area loading and local loading. The surface-surcharge control standard was proposed. For the big diameter shield tunneling crossing the silty clay, the research results show that: (1) the deformation failure process is divided into three stages under large area loading condition, taking the design load and compressive yield of rebars inside haunch as the critical points respectively. The first stage is characterized by the elastic stress, the second stage is in plastic state with fracture, and the third stage is accelerating deformation and instability stage. The vertical convergence is 110.5 mm with no opening of joints when rebars are yielded; (2)the deformation failure process under local loading condition is also divided into elasticity, plasticity and instability stages, taking the design load and tensile yield of rebars outside haunch as the critical points respectively. The vertical convergence is 152.6 mm with joint opening of 4.36 mm; (3) the early-warning values of additional stress on the ground under conditions of large area loading and local loading are 110 kPa and 70 kPa respectively. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.