Adapting the light · biomass (BZI) models of phytoplankton primary production to shallow marine ecosystems

Several authors have reported a strong linear relationship between daily phytoplankton production and the product of chlorophyll biomass, photic depth, and incident irradiance for a variety of estuaries. This “light · biomass” (BZ_pI_o) formulation has been proposed as an alternative to traditional mechanistic approaches for computing phytoplankton production in numerical estuarine models. One limitation to their application in shallow systems is that the BZ_pI_o models have been developed in relatively deep estuaries where light does not reach the bottom. We propose a nonlinear correction factor to adapt the BZ_pI_o relationship to shallow systems where light does reach the bottom. Our function takes into account variations in incident irradiance, attenuation coefficient for light, photosynthetic efficiency, and maximum rate of photosynthesis. A series of correction polynomials are proposed for various ranges of incident irradiance, and are integrated into a single multiple polynomial which applies across all irradiance levels. Our new correction factor was tested against a ¹⁴C-based productivity dataset from shallow stations in Narragansett Bay, RI and an O₂-based dataset from shallow (1.1 m) lagoon mesocosms at the University of Rhode Island. Results showed that our polynomials accurately correct BZ_pI_o-predicted rates of production in shallow water columns. Application of our correction factor to a series of shallow water productivity datasets from the literature together with theoretical calculations show how significant the shallow water correction can be, especially in very shallow water columns with low turbidity.     

Biologically induced differences in erodibility and aggregation of subtidal and intertidal sediments: a possible cause for seasonal changes in sediment deposition

This study was carried out to describe the difference in erodibility and aggregation in a tidal basin including both subtidal and intertidal study sites and to use these results to explain the shifting erosion/deposition cycles at the sites. Erosion thresholds, erosion rates and settling velocities of the eroded material were measured at a mudflat transect and at sediment cores taken from a nearby tidal channel during surveys made in May 2000 and March 2002. Surface samples were analysed for grain-size, chl. a content, faecal pellet content, dry bulk density and organic content. Additionally, surface samples were taken at eight occasions in the period January 2002 to May 2003 from shallow tidal channels in the area. These samples were analysed for mud content and showed that major shifts in sediment distribution occurred in the period. The erodibility of the mudflat was generally high due to pelletization by the mudsnail Hydrobia ulvae but close to the salt marsh much lower erodibility was found, probably due to stabilisation by microphytobenthos. In contrast, the erodibility of the channel bed seemed to be very little influenced by biological activity and the relatively low erodibility found here was caused by physical characteristics of the sediment. The sediment eroded from the mudflat was generally strongly pelletized and showed high settling velocities whereas less aggregation and lower settling velocities were found for the channel bed sediments. Temporal variations of the mudflat stability and hydrodynamics resulted in temporal variations of deposition and erosion and the changing stability at the mudflat is likely to be one of the main reasons for a general transport of fine-grained sediment from the mudflat to the channel in the cold seasons and vice versa during the rest of the year.     

Some unsettling maritime terms: the interpretation of found, cargo, ballast and voyage

This paper examines the meaning of four common maritime and admiralty terms: found, cargo, ballast and voyage . These terms are problematic because their definitions are elastic which makes application of the terms difficult. The four terms are important because significant legal consequences are attached to each of them, particularly for seamen on flags of convenience (FOC) and crews of convenience (COC) vessels in US ports. The findings of the author are based on personal experience as well as research conducted in preparation as an expert witness in several maritime cases in both the US District Courts and in Louisiana State Courts, personal interviews with seamen on FOC/COC vessels, interviews with legal and economic experts on the international maritime industry and officials of national and international labour organizations.     

Railway Wheel and Automotive Tyre

In the present paper the theories of the railway wheel and the automotive tyre are discussed. After an introduction the paper opens with a discussion of the common ground, viz. the rolling motion of deformable bodies. Then the railway wheel is discussed, and it is shown that all aspects may be calculated numerically from the material constants Poisson's ratio, Young's modulus, and the coefficient of friction, and from the geometry of wheel and rail. Next the automotive wheel is considered. Such a wheel is very anisotropic, to the extent that the theory of the lateral motion (out-of-plane dynamics) is radically different from the longitudinal, or in-plane motion. Moreover, the analysis of the automotive wheel heavily relies on experiments. In the conclusion, the theories are compared.     

Topological analysis of powertrains for refuse-collecting vehicles based on real routes–Part I: Hybrid hydraulic powertrain

In this two-part paper, a topological analysis of powertrains for refuse-collecting vehicles (RCVs) based on the simulation of different architectures (internal combustion engine, hybrid electric, and hybrid hydraulic) on real routes is proposed. In this first part, a characterization of a standard route is performed, analyzing the average power consumption and the most frequent working points of an internal combustion engine (ICE) in real routes. This information is used to define alternative powertrain architectures. A hybrid hydraulic powertrain architecture is proposed and modelled. The proposed powertrain model is executed using two different control algorithms, with and without predictive strategies, with data obtained from real routes. A calculation engine (an algorithm which runs the vehicle models on real routes), is presented and used for simulations. This calculation engine has been specifically designed to analyze if the different alternative powertrain delivers the same performance of the original ICE. Finally, the overall performance of the different architectures and control strategies are summarized into a fuel and energy consumption table, which will be used in the second part of this paper to compare with the different architectures based on hybrid electric powertrain. The overall performance of the different architectures indicates that the use of a hybrid hydraulic powertrain with simple control laws can reduce the fuel consumption up to a 14 %.     

Optimal scheduling of the flexray static segment based on two-dimensional bin-packing algorithm

FlexRay is a reliable and hard real-time in-vehicle communication protocol that is strongly promoted by car manufacturers as the de facto standard in the automotive domain. The protocol offers both a time-triggered and an eventtriggered architecture. This paper focuses on the optimal scheduling of the time-triggered component of FlexRay known as the static (ST) segment using a two-dimensional bin-packing technique. To maximize the bandwidth utilization in the ST segment, a fast heuristic as well as an efficient integer linear programming approach are proposed. Our methods directly schedule signals into slots including frame packing, according to signal-based data scheduling and the slot/ cycle multiplexing mechanisms presented by the latest version of the FlexRay protocol. The benefits of our proposed methods are demonstrated by extensive experiments on synthetic and an automotive X-by-wire system case study. An additional test case is examined to emphasize the superior performance of the proposed approach relative to that of existing optimal scheduling approaches.     

A Comparison of Various Computer Simulation Models for Predicting the Directional Responses of Articulated Vehicles

This paper presents the results of a comparative study of the predictions, made using computer simulation models of different levels of complexity, of the directional responses of commercial articulated vehicles in steady-state and lane-change maneuvers. The differences in the predictions obtained using various models are examined and are compared with available experimental data. The objective of this study is to compare the capabilities and limitations of various simulation models for predicting the directional behavior of articulated vehicles.     

Management of coastal eutrophication: Integration of field data, ecosystem-scale simulations and screening models

A hybrid approach for eutrophication assessment in estuarine and coastal ecosystems is presented. The ASSETS screening model (http://www.eutro.org) classifies eutrophication status into five classes: High (better), Good, Moderate, Poor and Bad (worse). This model was applied to a dataset from a shallow coastal barrier island system in southwest Europe (Ria Formosa), with a resulting score of Good. A detailed dynamic model was developed for this ecosystem, and the outputs were used to drive the screening model. Four scenarios were run on the research model: pristine, standard (simulates present loading), half and double the current nutrient loading. The Ria Formosa has a short water residence time and eutrophication symptoms are not apparent in the water column. However, benthic symptoms are expressed as excessive macroalgal growth and strong dissolved oxygen fluctuations in the tide pools. The standard simulation results showed an ASSETS grade identical to the field data application. The application of the screening model to the other scenario outputs showed the responsiveness of ASSETS to changes in pressure, state and response, scoring a grade of High under pristine conditions, Good for half the standard scenario and Moderate for double the present loadings. The use of this hybrid approach allows managers to test the outcome of measures against a set of well-defined metrics for the evaluation of state. It additionally provides a way of testing and improving the pressure component of ASSETS. Sensitivity analysis revealed that sub-sampling the output of the research model at a monthly scale, typical for the acquisition of field data, may significantly affect the outcome of the screening model, by overlooking extreme events such as occasional night-time anoxia in tide pools.