沥青混合料搅拌设备导热油加热器PLC控制系统

阐述了沥青混合料搅拌设备导热油加热器工作原理和特点，介绍了ＰＬＣ在导热油加热器控制中的应用，分析了控制系统中程序设计的关键。     

基于实测数据评估交通事件检测中神经网络应用性的研究

神经网络为交通事件自动检测技术摆脱传统方法探测率低、误报率高的状况提供了新的解决思路。在以往局限于仿真数据研究的基础上,本文利用I-880数据库实测交通事件数据对神经网络在交通事件自动检测中的实际应用进行了研究,结果表明:神经网络应用于交通事件自动检测技术中,具有较高的探测率和较低的误报率,但该算法可移植性较差,在实际应用中要予以考虑。     

车务可视化信息系统设计与实现

车务可视化信息系统通过三维模型及虚拟漫游的展现形式,将铁路运行及运营的动态信息进行集成和柔性展示,实现旅客服务信息及运输管理相关数据的整合,通过可视化的展现方式既方便旅客及管理人员,又充分展示铁路信息化建设的成果。     

基于Ansys的矩形加筋平盖封头强度评定

将有限元方法与分析设计相结合,利用有限元分析软件Ansys对一种矩形加筋平盖封头进行强度评定。本文首先介绍瓶盖封头结构的改进。然后建立有限元模型,并进行应力求解。结果表明,此加筋平盖封头满足强度要求,与普通平盖封头相比,减小了平盖的厚度,降低了结构总重量,对平盖封头的结构改进设计具有一定指导作用。     

The identification and empirical characterization of vehicular (Lagrangian) fundamental diagrams in multilane traffic flow

Traditional macroscopic traffic flow modeling framework adopts the spatial–temporal coordinate system to analyze traffic flow dynamics. With such modeling and analysis paradigm, complications arise for traffic flow data collected from mobile sensors such as probe vehicles equipped with mobile phones, Bluetooth, and Global Positioning System devices. The vehicle‐based measurement technologies call for new modeling thoughts that address the unique features of moving measurements and explore their full potential. In this paper, we look into the concept of vehicular fundamental diagram (VFD) and discuss its engineering implications. VFD corresponds to a conventional fundamental diagram (FD) in the kinematic wave (KW) theory that adopts space–time coordinates. Similar to the regular FD in the KW theory, VFD encapsulates all traffic flow dynamics. In this paper, to demonstrate the full potential of VFD in interpreting multilane traffic flow dynamics, we generalize the classical Edie's formula and propose a direct approach of reconstructing VFD from traffic measurements in the vehicular coordinates. A smoothing algorithm is proposed to effectively reduce the nonphysical fluctuation of traffic states calculated from multilane vehicle trajectories. As an example, we apply the proposed methodology to explore the next‐generation simulation datasets and identify the existence and forms of shock waves in different coordinate systems. Our findings provide empirical justifications and further insight for the Lagrangian traffic flow theory and models when applied in practice. Copyright © 2015 John Wiley & Sons, Ltd.     

重载货车摩擦缓冲器阻抗特性的数值模拟

为预测摩擦缓冲器的实际工作状态,从几何特征和作用原理的角度,建立详细的MT-2型缓冲器理论模型。首先,通过对缓冲器内部各摩擦元件的运动学和静力学分析,推导出缓冲器在准静态下的阻抗特性;其次,引入附加摩擦系数量化各摩擦元件之间动静态摩擦过渡时的黏滞补偿,并模拟出缓冲器在动态下的阻抗特性;最后,利用C80型货车冲击试验数据对该缓冲器的理论模型进行验证。验证结果表明:总体上,数值模拟和现场试验下的缓冲器示功曲线基本吻合,说明模型的正确性;局部上数值模拟中缓冲器从加载Ⅰ阶段过渡至加载Ⅱ阶段的突变现象在冲击试验中表现的并不明显,还有待进一步完善。     

A signal-based fault detection and classification method for heavy haul wagons

This paper proposes a signal-based fault detection and isolation (FDI) system for heavy haul wagons considering the special requirements of low cost and robustness. The sensor network of the proposed system consists of just two accelerometers mounted on the front left and rear right of the carbody. Seven fault indicators (FIs) are proposed based on the cross-correlation analyses of the sensor-collected acceleration signals. Bolster spring fault conditions are focused on in this paper, including two different levels (small faults and moderate faults) and two locations (faults in the left and right bolster springs of the first bogie). A fully detailed dynamic model of a typical 40t axle load heavy haul wagon is developed to evaluate the deterioration of dynamic behaviour under proposed fault conditions and demonstrate the detectability of the proposed FDI method. Even though the fault conditions considered in this paper did not deteriorate the wagon dynamic behaviour dramatically, the proposed FIs show great sensitivity to the bolster spring faults. The most effective and efficient FIs are chosen for fault detection and classification. Analysis results indicate that it is possible to detect changes in bolster stiffness of ±25% and identify the fault location.     

VEGF-C、VEGFR-3和podoplanin在食管癌中的表达及其意义

目的观察血管内皮生长因子C(VEGF-C)及其受体3(VEGFR-3)和肾小球上皮细胞整合膜蛋白(podoplanin)在食管癌组织中的表达,分析其与肿瘤淋巴结转移的关系。方法免疫组织化学SP法检测76例食管癌组织中VEGF-C、VEGFR-3和podoplanin的表达及淋巴管密度(LVD)。结果食管癌VEGF-C表达阳性率为63.1%,VEGF-C的表达与食管癌的淋巴结转移、TNM分期有统计学意义(P<0.01,P<0.05),但与患者年龄、肿瘤大小及分化程度无关;癌旁组织淋巴管密度同淋巴结转移、VEGF-C阳性表达间有统计学意义(P<0.01,P<0.05),podo-planin LVD值与VEGFR-3 LVD值相比,具有统计学意义(P<0.01)。结论食管癌组织中VEGF-C表达与肿瘤TNM分期、淋巴管密度和淋巴结转移有关,VEGF-C表达越高,淋巴管密度越大,淋巴结转移可能性越高。癌旁组织LVD同VEGF-C的高表达及淋巴结转移密切相关,食管癌组织中podoplanin标记的淋巴管密度较VEGFR-3标记的淋巴管密度更为精确,是一种更为满意的淋巴管内皮特异性标志物。     

纵流艏船舶测深仪使用效能研究

长江航道系统的航标船大多采用纵流艏船型,由于其型线的特殊性,使得装在船底的测深仪,在航速大于5km/h时,即不能正常工作显示水深。本课题主要从流体力学、测深原理和船体结构等诸方面进行研究,研制了特殊的组合机构,解决了上述问题,使得测深仪在各种工况下均能准确测量航道,对同类船的改造提供了指导和依据。     

归心改正理论在舰船真航向动态测量中的应用

采用计算方位和测量舷角相结合的方法进行真航向测量时,由于舰船安装条件有限,舰位测量设备DGPS和经纬仪不可能安装在同一位置。直接将DGPS测量的舰位作为经纬仪中心的位置会影响到方位角的计算结果,进而影响航向测量精度。本文采用归心改正理论根据DGPS测量的舰位推算经纬仪中心的精确位置,根据此位置计算出的岸标真方位的精度得到了提高,最终提高航向测量的精度。