Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Structural Optimization and Strength Analysis of the Lifting Arm of a Wet Shotcrete Spraying Unit北大核心CSCD

Wet shotcrete spraying units are widely used in underground engineering, for railways, highways, water conservancy and hydropower stations, municipal works, mining and military and other industries. Structural analysis and mechanical behavior optimization are conducted regarding the lifting arm of a TKJ series shotcrete spraying unit, and optimization of the hinge point position and working scope of the lifting arm is realized. The optimal layout scheme for the hinge force is given based on the Monte Carlo method, the hinge force of the lifting arm is improved for the mean and maximum values, and the maximum and average hinge force of the lifting cylinder decrease by 23.14% and 7.70%, respectively, compared with that of the original scheme. The static strength is checked using Ansys-Workbench for the optimized scheme, and the results show that the optimized scheme has a larger safety re-serve and that the structural design is more reasonable than the original scheme. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Shaping the Coast with Permits: Making the State Regulatory Permitting Process Transparent with Text Mining

This paper examines the California Coastal Commission's permitting process. Using several text mining techniques, including web scraping, information extraction, and supervised classification, I demonstrate how to retrieve empirical data from unstructured texts, namely public meeting agendas and staff reports. Contrary to the concern that the Commission routinely delays or rejects permitting requests, the data reveal that outright rejection of permit applications is rare. On average, eight of ten applications were approved. Single-family homes and commercial development projects were approved about 80% of the time; the rates were about 70% for seawalls and retaining walls, and 60% for land-use changes. Most applications were processed swiftly, with a median application length of 3 months. The agency's influence comes primarily from negotiating each application. Qualitative study of 50 cases pertaining to single-family home construction reveals that the agency adopts a “managed development” approach, that is, allowing development but scrupulously managing various aspects of development. These case studies illustrate how the agency interprets the broad, abstract state laws and translates the mandates into enforceable actions as permitting conditions. In areas where the state mandates conflict, particularly over development in receding shorelines, the agency has the largest leverage in creating and implementing its preferred policies. The text mining techniques demonstrated in this paper can be applied to study any governmental agency. These techniques help to extract information from a massive volume of papers and organize them into a database for analyses. The empirical data extracted from texts can significantly increase bureaucratic transparency.     

叙泸段河道非恒定流作用下水力参数的变化

金沙江与岷江干支流上水电站调峰发电下泄非恒定流引起下游叙泸段河道水流条件显著变化。结合一维非恒定流数学模型和实测资料分析研究叙泸段河道内代表性非恒定流传播过程及其造成水力参数相对于概化恒定流条件时的变化情况。结果表明:叙泸段河道内典型非恒定流波长为218 km,传播速度3 m/s;随着传播距离增加波衰减幅度减小,波形变得光滑;当宜宾水位处于波峰时,下游沿程流量呈现递减趋势,波谷则正好相反;相对于恒定流条件,其流量变化范围为0~730 m3/s,水位抬升0.5~2 m;断面平均流速变化在-0.5~0.2 m/s,比降变化范围为-0.2‰~0.2‰,比降最大值为1.38‰。     

金沙江宜宾段非恒定流过程及传播特性

金沙江、岷江的非恒定流调节过程较为复杂,在宜宾汇合后形成新的非恒定流向下游传播。通过近年实测资料,分析金沙江、岷江非恒定流特征及汇合效果。结果表明:宜宾段非恒定流特征与向家坝电站下泄非恒定流的符合度更高,岷江的非恒定流无典型过程;宜宾段水位变幅和金沙江、岷江水位变幅存在线性关系;涨幅在1.7 m左右,起调水位在1 m左右的泄水波可作为宜宾段非恒定流过程的典型代表,其在下游的传播速度沿程基本保持一致,衰减幅度随着距离的增加而减小。     

锌氧化银电池注液激活系统仿真模拟

利用ANSYS Fluent软件对锌氧化银一次电池注液激活系统进行模拟分析,在三种不同特性的点火器匹配注液激活系统条件下,模拟计算各个阀门能否正常开启、开启时间以及开启的顺序。分析计算得出各个阀门开启的时间,能够很好的指导注液系统设计。     

航天管路系统波纹补偿器的设计及试验研究

航天管路系统中需要应用波纹补偿器进行软连接,波纹补偿器承受着温度、压力及位移补偿等载荷,需要对补偿器的设计及试验方法进行深入研究。文中对航天管路系统用DN30波纹补偿器进行工程设计和数值模拟分析,研究它的极限承压能力和疲劳寿命,并将结果同试验数据对比,以验证其设计精度。结果表明,有限元法的计算精度优于工程设计方法。在产品设计过程中,把有限元仿真分析、工程设计和试验有机结合在一起,能够显著提高设计精度和产品可靠性。     

“工厂法”沉管隧道早期性能的足尺试验研究

由于沉管隧道管段体积大、结构形式复杂、施工工艺复杂,容易因温度、收缩以及约束等原因,造成管段结构在预制阶段出现危害性裂缝,进而影响结构的服役性能和耐久性能。文章依托在建港珠澳大桥沉管隧道工程实例,开展了足尺试验,对"工厂法"沉管管节关键部位的温度和应变发展实施了监测,分析对比了温度发展规律和应变发展规律。分析结果表明:在早期因混凝土水化热引起温度上升,整个管段结构膨胀受拉,温度到达峰值后逐渐下降,结构也收缩恢复;但由于混凝土自收缩等因素的存在,结构最终收缩受压。研究所提供的试验结果可作为深入进行数值分析的一个基础。     

公路隧道双洞互补式通风适用性分析

为研究公路隧道双洞互补式通风的适用性,文章基于隧址海拔和温度、隧道长度和纵坡、隧道交通量和交通组成、隧道双洞间距等因素对互补式通风负荷比及通风效果的影响进行计算分析。研究结果表明:当隧道上下行通风负荷比大于1.5或隧道单向纵坡绝对值在1.5%~2.0%之间时,适宜采用互补式通风;隧道长度在4.5~6 km之间时,采用双洞互补式通风最经济实用;交通量和交通组成的影响关系显示隧道大型车混入率在35%~50%之间时宜考虑采用互补式通风;双洞隧道适合采用互补式通风的最小间距为30 m。