基于串联排队网络的三峡-葛洲坝水利枢纽联合调度模型

为了提高三峡-葛洲坝水利枢纽的整体通过能力,分析了三峡-葛洲坝水利枢纽联合调度的实际需求,建立了三峡-葛洲坝水利枢纽联合调度数学模型,考虑了闸室面积利用率最大、整体待闸时间最小两个目标函数和船舶编排过程中的八个约束,应用串联排队网络理论求解模型。算法将申报船舶按照航向分成四个船舶序列,动态计算每艘船舶的权重,兼顾船舶长度与宽度优先,待闸时间约束、葛洲坝船闸通航条件限制和任务均衡的要求,循环排船,逐步优化。应用结果表明应用该数学模型和编排算法编制一个计划期的两坝五闸计划仅需2 min,编排时间短,葛洲坝2#船闸的闸室面积利用率高于70%,并且客船和旅游观光船均排在前面的闸次中,说明客船的待闸时间约束是满足的,并且在航向上是上下航向交替运行,没有出现倒闸情况,编制的计划满足实际调度需要。     

随机风浪下的游艇稳性可靠度计算

建立游艇横摇运动微分方程,利用马尔科夫过程理论和路径积分法进行求解,得到游艇横摇角概率密度函数。借鉴结构可靠性计算方法建立游艇稳性概率计算模型,采用当量正态化法(JC法)求解得到游艇稳性可靠度。实例计算表明:游艇在不同海域下的稳性可靠度存在一定差异,随着外界风浪增大,游艇稳性可靠度呈逐步下降趋势,且都存在一个快速下降的波高区间。该方法能够更科学地评判游艇在不同航行条件下的稳性状况,是游艇稳性横准研究的发展方向之一。     

考虑螺旋桨体积力的水下机器人水动力特性仿真

为在初步设计时预测ROV的水动力性能,使用CFD技术进行分析,以ROV模型为例,最大程度地保留ROV内部的构件,使模型更加接近真实状况。分别计算ROV在不同工况下的阻力、不同漂角下的横向力和转艏力矩以及添加体积力模型之后的螺旋桨流场状况,很好地模拟出ROV周围的流场,并与已有的试验数据进行对比。结果验证了CFD水动力仿真的可行性和准确性,并还可预测ROV在螺旋桨作用下的进速等,对ROV设计具有实际的参考价值和指导意义。     

37500m3乙烷运输船液货舱的载荷传递

本文针对为应对美国页岩气革命而研发的37,500m3全球最大型乙烷运输船,就超长的C型独立液货舱的静态载荷如何传递到船体结构,进行了深入地分析研究,设计了不同的载荷分布方式和相应的装载工况,并通过有限元方法进行了分析验证,得出了一些实用的结论,对今后采用C型独立液货舱的液化气船的设计提供了重要参考。     

大型船舶辅机尾气排放测试系统研究

船舶在岸时电力供应主要来源于船舶辅机,因此在岸船舶尾气排放来自于船舶辅机,目前船舶排放相关研究多集中于船舶排放清单,对船舶实际航行中实际排放测试研究较少,船舶辅机实际排放也没有引起重视。该文通过对测试仪器的选型以及测试系统的搭建,构建出一套检测大型船舶辅机尾气排放的PEMS( 车载排放测试系统);在实际船舶辅机排放测试中测得某在岸船舶在300kw和600kw两个工况下NOX,CO,CO2以及颗粒物的排放特性,并对测试工况对排放特征的影响进行了分析。     

直升机舰上起降安全的影响因素研究

舰载直升机的起降安全涉及到舰机两方面,且影响因素较多。本文首先对舰载直升机起降安全因素进行了系统分析,梳理了其关键影响因素舰船空气流场中各特性参数对直升机操作性能的影响。然后介绍了用于舰船空气流场测量的三种典型方法,对舰船空气流场的深入研究有重要指导意义,并可为机舰动态配合研究提供参考。     

Incorporating the extended theory of planned behavior in a school travel mode choice model: a case study of Shaoxing,China

Travel to and from school can have social, economic, and environmental implications for students and their parents. Therefore, understanding school travel mode choice behavior is essential to find policy-oriented approaches to optimizing school travel mode share. Recent research suggests that psychological factors of parents play a significant role in school travel mode choice behavior and the Multiple Indicators and Multiple Causes (MIMIC) model has been used to test the effect of psychological constructs on mode choice behavior. However, little research has used a systematic framework of behavioral theory to organize these psychological factors and investigate their internal relationships. This paper proposes an extended theory of planned behavior (ETPB) to delve into the psychological factors caused by the effects of adults’ cognition and behavioral habits and explores the factors’ relationship paradigm. A theoretical framework of travel mode choice behavior for students in China is constructed. We established the MIMIC model that accommodates latent variables from ETPB. We found that not all the psychological latent variables have significant effects on school travel mode choice behavior, but habit can play an essential role. The results provide theoretical support for demand policies for school travel.     

Model Test on Grouting Law in Dynamic Water-Rich Sand Layers by the Electric Resistance Method北大核心CSCD

In order to study the diffusion law of grouting slurry in the water-rich sand layer under flowing water conditions, a grouting test model consisting of a main test system, a grouting system, and a measurement system was developed. And for detecting the diffusion scope of the grouts, a new resistivity method was proposed. It is found that the relationship between grouting pressure and grouting rate during the test is strong. Under hydrodynamic conditions, the grouting slurry diffuses elliptically. Due to gravity and the effect of the upper water flow, the center of gravity of the ellipsoid is below the grouting outlet, and the grouting effectively improves the physical and mechanical properties of water-rich sand bodies. At the same time, the resistivity method has a good application effect on the detection of grouting diffusion range. The range of slurry diffusion obtained by the resistivity method is basically consistent with the boundary of the stone body after excavation, indicating that the resistivity method is reliable for detection of grouting range in dynamic water-rich sand layer. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.