基于大规模定制的旅游业顾客保留模型研究

在对大规模定制理论、顾客保留理论进行文献综述的基础上,分析了基于大规模定制的旅游业顾客保留的内涵及影响因素,包括个性化体验质量、定制服务质量、定制价格水平、转移障碍等,构建了基于大规模定制的旅游业顾客保留模型,设计了共18个测量变量,并以中国国旅(武汉)国际旅行社有限公司为实证对象,对构建的理论模型进行了实证研究.     

Timing sequence changes of landscape plants in Shanghai Area,China

Based on published reports and direct observation, the common resources of landscape plant species in the Shanghai area were identified and studied in terms of the landscape characteristics of timing sequence changes over a one year time period. The results showed that there were 199 common landscape plant species in Shanghai, distributed in 67 families and 129 genera. These plants were categorized by three ornamental characteristics: flowers, foliage and fruits. The species were thus further analyzed according to the time periods which these characteristics were present. The results showed that flower ornamental distributed throughout the year, particularly from April to June, and plant species with colorful foliage could be seen every month, and particularly in November and December. On the other hand, few plant species with fruit ornamentals were observed in Shanghai area. The diversity of landscape timing sequence changes of the 199 plant species under examination was then analyzed by using the Shannon-Weiner and Simpson index formulas. The results showed that the higher diversity was observed in January, February and from August to October, while the lowest diversity was recorded from March to July and during November and December. The diversity of landscape characteristics of these plants was ranked according to foliage, flowers and fruit. Using this method, one park and one plant community were selected to evaluate the advantages and disadvantages of their time-changing plant landscape, with the goal of assessing the validity of the chosen ranking method. These results in the present study would be helpful to evaluate the plant landscape in a specified space and further enrich the diversity of plant and landscape by a target-oriented way.     

冷再生基层路面结构力学响应分析

针对佛山官西线冷再生路面结构形式,采用有限元BISAR计算软件进行路面力学分析,得到了路面不同深处的位移、应力、应变、剪应力和剪应变.力学分析表明,路面的位移在车轮通过的轮胎正中之轮胎外侧边缘最大,而双轮正中位置的垂直形变最小;竖向应变数值大于水平应变,且3个方向的应变均在路面深度约6 cm处达到最大值;随着路面深度的增加,各计算线的应力趋向一致;最大剪应力和剪应变出现均出现在计算线C的位置处.     

未知负载和转子电阻的交流感应电机自适应控制

基于自适应观测控制器设计了三相交流感应电机调速系统,该控制器在未知电机转子电阻和负载及不需要测量磁链情况下,可同时且不受限制地单独控制电机转速(转矩)和磁链.控制器只测量转速、电压和电流信号自适应估计磁链和未知参数.用该控制方法设计了两相坐标轴磁场定向电机模型,系统不存在非线性,因此适合离散化和DSP系统的数字实现.     

急性脑梗死患者血C反应蛋白水平与颈动脉粥样硬化的关系

目的探讨急性脑梗死患者血C反应蛋白(CRP)水平与颈动脉粥样硬化的关系。方法对52例急性脑梗死患者和30例对照组进行观察。采用速率散射比浊法测定血CRP含量;应用美国Acuson Sequoia 521彩色电脑声像仪检测颈动脉内膜-中膜厚度(IMT),观察颈动脉粥样斑块。结果急性脑梗死患者血CRP含量、颈动脉IMT和粥样斑块数较对照组明显增加;血CRP水平与临床神经功能缺损评分、吸烟指数、颈动脉IMT及斑块数呈正相关。结论CRP作为炎性指标可能在促进动脉粥样硬化的发生和发展中起了重要的作用;血CRP水平可作为急性脑梗死患者病情轻重和预后的评价指标。     

Numerical modeling of ground response during diaphragm wall construction

Construction of diaphragm wall panels may cause considerable stress changes in heavily overconsolidated soil deposits and can induce substantial ground movement. The 3D Lagrangian method was adopted to model the mechanical response of ground, including horizontal normal stress and shear stress, lateral ground displacement and vertical ground surface settlement, during the slurry trenching and concreting of diaphragm wall panels. Numerical results show that slurry trenching leads to horizontal stress relief of ground, reducing the horizontal stress of the ground from initial K0 pressure to hydrostatic betonite pressure. Wet concrete pressure lies between the hydrostatic bentonite pressure and the initial K0 pressure, so it can compensate partially the horizontal stress loss of the ground adjacent to the trench and thus reduce the lateral movement of the trench face as well as the vertical settlement of the ground surface.     

Numerical Simulation of Float-Over Installation for Offshore Platform

In this paper, a numerical investigation of a float-over installation for an offshore platform is presented to verify the feasibility of the actual installation. The hydrodynamic performance of a T-barge is investigated in the frequency domain, and the coupled motions are analyzed in the time domain. We then compare with those of the model test and determine that the response amplitude operator and the time series agree quite well. The barge exhibits favorable hydrodynamic behavior in the considered sea state, and the equipment loads are allowable. The mooring system and sway fender forces are within the permissible range. Based on these results, we can verify that the actual installation of the offshore platform is feasible. We accurately simulated many important factors and effectively reduced the risk associated with the offshore installation, which is of great importance. As such, we demonstrate that the numerical simulation of the float-over installation for offshore platforms has practical engineering significance.     

Spectral Wave Modeling in Very Shallow Water at Southern Coast of Caspian Sea

This study evaluates the capability of the Simulating WAves Nearshore (SWAN) wave model (version 41.01) in predicting significant wave height and spectral peak energy content for swell waves in very shallow water of surf zone during depth-induced wave breaking and dissipation. The model results were compared with field measurements at five nearshore stations. The results demonstrated that some breaker index formulations were successful for significant wave height prediction in surf zones. However, an incorrect shape of the energy spectrum and overestimated near spectral peak energy content at shallow water stations were obtained using all of the embedded depth-induced wave breaking formulations in SWAN. The dependent breaker index on relative depth (K_pd) formulation, which was successful in predicting near spectral peak energy content, resulted in an average error of 30%. Finally, this formulation was modified to enhance the model performance in reproducing the spectral peak energy content.     

CFD Analysis of Ship-to-Ship Hydrodynamic Interaction

A numerical study of ship-to-ship interaction forces is performed using a commercial CFD code, and the results are compared with experimental data and with the results of a panel method analysis. Two ship models have been used in the interaction forces analysis: a tug and a tanker, advancing parallel to each other with different lateral distances and two different values of the fluid depth. Computations are carried out with four different flow models: inviscid and viscous flow with the free surface modeled as a rigid wall and inviscid and viscous flow with the deformable free surface. A fair agreement was obtained with available experimental data and results obtained by panel method. The influence of viscosity in the computations is found to be comparatively weak, while the wavemaking effects may be important, at small magnitude of the horizontal clearance.