Micro-Grinding Performance of Hard-Brittle Chip Materials in Precision Micro-Grinding Microgroove

The micro-structure on hard-brittle chip materials (HBCMs) surface can produce predominant functions and features. The micro-grinding with diamond wheel micro-tip is an efficient method to machine microstructure on HBCMs. However, different HBCMs and crystal orientation may have a significant influence on the micro-grinding performance. In this paper, the micro-grinding performance along different crystal orientation of HBCMs is investigated. First, a dressed 600^# diamond grinding wheel is used to micro-grind micro-structure on HBCMs. Then, the experiment of micro-grinding force test is completed. Finally, the quality of microgroove, the grinding ratio and the micro-grinding force are investigated and they are related to the crystal orientation of HBCMs. It is shown that the stronger resistance to the micro-crack propagation has the best quality of microgroove and the smallest grinding ratio. Moreover, the hardest single-crystal SiC has the best machinability and the micro-grinding force is 38.9%, 10.8% and 46.8% less than the one of sapphire, single-crystal Si and quartz glass, respectively. The direction to micro-grind easily is the crystal orientation 〈10\(\overline 1 \)0〉 for single-crystal SiC and sapphire. In addition, the micro-grinding force increases with the increase of the micro-grinding depth and feed rate and decreases with the increase of the grinding wheel speed.     

Lattice-based group signature with verifier-local revocation

Among several post quantum primitives proposed in the past few decades, lattice-based cryptography is considered as the most promising one, due to its underlying rich combinatorial structure, and the worst-case to average-case reductions. The first lattice-based group signature scheme with verifier-local revocation(VLR) is treated as the first quantum-resistant scheme supported member revocation, and was put forward by Langlois et al. This VLR group signature(VLR-GS) has group public key size of O(nm log N log q), and a signature size of O(tm log N log q log β). Nguyen et al. constructed a simple efficient group signature from lattice, with significant advantages in bit-size of both the group public key and the signature. Based on their work, we present a VLR-GS scheme with group public key size of O(nm log q) and signature size of O(tm log q). Our group signature has notable advantages: support of membership revocation, and short in both the public key size and the signature size.     

提速线路轨温对轨道横向位移影响实测分析

通过对某条提速线路曲线段的轨温及横向位移进行现场测试,分析了曲线段轨道结构在轨温变化时对轨排横向位移变化的影响.分析结果表明:在轨温较低的情况下,列车荷载激扰等随机因素是轨排横向位移的主因;在轨温较高时,轨排横向位移的主因则是轨道温度力.曲线段轨排横向位移的波形差异性较大,在日常工务养护中应以缓圆点附近的曲线作为养护重点.     

基于ITS的汽车主动避撞性关键技术研究(一)

利用信息感知、动态辨识、控制等技术与方法提高汽车的主动安全性，是智能交通系统（ITS）的主要研发内容之一。介绍了基于ITS的汽车主动避撞关键技术的研究工作，主要包括：车辆运动中对周围障碍物的感知技术方法；危险或安全状态的动态辨识；具有主动避撞性能的ACC（Adaptive Cruise Control）技术等；给出了相关技术研究的仿真及实验结果，并对该技术在我国的实用化前景进行了展望。     

汽车导航用电子地图的高效路网模型

为了有效地描述实际道路网络，提高汽车导航系统的运行效率，建立了一种新的电子地图的路网模型。在分析了嵌入式系统特点的基础上，对路网的数据结构进行了简化。采用重整实体ID的方法，进一步提高了数据的处理效率。实践证明，该模型可以较好地表述实际的道路网络，结构精练，处理效率高，适合车载导航系统，特别是嵌入式车载导航系统的要求。     

智能车辆机器视觉发展近况

简要回顾了机器视觉的早期发展，从简单的特定场合应用到模拟人眼的复杂系统设计，介绍了机器视觉产品在智能汽车上的应用情况，分析了世界各国在车用机器视觉技术领域研究开发情况以及未来发展趋势。     

基于CAN的混合动力汽车控制系统体系结构研究

在分析某型混合动力汽车的结构与工作原理的基础上，基于CAN总线技术，研究了控制系统的网络拓扑结构、节点功能及信息传递方式，以及硬件设计中的节点通信接口结构和控制系统的软件结构。其研究方法和结论为混合动力汽车以及其它类型车辆控制系统的研究和开发提供了理论依据和技术基础。     

电子节气门技术的发展现状及趋势

简要回顾了发动机电喷系统中电子节气门的由来及发展;论述了最新电子节气门产品的系统组成、工作原理、功能及其优点,并对其进一步的发展趋势作了分析探讨。     

液压系统配管设计及其故障分析

介绍现场机械设备液压系统维护中的配管设计，包括配管设计要求、主要技术性能参数、油管的选用以及设计要点。以一实例对配管设计不当而产生故障的原因进行分析，并提出改进措施。     

Study on dynamic characteristics of vehicle gearbox under multi-boundary conditions

With the development of vehicle gearbox to high-power-density and high-speed, how to predict and optimize the dynamic characteristics of vehicle gearbox becomes increasingly prominent. Aiming at the vehicle gearbox, this paper comprehensively and deeply studies the dynamic characteristics under the multi-boundary conditions. The generation mechanism of the multi-source excitations triggering the gearbox vibration is analyzed firstly. The vibration transfer path of the gearbox is explored. Secondly, the engine excitation, the gear meshing excitation and the bearing support load are numerically calculated. According to the finite element method, a fluid-solid coupling finite element model of the gearbox body is established to predict the gearbox dynamic responses based on the Galerkin method and the Hamiltonian variational principle. Finally, the effects of the excitation condition, oil height and reinforcement forms on the vibration responses of the gearbox body are thoroughly studied by simulation. The analysis indicates that it not only helps to modify and improve the method of forecasting the gearbox dynamic response, and also provides the theoretical and technical guidance for the gearbox design and optimization.