Engine performance and toxic gas analysis of biobutanol-blended gasoline as a vehicle fuel

A comprehensive study evaluating the performance of biobutanol-blended gasoline in passenger cars was conducted because biobutanol is considered a better biofuel than bioethanol as it has no water solubility and it has a higher caloric value, giving it a higher energy value. Several kinds of samples—suboctane gasoline, 8 volume percentage and 16 volume percentage biobutanol—blended gasoline, and a 10 volume percentage MTBE-blended market sample (as the oxygencontaining gasoline)-were tested to evaluate the engine performance in terms of the detergency of the intake valves and combustion chambers, power, emissions, and fuel efficiency. Additionally, the toxicity of the emissions from these biobutanolblended samples was tested in order to assess the viability of biobutanol as one of the competitive potential substitutes for MTBE as an oxygenator in the near future. The results show that biobutanol-blended gasoline samples had relatively better detergency, relatively higher power, and similar levels of emissions compared with those of MTBE-blended gasoline. Formaldehyde was emitted from all of the samples at almost the same levels and within the error range, whereas biobutanolblended gasoline samples emitted approximately three times the amount of acetaldehyde than did the suboctane gasoline. This study shows that biobutanol is one of the best alternative bioalcohol fuels for use in the near future.     

Development of hot stamped center pillar using form die with channel type indirect blank holder

The hot stamping process has been used in the automotive industry to reduce the weight of the body-in-white and to increase passenger safety via improved crashworthiness. However, defects such as fracture and wrinkle occur when hot stamping is performed using a conventional drawing or forming method. In this study, a channel-type indirect blank holder (CIBH) is proposed to develop a high-strength center pillar in form-type hot stamping, so that the aforementioned drawbacks are overcome. This type of blank holder plays an important role in reducing severe wrinkling at the flange; such wrinkling leads to folding after the completion of form-type hot-stamping. First, we investigated the effect of the channel shape on the indirect blank holding force by using a simplified two-dimensional plane-strain stamping process. Second, we selected the slope angle and corner radius of the channel as the main shape parameters by finite element analysis and artificial neural network (ANN). It is known that fracture at the hot formed wall and wrinkle at the flange are significantly affected by the slope angle of the channel, and the appropriate value for eliminating fracture and wrinkle is determined to be 99°. By performing hot stamping using a form die with the selected channel, we can manufacture a high-strength center pillar without wrinkle and fracture.     

Exact Equations for Tractrix Curves Associated with Vehicle Offtracking

Vehicle offtracking behavior at low speeds is closely approximated by a geometric entity called a tractrix. This paper presents differential equations for generalized coordinates of a planar multibody vehicle model based on tractrix behavior. The equations are exact, can be used with any type of input path, are valid for forward and backward movements, and are much simpler than previously published formulations used to compute transient offtracking. The differential equations can be integrated using conventional numerical integration algorithms to obtain plots of the low-speed tracking performance of articulated vehicles. The equations were formulated symbolically by a computer program used to analyze the kinematic and dynamic behavior of multibody systems. Example numerical results are plotted.     

Computer-Simulation of the Dynamical Curving Behaviour of a Railway-Bogie

This paper describes the modelling of a two axle railway-bogie with variable design configurations and its application in the investigation of the behaviour in transitional and circular curves. Several results indicate possibilities to improve the curving properties and recommend the usage of forced-steering bogies, which show better performance in narrow curves without unbearable sacrifices to high-speed-behaviour on straight track.     

Application of Inverse Models to Vehicle Optimization Problems

This paper presents a nonlinear inverse model of a road vehicle which simulates combined steering and braking/driving. The inputs to the model are the lateral and longitudinal acceleration of the vehicle's sprung mass center. The simulation returns the steering wheel angle and brake/drive torques required to obtain the desired accelerations. An example is presented which demonstrates the utility of inverse models for optimization purposes.     

Crosswind Sensitivity of Passenger Cars and the Influence of Chassis and Aerodynamic Properties on Driver Preferences

Results of vehicle crosswind research involving both full-scale driver-vehicle tests and associated analyses are presented. The paper focuses on experimental crosswind testing of several different vehicle configurations and a group of seven drivers. A test procedure, which utilized wind-generating fans arranged in alternating directions to provide a crosswind “gauntlet”, is introduced and described. Driver preferences for certain basic chassis and aerodynamic properties are demonstrated and linked to elementary system responses measured during the crosswind gauntlet tests. Based on these experimental findings and confirming analytical results, a two-stage vehicle design process is then recommended for predicting and analyzing the crosswind sensitivity of a particular vehicle or new design.     

Stochastic Optimal Control of Highway Tractors with Active Suspensions

Stochastic optimal control and estimation theories are used to design an active suspension system for a cab ride in a tractor-semitrailer vehicle. A discrete-continuous vehicle model with eleven degrees of freedom is augmented by a stochastic road excitation model and a human perception of vibration shape filter. Both perfect measurement and estimated state cases are considered. The impact of the measurement noise on the design of the optimal controller is demonstrated. The performance of the optimally controlled system is compared with an optimal passive system. It is shown that significant improvements in ride comfort can be achieved through the use of actively controlled cab suspensions.     

Analysis of Driver's Decelerating Strategy in a Car-following Situation

This report describes a decelerating driver-model expressed by driving mode transition in car-following situations. The assumptions for constructing the model are that decelerating strategy of a driver is classified into several simple driving modes and that a driver changs his driving modes based on his perceptible characteristics and experiential rules. Deceleration action is divided into three states; following, standing and braking, which are applied to the model. The model has two paths for driver's decelerating action, one of which is selected by the driver based on the perceptible characteristics and experiential rules. The suitability of the model has been experimentally verified.     

Dynamic Performance of a Bulkhead Flat Car

The dynamic performance of a flat car is studied herein. The performance indices include roll angles, lateral accelerations, center plate loads, side bearing loads, wheel loads and spring deflections. These variables are maximum when the car is running at its critical speed, corresponding to either the rock and roll, or the bounce mode. The Association of American Railroads' (AAR) Flexible Carbody Model was used. The input for vertical track irregularities used in the simulation was generated from published spectra for U.S. Federal Railroad Administration (FRA) Class 4 track. After studying the car's performance with various column loads and spring suspensions, it was found that the most commonly used column load of 4,000 lbs. (17.8 kN) should be used. The spring suspension used in the original car design should also be adopted, in order to avoid spring bottoming.