硅胶吸附管采集甲醇汽车尾气排放中甲醇的方法研究

文章主要研究了利用硅胶吸附管采集甲醇汽车尾气排放中甲醇的方法,对硅胶吸附管的规格、待测样品的浓度、采样参数等进行了详细的讨论及验证。研究表明,利用硅胶吸附管采集甲醇的过程中,很容易发生甲醇的穿透。随着硅胶颗粒装填数目的增加,甲醇的穿透率降低,实际吸附甲醇的效率增加。在采样流量相同时,待测样品浓度越高,甲醇的穿透率越高。在待测样品浓度相同时,采集流量越高,甲醇的穿透率越高。将硅胶吸附管串联,可以有效减少甲醇的穿透,提高吸附效率。     

船舶小组立装焊作业单元CPS系统研究与应用

当前船厂小组立装焊作业过程存在作业任务信息无法直接传递至现场,现场实际执行的状态信息无法及时反馈等问题,导致装焊作业混乱、装焊效率低下.为了解决上述问题,针对船舶小组立装焊作业单元进行研究,构建基于信息物理融合(CPS)的智能制造系统.首先分析了小组立装焊作业流程;然后梳理了装焊作业任务数据,构建了小组立装焊作业数据模型,并在此基础上,完成了基于物联网的CPS框架设计以及系统功能开发,实现了对装焊作业过程的有效监控;最后将该系统应用于某船厂小组立装焊现场,有效规范了装焊作业过程,提高了装焊效率.     

导电密封胶对不锈钢车体电阻点焊焊接性能影响研究

分析了电阻点焊原理,对相同的点焊搭接方式,分别采用3种工况进行焊接试验。3种工况分别采用相同焊接参数对搭接接触面涂导电密封胶和不涂导电密封胶的试件进行焊接;优化焊接参数后,对搭接接触面涂导电密封胶的试验件进行焊接。对3种工况下完成的焊接试件进行拉伸力检测试验、金相熔核尺寸检测和缺陷检测试验,对熔核直径、拉伸力、熔核内部缺陷的试验结果进行分析。试验结果表明:导电密封胶对电阻点焊的焊接性能存在影响;通过适当优化焊接参数,可以提高涂导电密封胶试件的焊接性能,焊接质量能够满足产品焊接要求。     

Hybrid process of fabricating high-quality micro wine-glass fused silica resonators

A new hybrid method, which combines improved glass-blown technology with wet etching, is reported to fabricate micro wine-glass resonators with high-quality fused silica. The optimum placement is compared to achieve the resonators with good shell shape. The typical shell diameter is about 4mm and its thickness covers from dozens to hundreds of micrometers. The etching rates in corrosion solutions with different ratios and at different thicknesses of hemispherical shells are studied. We also conclude how to precisely control the thickness. The corrosion solutions with different ratios of HF solution to NH₄F solution make the spherical shells rougher in different degrees. The best roughness is 0.581 nm in the 1: 8 ratio corrosion solution while the original roughness is 0.537 nm. This fact shows that the resonator remains atomically smooth surface. Based on the glassblowing spherical fused silica structure, the thickness of the resonator is effectively controlled by buffered oxide etch (BOE) technology according to the measured etching rate. The measured resonant frequency of the hemispherical shell at ambient pressure and room temperature is 1.75 kHz of rocking mode which is close to the simulated frequency. Using such a low-cost hybrid approach, we can fabricate high-quality microscale resonators in batch.     

Estimation of delay variability at signalized intersections for urban arterial performance evaluation

Urban arterial performance evaluation has been broadly studied, with the major focus on average travel time estimation. However, in view of the stochastic nature of interrupted flow, the ability to capture the characteristics of travel time variability has become a critical step in determining arterial level of service (LOS). This article first presents a stochastic approach that integrates classic cumulative curves and probability theories in order to investigate delay variability at signalized intersections, as a dominant part of the link travel time variability. This serves as a basis for arterial travel time estimation, which can be obtained through a convolution of individual link travel time distributions. The proposed approach is then applied in the estimation of travel time along one arterial in Shanghai, China, with abundant automatic vehicle identification (AVI) data sources. The travel time variability is evaluated thoroughly at 30-min intervals, with promising results achieved in comparison to the field measurements. In addition, the estimated travel time distributions are utilized to illustrate the probability of multiple LOS ranges, namely, reliability LOS. The results provide insights into how we might achieve a more reliable and informative understanding of arterial performance.     

Subjective-utility travel time budget modeling in the stochastic traffic network assignment

ABSTRACT

In this article, we propose a new model called subjective-utility travel time budget (SU-TTB) model to capture travelers' risk-averse route choices. In the travel time budget (TTB) and mean-excess travel time (METT) model, a predefined confidence level is needed to capture the risk-aversion in route choice. Due to the day-to-day route travel time variations, the exact confidence level is hard to be predicted. With the SU-TTB model, we assume travelers' confidence level belongs to an interval that they may comply with in the route choice. The two main components of SU-TTB are the utility function and the TTB model. We can show that the SU-TTB can be reduced to the TTB and METT model with proper utility function for the confidence levels. We can also prove its equivalence with our recently proposed nonlinear-expectation route travel time (NERTT) model in some cases and give some new interpretation on the NERTT with this equivalence. Finally, we formulate the SU-TTB model as a variational inequality (VI) problem to model the risk-averse user equilibrium (RAUE), termed as generalized RAUE (GRAUE). The GRAUE is solved via a heuristic gradient projection algorithm, and the model and solution algorithm are demonstrated with the Braess's traffic network and the Nguyen and Dupuis's traffic network.     

The changes of neuronal activity of the zone incerta in a rodent model of Parkinson＇s disease

Objective To study the changes in neuronal activity of the zone incerta (ZI) following the unilateral lesion of the nigrostriatal pathway. Methods Eiectrophysiological recordings of ZI neurons were made in normal rats and in two groups of rats at different time intervals after injection of 6-hydrodopamine (6-OHDA) into the pars compacta of snbstantia nigra by extracellular recording in vivo. Results The results showed a significant increase in the mean firing rate of ZI during the second and fourth weeks after 6-OHDA lesion [-n=32, (3.6±2. 2)Hz, P<0.001; n=35, (9.3±6.6)Hz, P<0. 001, respectively] compared to that of normal rats [n=39, (9.2±5.2)Hz]. However, no significant change was observed between two groups of 6-OHDA-lesioned rats. With regard to firing pattern, 7.7%(3/39) of ZI neurons discharged regularly, 82.1% (32/39) irregularly and 10. 3% (4/39) in bursts in normal rats. During the second week after 6-OHDA lesion, the regular, irregular and bursting firing neurons recorded in the ZI were 9.4% (3/32), 59. 4% (19/32) and 31.3% (10/32), and during fourth week, the regular, irregular and bursting firing neurons were 14.3% (5/35), 57.1% (20/35) and 28. 6% (10/35), respectively. The firing pattern of the neurons in the three different groups did not change significantly. Conclusion These results suggest that the firing rate of ZI neurons in 6-OHDA-lesioned rats is increased significantly, which may contribute to the pathophysiology of Parkinson's disease.     

一级公路交叉口设计中的交通安全问题及对策

一级干线公路由于开口较多,不可避免地存在较多的交通安全问题.文章以湖北荆监一级公路为例,针对交叉口设计中的交通安全典型问题,提出了改善方法及相关对策.     

改进不等时距GM模型在施工控制中的应用

刚构桥施工过程中应力变化复杂,影响因素多,较难预测把握应力发展趋势,实测应力缺失时,单一使用GM(1,1)模型预测精度低,对原始应力数据要求苛刻.文章改进了不等时距GM(1,1)模型,结合罗天乐特大桥工程进行验证,结果表明,改进不等时距GM(1,1)模型在刚构桥施工应力预测中具有较好的适用性和较高的预测精度.     

湖北省高等职业院校数字校园发展现状及趋势——以武汉铁路职业技术学院为例

国家中长期教育改革和发展规划纲要(2010-2020年)描绘了我国未来10年教育改革发展的宏伟蓝图,也为我国高等职业院校的信息化改革和发展提出了新的总体要求。本文以武汉铁路职业技术学院未来10年信息化发展规划为例,结合学院信息化发展现状和实际情况,提出了适合高等职业院校信息化特点的发展演进模式,对高等职业院校信息化发展模式提供有益借鉴。