The implications of MARPOL Annex V on the management of ports and coastal communities

Abstract

The passage of the Marine Plastics Pollution Research and Control Act of 1987 (MPPRCA), which codified Annex V of the International Convention for the Prevention of Pollution from Ships (MARPOL), has encompassed every commercial and recreational shipping and boating facility in the United States. As a group, these ports, harbors, and marinas form a significant, although proportionately small, portion of the coastline of the country. More important, the economic benefits derived from the complex shoreside infrastructures required for international ocean trade, commercial and recreational fishing, and pleasure boating indicate just how critical it is for these facilities to be in conformance with effective and prudent coastal zone and environmental management practices.     

The problems of hydrocarbon extraction

The problems associated with hydrocarbon extraction in the EEZ are discussed under the headings of resources and environment, technology and the industrial structure, government management, decision-making, and policy formulation. Policy areas identified include boundary delimitation relative to resources, environment and technology, co-ordination and decision-making machinery, relationships with UK and EEC energy policies, and regional planning of the sea and coastal areas used by the off-shore industry.     

Application of genetic algorithms for joint optimization of signal setting parameters and dynamic traffic assignment for the real network data

This paper presents the joint optimization of signal setting parameters and dynamic user equilibrium (DUE) traffic assignment for the congested urban road network. The simulation-based approach is employed to obtain the DUE condition for the case of multiple-origin multiple-destination traffic flows. The dynamic traffic assignment simulation program (DTASP), developed in C language is used to assign the traffic dynamically on the road network, whereas method of successive averages (MSA) is modified and used to arrive at the DUE condition. The artificial intelligence technique of genetic algorithms (GAs) is applied to obtain the optimal signal setting parameters and path flow distribution factor for DUE condition. The methodology developed in such a way that joint optimization of signal setting parameters with DUE is obtained. The proposed method is applied to the real network data of Fort Area of Mumbai city comprising of 17 nodes and 56 unidirectional links with 72 Origin–Destination pairs, where all the 17 nodes are signalized intersections. The traffic flow condition for the optimized signal setting parameters is considerably improved compared to the existing signal settings. The results prove that the GA is an effective technique to solve the joint optimization problem for the real network data.     

Cooperative tourism and the coastal zone

Abstract

Most tourist development takes place in the coastal zone. Concentrated tourist use continues in spite of opposition by groups who feel that any tourism, especially international, threatens both the natural environment and local values. Although shorelines and “coastscapes”; belong to all, decisions regarding them are made by relatively few. The number of community organizations involved in coastal zone management decisions varies from almost none in some Third World countries to dozens in places like Hawaii or California. Constructive use of coastal zones requires an understanding of the interactions between biophysical and social systems. Planning tourism in this context requires that all groups with an interest in the coastal zone join in a new “cooperative tourism”; in which all contribute to decisions and face ultimate responsibilities.     

Nanoparticle emission characteristics and reduction strategies by boost pressure control and injection strategies in a passenger diesel engine

This research attempted to analyze nanoparticles and other harmful exhaust emissions in accordance with injection strategies and air-fuel ratio (AFR) changes for small diesel engines. The emission characteristics were analyzed in the medium-speed condition, which is the main driving range of a diesel engine. In the case of particulate matter (PM), the number of particles was measured, analyzed, and compared to identify the correlation and emission characteristics of nanoparticles by using a dilution device and condensation particle counter (CPC), which are international standards for particle measurement recommended by the Particulate Measurement Programme (PMP). The engine torque tended to be reduced as pilot injections were added, and the torque was increased by the increased boost pressure, but reduced by the exhaust pressure increase in a part of the low-load range. The number of nanoparticles was not influenced greatly by the change in AFR, but the reduction effect on the PM weight was great depending on the boost pressure increase. In addition, the number of nanoparticles tended to increase as the fuel injection timing became closer to TDC in all conditions, and its difference became larger with an increase in AFR. In addition, in the case of the pilot injection, nanoparticle emission showed similar characteristics depending on the main injection timing, but it was increased by advanced injection timing when performing the main injection only, and the number of the nanoparticles increased as pilot injections were added. Last, the optimal conditions for EMS calibration were analyzed by selecting the conditions of torque reduction and NOx increase within 5 % from all of the engine operating conditions; optimized conditions are presented.     

Impact of regional population density on walking behavior

Land use can influence walking (measured by the number of steps) and so the health of people. This paper presents the result of empirical research on the impact of regional population densities (inhabitants per inhabitable area) on the number of steps (all steps, both outdoors and indoors). With data collected from almost 11,000 respondents in 148 Japanese regions, we estimate polynomial regression models, the total number of steps being the dependent variable and densities being the main independent variable. Regional population density significantly affects the number of steps after controlling for individual and household attributes. The estimated population density that maximizes the number of steps is around 11,000?persons/km². Increasing densities, up to levels of around 11,000?inhabitants/km², could increase walking and consequently the health of inhabitants. The population density elasticity of the number of steps is 0.046–0.049 in a simple log linear regression model without a peak.     

The structure of dissipation in the western Irish Sea front

We report on an intensive campaign in the summer of 2006 to observe turbulent energy dissipation in the vicinity of a tidal mixing front which separates well mixed and seasonally stratified regimes in the western Irish Sea. The rate of turbulent dissipation ε was observed on a section across the front by a combination of vertical profiles with the FLY dissipation profiler and horizontal profiles by shear sensors mounted on an AUV (Autosub). Mean flow conditions and stratification were obtained from a bed mounted ADCP and a vertical chain of thermistors on a mooring. During an Autosub mission of 60 h, the vehicle, moving at a speed of ~ 1.2 m s^− 1, completed 10 useable frontal crossings between end points which were allowed to move with the mean flow. The results were combined with parallel measurements of the vertical profile of ε which were made using FLY for periods of up to 13 h at positions along the Autosub track. The two data sets, which show a satisfactory degree of consistency, were combined to elucidate the space–time variation of dissipation in the frontal zone. Using harmonic analysis, the spatial structure of dissipation was separated from the strong time dependent signal at the M₄ tidal frequency to yield a picture of the cross-frontal distribution of energy dissipation. A complementary picture of the frontal velocity field was obtained from a moored ADCP and estimates of the mean velocity derived from the thermal wind using the observed density distribution. which indicated the presence of a strong (0.2 m s^− 1) jet-like flow in the high gradient region of the front. Under neap tidal conditions, mean dissipation varied across the section by 3 orders of magnitude exceeding 10^− 2 W m^− 3 near the seabed in the mixed regime and decreasing to 10^− 5 W m^− 3. in the strongly stratified interior regime. The spatial pattern of dissipation is consistent in general form with the predictions of models of tidal mixing and does not reflect any strong influence by the frontal jet.