宜万铁路别岩槽隧道F3 断层突发性涌水治理

宜万铁路别岩槽隧道F3断层在初期支护完成后,由于受地表强降雨影响,突发大规模涌水,使初期支护严重变形。文章主要介绍了F3断层的涌水事故、应急预案,以及通过采取“径向注浆加固-初期支护加强-及时施作二次衬砌”等综合技术措施,有效地治理了F3断层涌水-变形段。     

浅谈气幕法沉井在防汛排水工程中的应用

结合工程实例对气幕法沉井工艺有效减低井周土体扰动的原理,有利于减少沉井工程周边管线与构筑物搬迁,降低沉井工程的成本等优势及该工艺的应用进行分析和探讨,总结了一些经验,认为该工艺是在城市化地区沉井施工中一种值得采用的施工措施。     

参数化装配实体模型在柴油机总体概念设计中的应用

结合并行工程产品结构概念设计理论 ,提出了在柴油机总体概念设计中使用参数化装配模型的设计方法和实现手段。基于I-DEAS软件 ,针对部分研究内容进行了二次开发 ,采用基于特征的变结构参数化建模技术生成了柴油机各零部件局部特征库和参数化简化模型库 ,并依据柴油机总体装配树型结构建立参数化装配模型 ,最后对总体装配模型进行运动仿真和静、动态干涉检查。     

Optimum design of tilting bogie frame in consideration of fatigue strength and weight

This paper addresses the use of finite-element (FE) analysis to calculate the fatigue strength of a bogie frame, for the development of tilting trains in Korea. A multi-body dynamic analysis was performed to extract the load condition by tilting on curves. Using the results of the multi-body dynamic analysis and the load scenario setout in the UIC standard, FE analysis was performed to obtain the stress distribution and to calculate the fatigue strength. An attempt was made to minimize the weight of the bogie frame using a back-propagation artificial neural network (ANN). The results of this study reveal that the stresses at some nodes are near the fatigue limit in the Goodman diagram and by using back-propagation ANN, the weight of the bogie frame could be reduced by 4.7%.     

营业线施工应增加有关概算费用的探讨

针对目前铁道部有关加强行车安全的文件与设计概算编制规定不协调的问题,笔者提出了自己的看法.     

Seabed scene simulation and its realization in extending Vega

Realistic simulation of underwater scene is always difficult because of the special and complex vision effects in underwater space. Seabed is an important part of underwater environment. This paper describes the methods for seabed scene simulation based on OpenGL. It includes construction of fluetuant terrain based on the random sinusoidal algorithm, simulation of seabed flicker effect by means of circular texture mapping and generation of turbidity effect by using fog techniques. For the application based on the leading high level 3D development environment-Vega, underwater scene simulation is still a difficulty since there is no module for it. Based on the analysis of Vega software and the research on seabed scene simulation methods, a Vega extending module named “Underwater Space” was created through developing module class and extending lynx interface. The module class was designed through developing DLL written in C . The Lynx was extended through developing keyword configure file, GUI configure file and lynx plug-in DLL. The problem that Vega can‘t simulate underwater space, is elementarily resolved. The results show that this module is efficient, easy using, and the seabed scene images am vivid.     

不规则构件钢筋的自动翻样技术探索

针对异形屋面结构中经常采用的不规则形状折梁设计,施工过程中充分利用AutoCAD三维立体图的方式,完成不规则折梁钢筋的翻样,化解翻样难度,提高翻样效率,保证翻样精度,同时阐述了如何解决施工过程中遇到的安装问题。     

Development of hot stamped center pillar using form die with channel type indirect blank holder

The hot stamping process has been used in the automotive industry to reduce the weight of the body-in-white and to increase passenger safety via improved crashworthiness. However, defects such as fracture and wrinkle occur when hot stamping is performed using a conventional drawing or forming method. In this study, a channel-type indirect blank holder (CIBH) is proposed to develop a high-strength center pillar in form-type hot stamping, so that the aforementioned drawbacks are overcome. This type of blank holder plays an important role in reducing severe wrinkling at the flange; such wrinkling leads to folding after the completion of form-type hot-stamping. First, we investigated the effect of the channel shape on the indirect blank holding force by using a simplified two-dimensional plane-strain stamping process. Second, we selected the slope angle and corner radius of the channel as the main shape parameters by finite element analysis and artificial neural network (ANN). It is known that fracture at the hot formed wall and wrinkle at the flange are significantly affected by the slope angle of the channel, and the appropriate value for eliminating fracture and wrinkle is determined to be 99°. By performing hot stamping using a form die with the selected channel, we can manufacture a high-strength center pillar without wrinkle and fracture.     

Bicyclist commuters’ choice of on-street versus off-street route segments

When using limited funds on bicycle facilities, it would be helpful to know the extent to which a new facility will be used. If a bicycle lane is added to a street, how many bicyclists will no longer use the adjacent sidewalk? If a separate bicycle path is constructed, how many bicyclists will move from the street or sidewalk? This study seeks to identify factors that explain a bicyclist’s choice between available facility choices—off-street (sidewalk and bicycle path) or on-street (bicycle lane and roadway). This paper investigates these issues through a survey of bicyclists headed to Purdue University in West Lafayette, IN, USA. The first data collected to address these questions were “site-based”. Bicyclists were interviewed on campus at the end of their trips and asked which part of the cross-sections along their routes they had used—on-street or off-street. The characteristics of a particular cross-section of street right-of-way were then compared against the characteristics of each bicyclist and his/her observed choice of street, sidewalk, lane, or path. Later, “route-based” serial data were also added. The study developed a mixed logit model to analyze the bicyclists’ facility preferences and capture the unobserved heterogeneity across the population. Effective sidewalk width, traffic signals, segment length, road functional class, street pavement condition, and one-way street configuration were found to be statistically significant. A bicycle path is found to be more attractive than a bicycle lane. Predictions from the model can indicate where investments in particular bicycle facilities would have the most desirable response from bicyclists.