溃坝问题的数值仿真和实验

In this paper, two novel numerical computation methods are introduced which have been recently developed at Research Institute for Applied Mechanics ( RIAM ), Kyushu University, for strongly nonlinear wave-body interaction problems, such as ship motions in rough seas and resulting green-water impact on deck. The first method is the CIP-based Cartesian grid method, in which the free surface flow is treated as a multi-phase flow which is solved using a Cartesian grid. The second method is the MPS method, which is a so-called particle method and hence no grid is used. The features and calculation procedures of these numerical methods are described. One validation computation against a newly conducted experiment on a dam break problem, which is also described in this paper, is presented.     

中速三体船型PCC的可行性研究

In the present paper, a new trimaran Pure Car Carrier (PCC) is proposed and a feasibility study on the ship is carried out. In this study, first, the effective horse power (EHP)/car of the PCC running in still water is predicted. By comparing the predicted EHP/car with that of a conventional mono-hull PCC, it is found that the trimaran PCC is superior to the conventional mono-hull PCC at rather higher speed. As ship speed increases, the reduction of the resistance of the trimaran is bigger. It is also found that at common service speed of PCCs, the EHP/car of a small PCC is lower than that of a conventional PCC. Secondly, the optimal L/B of a main-hull of the trimaran PCC in still water is determined. The optimal L/B of the main-hull varies with ship speed and size because the wave resistance decreases but the frictional resistance increases as L/B of the hull increases. As ship size increases, the optimal L/B of the main-hull of the trimaran PCC decreases.     

强风下有帆商船航行性能的研究

Ships which have large structures above water surface, such as pure car carriers (PCCs) and container vessels, have large speed reduction by wind pressure. In the present study, the running speed of a large PCC with two or more sails for using wind power is simulated. The simulated results demonstrate that the ship can keep a constant service speed even in winds of 20m/s except head and bow winds. This sail system can shorten annual average navigation time by about 4 hours per voyage.     

非结构化网格浸入边界法的流固耦合数值模拟

This paper presents an improved unstructured grid immersed boundary method. The advantages of both immersed boundary method and body fitted grids which are generated by unstructured grid technology are used to enhance the computation efficiency of fluid structure interaction in complex domain. The Navier-Stokes equation was discretized spacially with collocated finite volume method and Euler implicit method in time domain. The rigid body motion was simulated by immersed boundary method in which the fluid and rigid body interface interaction was dealt with VOS (volume of solid) method. A new VOS calculation method based on graph was presented in which both immersed boundary points and cross points were collected in arbitrary order to form a graph. The method is verified with flow past oscillating cylinder.     

钢夹层板数值模拟技术

Sandwich plate systems (SPS) are advanced materials that have begun to receive extensive attention in naval architecture and ocean engineering. At present, according to the rules of classification societies, a mixture of shell and solid elements are required to simulate an SPS. Based on the principle of stiffness decomposition, a new numerical simulation method for shell elements was proposed. In accordance with the principle of stiffness decomposition, the total stiffness can be decomposed into the bending stiffness and shear stiffness. Displacement and stress response related to bending stiffness was calculated with the laminated shell element. Displacement and stress response due to shear was calculated by use of a computational code write by FORTRAN language. Then the total displacement and stress response for the SPS was obtained by adding together these two parts of total displacement and stress. Finally, a rectangular SPS plate and a double-bottom structure were used for a simulation. The results show that the deflection simulated by the elements proposed in the paper is larger than the same simulated by solid elements and the analytical solution according to Hoff theory and approximate to the same simulated by the mixture of shell-solid elements, and the stress simulated by the elements proposed in the paper is approximate to the other simulating methods. So compared with calculations based on a mixture of shell and solid elements, the numerical simulation method given in the paper is more efficient and easier to do.     

周期性波动管流的压降研究

Experiments were conducted to study characteristics of flow when flow is fluctuating. The experimental results showed a phase difference between the flow rate and the pressure drop fluctuations. This phase difference between the fluctuating flow rate and pressure drop was analyzed for laminar flow. Analysis showed that the phase difference changes with the period of the flow fluctuation, the pipe radius, the density and the dynamic viscosity of the liquid. Fluctuating pipe flow was then numerically simulated. Results of the numerical simulation were compared with theoretical values and experimental results. It was shown that, when the flow rate fluctuates with time as a sine wave, the pressure drop fluctuates with the same periodicity, and there is a phase difference between them.     

结构动力学基于摄动法的高阶非线性随机有限元方法研究

Several algorithms were proposed relating to the development of a framework of the perturbation-based stochastic finite element method (PSFEM) for large variation nonlinear dynamic problems. For this purpose, algorithms and a framework related to SFEM based on the stochastic virtual work principle were studied. To prove the validity and practicality of the algorithms and framework, numerical examples for nonlinear dynamic problems with large variations were calculated and compared with the Monte-Carlo Simulation method. This comparison shows that the proposed approaches are accurate and effective for the nonlinear dynamic analysis of structures with random parameters.     

柴油机电控直列泵系统压力动态特性研究

The electronic in-line pump (EIP) is a complex system consisting of mechanical, hydraulic, and electromagnetic parts. Experimental study showed that the fuel pressure of the plunger and the fuel drainage of the pressure system after fuel injection could result in fuel pressure fluctuation in the low pressure system. Such fluctuation exhibited pulsating cycle fluctuation as the amplitude rose with the increase of the injection pulse width. The time domain analysis found that the pressure time history curve and injection cylinders corresponded with a one-to-one relationship. By frequency domain analysis, the result was that with the increase of the working cylinder number, the high frequency amplitude gradually increased and the basic frequency amplitude gradually decreased. The conclusion was that through wavelet transformation, the low pressure signal simultaneously moved towards low frequency as the high frequency of the wavelet transformation signal with the working cylinder number increased. Lastly, by using the numerical model, the study investigated the simulation research concerning the relationship of the fluctuation dynamic characteristic in the low pressure system and the fuel injection characteristic of the high pressure system, completing the conclusions obtained by the experimental study.     

流场中任意厚度阻尼复合圆柱壳的声辐射

The insertion loss of acoustic radiation of damped cylindrical shell described by 3-D elasticity Navier equations under radial harmonic applied load in fluid is presented. The classical integral transform technique, potential theory and Lamè resolution are used to derive the solutions of Navier equations. The higher precision inversion computation is introduced to solve the linear equations. Comparing with acoustic radiation of one-layer cylindrical shell, the influence of thickness, mass density, dilatational wave loss factor and Young's modulus of damping material and circumferential mode number of the cylindrical shell on the insertion loss is concluded. The theoretical model in the paper can be used to deal with the arbitrary thickness and any frequency of the coated layer in dynamic problem. The conclusions may be of theoretical reference to the application of damping material to noise and vibration control of submarines and underwater pipes.     

二维水翼型空化流的数值计算

In order to predict the effects of cavitation on a hydrofoil, the state equations of the cavitation model were combined with a linear viscous turbulent method for mixed fluids in the computational fluid dynamics (CFD) software FLUENT to simulate steady cavitating flow. At a fixed attack angle, pressure distributions and volume fractions of vapor at different cavitation numbers were simulated, and the results on foil sections agreed well with experimental data. In addition, at the various cavitation numbers, the vapor fractions at different attack angles were also predicted. The vapor region moved towards the front of the airfoil and the length of the cavity grew with increased attack angle. The results show that this method of applying FLUENT to simulate cavitation is reliable.