Impact technique for measuring global dynamic stiffness of engine mounts

Engine mounts are used for engine vibration isolation. The dynamic performance of the mount depends on the orientation. Measurements of the dynamic properties of engine mounts are usually performed in the axial direction because of the problem related to actuator loading direction and set up costs. Impact technique is developed here to measure the dynamic driving point stiffness and driving point shear stiffness of engine mount in a single setup. The compressive and shear frequency-dependent stiffnesses are obtained in the vertical orientation. A transformation matrix is used to calculate the frequency-dependent stiffnesses and loss factors in other orientations. Three different designs of engine mounts are used to verify the accuracy of the transformation model. The correlation coefficient between calculation and measurement results show R²≥ 0.995 along the X- and Y-axes. For the Z-axis, mounts B and C showed R²≥ 0.95 and mount A 0.687 ≤ R²≤ 0.791.     

Methodology for bus structure torsion stiffness and natural vibration frequency prediction based on a dimensional analysis approach

Engineering bus design requires testing of bus structures prototypes in order to guarantee a certain level of strength and an appropriate static and dynamic behavior of the bus superstructure when exposed to road loads. However, experimental testing of real bus structures is very expensive as it requires expensive resources and space. If testing is done on a scale bus model the previous required expenses are considerably reduced. Therefore, a novel methodology based on dimensional analysis applied to bus structure prediction to evaluate the bus structure static and dynamic performance is proposed. The static performance is evaluated attending to torsion stiffness and the dynamic in terms of the natural vibration frequencies and rollover threshold. A scale bus has been manufactured and dimensionless parameters have been defined in order to project the results obtained in the scale bus model to a larger model. Validation of the proposed methodology has been carried out under experimental and finite element analysis.     

基于批量分割的虚拟单元制造系统多阶段动态调度

鉴于虚拟单元中批量分割调度模型研究的不足以及虚拟单元下批量分割呈现的新特点,文中考虑作业车间中同类设备有多台,多重作业具有不同加工路径可选的情况下的批量调度问题,其中批量分割包含横向分割和纵向分割。考虑到调度的复杂性,文中运用一个多阶段调度模型对设备资源进行分配,确定设备上的批量种类、大小和顺序,并在交货期内使总生产成本达到最小。通过算法对案例研究结果的对比,证明了所提方法的可行性和有效性。     

Construction Risk Management for Deep Excavation Adjacent to In operation Bored Tunnels

营运中的盾构隧道在邻近施工时周围地盘的应力可能因扰动而重新分布,使得盾构隧道暴露在因变形或位移衍生的结构损坏或营运中断等高风险下。为降低相关风险发生的可能性或后果的严重性,高雄计划将高雄车站段地下化工程捷运-R11永久站施工纳入风险管理,通过风险辨识、分析、评估以及以监测、巡检及沟通为基础的风险追踪查核等手段执行风险管理。依本计划执行成果,位于基地两侧营运中的盾构隧道在永久站主体工程开挖施工期间,各项风险均受到妥善的追踪、管控及处置。     

限制性Ⅲ级航道船舶下沉量研究

简要分析了影响内河船舶下沉量的主要因素,介绍了国内外关于船舶下沉量的研究概况及相关近似计算公式.根据Ⅲ级航道船舶下沉量测试物理模型试验结果,提出了适合内河限制性Ⅲ级航道的船舶下沉量近似计算公式.计算结果与模型试验结果对比表明,该公式达到了较高的计算精度,对航道水深计算及航道断面设计具有重要的参考价值.     

TBM掘进数据标准化预处理方法研究北大核心CSCD

TBM信息化采集了海量数据,对TBM数据的标准化预处理是进行诸多研究的前提。基于此,提出了一种TBM掘进数据标准化处理方法,依托TBM现场施工掘进大数据,以破岩特征为依据选取基本掘进参数(刀盘转速、推进速度、刀盘推力及刀盘扭矩)分析掘进过程TBM数据特点,提出循环掘进过程空推段、上升段、稳定段及下降段起点的判别方法,对稳定段起点提出了标准差法判别方法、均值判别方法、直方图判别方法,满足实时和非实时的数据划分需求。最后对两个TBM工程的数据进行标准化预处理,实现施工大数据的标准化。结果表明,提出的标准化预处理方法可实现循环掘进过程数据的有效划分。研究成果可推广应用于众多TBM工程的数据标准化处理,有效实现机器学习数据库的建立。     

Surface reconstruction of scanned human body using radial basis functions and adaptive partition of unity

It is important to reconstruct a continuous surface representation of the point cloud scanned from a human body. In this paper a new implicit surface method is proposed to reconstruct the human body surface from the points based on the combination of radial basis functions (RBFs) and adaptive partition of unity (PoU). The whole 3D domain of the scanned human body is firstly subdivided into a set of overlapping subdomains based on the improved octrees. The smooth local surfaces are then computed in the subdomains based on RBFs. And finally the global human body surface is reconstructed by blending the local surfaces with the adaptive PoU functions. This method is robust for the surface reconstruction of the scanned human body even with large or non-uniform point cloud which has a sharp density variation. Foundation item: the National Natural Science Foundation of China (No. 50575139) and the Shanghai Special Fund of Informatization (No. 088)     

利用TRIzol(R)试剂和液氮提取大鼠胰腺高质量总RNA

目的 建立胰腺高质量总RNA快速、经济、稳定的提取方法.方法 应用TRIzol(R)试剂和液氮提取大鼠胰腺总RNA,通过总RNA含量和A260/280比值的测定及10g/L非变性琼脂糖凝胶电泳评估总RNA的质量,并用RT-PCR检测大鼠胰岛素1、胰高血糖素、胰α-淀粉酶和β-actin的表达.结果 利用TRIzol(R)和液氮提取的大鼠胰腺总RNA量可达到3～6μg/mg胰腺组织,A260/280比值在1.75～1.89之间.在10g/L非变性琼脂糖凝胶电泳时,均可见28S及18S条带,并且在28S、18S条带间可见明显的云雾状阴影.大鼠胰岛素1、胰高血糖素、胰α-淀粉酶、β-actin RT-PCR产物电泳结果显示均有清晰的条带.结论 应用TRIzol(R)试剂和液氮成功地提取了大鼠胰腺高质量的总RNA,后者可用于RT-PCR研究.     

Protective effect of glutamine pretreatment on ischemia-reperfusion injury of spinal cord in rabbits

Objective To investigate the effect of glutamine (Gln) on the content of reduced glutathione hormone (GSH) and aminoglutaminic acid (Glu) of spinal cord following ischemia-reperfusion injury. Methods Totally 40 healthy adult male rabbits were randomly divided into five groups: sham-operation group (S group), ischemia-reperfusion injury group (I/R group), low-dose glutamine group (L Gln group), median-dose glutamine group (M Gln group) and high-dose glutamine group (H Gln group). After glutamine preconditioning, the model of spinal cord ischemia-reporfasion injury was established according to Zivin's method. The general status of animals was observed and the changes of Jacobs scoring were recorded in each group. Malondialdehydes (MDA), GSH, Glu and superoxide dismutase (SOD) activity in lumbar spinal cord tissues were determined using chemical colorimetry. The neuron number and deviation rate in spinal cord anterior horn were observed histopathologically. Results There was no significant difference between L Gin group and I/R group in behavior scoring, SOD activity, content of MDA and Glu, neuron number and deviation rate of spinal cord (P>0.05); however, there was a significant difference in GSH content of spinal cord (P<0.05). M Gln group and I/R group differed significantly (P<0.05) in behavior scoring, SOD activity, content of MDA, Glu, GSH, neuron number and deviation rate of spinal cord. Between H Gln group and M Gln group, there was no significant difference in behavior scoring, content of MDA and Glu, SOD activity, neuron number and aberration rate in spinal cord (P>0.05), whereas there was a significant difference in SOD activity and Giu content (P<0.05). Conclusion Pretreatment with medium-dose glutamine has a protective effect on spinal cord ischemia-reporfasion injury in rabbits, which may be related to the maintenance of GSH content, increase of SOD activity and reduction of MDA.     

疲劳驾驶检测方法的研究进展

全世界每年因驾驶员疲劳驾驶而导致的死亡人数占交通灾难性事故的57%,故针对疲劳驾驶检测方法的研究具有现实意义.阐述了目前国内外各类疲劳驾驶检测方法的研究难点,介绍并对比分析了基于驾驶员生理参数、驾驶员行为特征、车辆行为特征的各类客观检测方法;最后对疲劳驾驶检测方法的发展趋势和应用前景进行了论述.