Dynamics of the railway track and the underlying soil: the boundary-element solution, theoretical results and their experimental verification

A combined finite-element boundary-element method is presented in detail to calculate the dynamic interaction of the railway track and the underlying soil. A number of results are shown for ballasted and slab track, demonstrating the influence of the stiffness of the soil and the rail pads on the vertical compliance of the track. The compliance of the track is combined with a simple model of the vehicle giving the transfer function of vehicle-track interaction. An experimental verification of the theoretical results is achieved by harmonic and impulse excitation with and without static (train-) load and by combined measurements of train-track-soil interaction. A clear vehicle-track resonance is found for the slab track with elastic rail pads and for higher frequencies at highspeed traffic, the dynamic axle loads due to sleeper passage are reduced.     

Modeling the structural relationships among short-distance travel amounts,perceptions, affections,and desires

Using structural equation modeling, the relationships among travel amounts, perceptions, affections, and desires across five short-distance (one-way trips of less than 100 miles) travel categories (overall, commute, work/school-related, entertainment/social/recreation, and personal vehicle) are examined. The models are estimated using data collected in 1998 from more than 1300 working commuters in the San Francisco Bay Area. A cross-model analysis reveals three robust relationships, namely: (1) myriad measures of travel amounts work together to affect perceptions; (2) perceptions are consistently important in shaping desires; and (3) affections have a positive relationship with desires. The second finding suggests that two individuals who travel the same objective amount may not have the same desire to reduce their travel: how much individuals perceive their travel to be is important. The third point argues that the degree to which travel is enjoyed is a key determinant of shaping desires to reduce travel: the more travel is enjoyed, the less the desire to reduce it.     

解决铁路内燃机车增压器故障方案的探讨

通过对铁路内燃机车运用中发生的增压器故障情况进行了比较系统地分析，阐述了近期增压器故障增多的原因及增压器故障的种类、分布和可能引发的多种原因，并以此为依据提出了一些有利于改善目前这种情况的办法，为今后改善铁路内燃机车增压器的质量和管理起到借鉴作用。     

软土地区盾构隧道下穿铁路干线引起的线路沉降规律分析

软土地区盾构隧道下穿铁路干线引起的上方铁路线路沉降规律与一般情况下盾构推进引起的地面沉降规律有较大的不同。基于某地铁隧道工程实例,对隧道下穿铁路的施工期及其后续阶段的线路沉降进行观测。根据观测数据,从沉降发展的时间历程、施工各阶段沉降量所占比例和地面沉降槽的特征3个方面进行了分析研究。结果表明:此类工程的地表沉降规律特点主要是后续沉降量在总沉降量中所占比例相当大,并且其沉降达到稳定需要的时间远比通常情况要长,最终沉降量的大小几乎完全由后续沉降决定;此外,其沉降变形槽的深度和广度也更大,而且后推进的隧道上方沉降尤为显著。     

Hydrographic cruises off northwest Africa: the Canary Current and the Cape Ghir region

We present hydrographic data for several sections located along the African coastline and off Cape Ghir, carried out at times of weak surface winds (October 1995 and September 1997). The main sections are near the continental slope, at mean distances between 100 and 150 km from the coastline. North of Cape Ghir (31°N) the geostrophic transport (referenced to 650 m) of North Atlantic Central Water through these sections is 3.7 and 2.0 Sv for 1995 and 1997, respectively. This confirms that a major fraction of the water transport by the Canary Current flows east, into the continental slope off northwest Africa, at latitudes above Cape Ghir. Most of this flow continues south past Cape Ghir, along the coast and probably through the eastern passages of the Canary Archipelago. A significant fraction, however, may escape through surface Ekman transport (0.3–0.5 Sv during the early fall season) and by offshore flow at Cape Ghir (1.1 Sv in September 1997, referenced to 650 m). Despite the weak winds the Cape Ghir filament was clearly visible, characterized by localized coastal upwelling associated to a cyclonic shallow structure and cold (and fresh) waters stretching offshore as a very shallow feature (50–100 m deep). The satellite images show that the surface temperature field is highly variable, in rapid response to the surface winds, always with a core region of relatively cold water and commonly with one or two associated eddies. Our results support the existence of two recirculation cells in the area: a horizontal one that connects the interior eastern boundary currents with the coastal region and a vertical one related to both wind-induced and filament upwelling. The data also show a salinity subsurface maximum at the root of the filament, linked to water inflow from northern latitudes, and a subsurface anticyclonic eddy over the Agadir canyon, likely related to the poleward slope undercurrent.     

地铁制动试验台测控系统简介

介绍了地铁制动试验台的测试对象和其测控系统的组成与原理。     

Initial results from long-term measurements of atmospheric humidity and related parameters in the marine boundary layer at two locations in the Gulf of Mexico

Measurements of boundary layer moisture have been acquired from Rotronic MP-100 sensors deployed on two NDBC buoys in the northern Gulf of Mexico from June through November 1993. For one sensor, which was retrieved approximately 8 months after deployment, the post- and precalibrations agreed closely and fell well within WMO specifications for accuracy. The second sensor operated continuously from June 1993 to February 1997 (3.5 years). Buoy observations of relative humidity and supporting data were used to calculate specific humidity and the surface fluxes of latent and sensible heat. Specific humidities from the buoys were compared with observations of moisture obtained from nearby ship reports, and the correlations were generally high (0.7–0.9). Surface gravity wave spectra were also acquired. The time series of specific humidity and the other buoy parameters revealed three primary scales of variability, small (h), synoptic (days), and seasonal (months). The synoptic variability was clearly dominant and occurred primarily during September, October, and November. Most of the synoptic variability was due to frontal systems that dropped down into the Gulf of Mexico from the continental US followed by air masses which were cold and dry. Cross-correlation analyses of the buoy data indicated that: (1) the moisture field was highly coherent over distances of 800 km or more in the northern Gulf of Mexico; and (2) both specific humidity and air temperature served as tracers of the motion associated with propagating atmospheric disturbances. These correlation analyses also revealed that the prevailing weather systems generally entered the buoy domain from the South prior to September, but primarily from the North thereafter. Spectra of the various buoy parameters indicated strong diurnal and semidiurnal variability for barometric pressure and sea surface temperature (SST) and lesser variability for air temperature, wind speed and significant wave height. The surface fluxes of latent and sensible heat were dominated by the synoptic events which took place from September through November with the transfer of latent heat being primarily from the ocean to the atmosphere. Finally, an analysis of the surface wave observations from each buoy, which included calculations of wave age and estimates of surface roughness, indicate that major heat and moisture flux events coincide with periods of active wave growth, although the data were insufficient to identify any causal relationships.     

Transient characteristics of emissions during engine start/stop operation employing a conventional gasoline engine for HEV application

In this paper, we investigate the transient characteristics of combustion and emissions during engine start/stop operations in hybrid electric vehicle (HEV) applications. Hydrocarbon (HC) emissions during the initial 2^nd∼9^th cycles are found to be significantly greater when the engine is quickly started under the original engine calibration mode. Lower intake manifold absolute pressure (MAP) was also found to cause larger residual gas dilution and poor combustion, resulting in a higher HC concentration when the cranking speed was increased. The post-catalyst HC concentration was found in the way of initially decrease and then to increase again as the cranking speed was increased. A lowest concentration value was achieved at a cranking speed of 1000 r/min. Engine shut-down by fuel cut-off was shown to produce lower emissions than shut-down by ignition cut-off as one can avoid misfire of the last fuel injection cycle. The fuel deposited during the stop process seems to impact engine restart enrichment mostly during the initial 0.7 s for this engine, whose performance is dominated by the MAP transition characteristic and the time coefficient for fuel vaporization in this time period     

Optimized design for a MacPherson strut suspension with side load springs

Undesired lateral force inevitably exists in a MacPherson suspension system, which is liable to damper rod’s side wear and promotes the damper’s inner friction decreasing the ride performance from the suspension system. Substituting a new side load spring with curved centerline for the conventional coil spring has been proven able to solve these problems and Multi-body Dynamics combining with Finite Elements Analysis may be an efficient method in optimizing its design. Therefore, taking a passenger car as example, a detailed multi-body dynamics model for the suspension system is built to simulate forces exerted on the damper and the minimization of its lateral component is selected as the design target for the spring. When the structure optimization of the side load spring is performed using FEA software ANSYS, its vertical and lateral elastic characteristics, supported by test data, are analyzed. After importing FEA results back to the suspension system, the dynamics simulation can be performed to validate the optimization result.     

基于C8051F020单片机的T型管自动焊接机控制系统

为了提高T型管的焊接质量和效率,设计了一台用C8051F020单片机自动控制的焊接设备。同时采用C8051F020的12位A／D转换功能实现对焊接系统中加工参数的实时检测。该自动焊接系统在钢制散热器管道焊接生产应用中取得了良好的效果,是一种低成本、自动化的T型焊缝专用焊接设备。