Subjective well-being and travel: retrospect and prospect

Although the improvement of well-being is often an implicitly-assumed goal of many, if not most, public policies, the study of subjective well-being (SWB) and travel has so far been confined to a relatively small segment of the travel behavior community. Accordingly, one main purpose of this paper is to introduce a larger share of the community to some fundamental SWB-related concepts and their application in transportation research, with the goal of attracting others to this rewarding area of study. At the same time, however, I also hope to offer some useful reflections to those already working in this field. After discussing some basic issues of terminology and measurement of SWB, I present from the literature four conceptual models relating travel and subjective well-being. Following one of those models, I review five ways in which travel can influence well-being. I conclude by examining some challenges associated with assessing the impacts of travel on well-being, as well as challenges associated with applying what we learn to policy.

     

基于红外路径识别的智能车控制系统设计

介绍一种基于模拟式红外光电传感器路径识别的智能车控制系统,使用飞思卡尔公司16位单片机MC9S12DG128为核心控制单元,采集红外传感器信号智能分析导引线路径信息,自动控制舵机转向,并对智能车的直流驱动电机实现PID调速控制。     

刚架拱桥的检测与承载能力评定

对某缺失资料的刚架拱桥进行了病害调查、无损检测及荷载试验,重点对荷载试验进行了分析.通过对结构加载模拟分析、加载等级与方式的确定、变形和自振频率的实测与分析,表明该桥的承载能力不满足规定的荷载等级,且动力性能较差,需要进行加固维修.此方法为该类桥梁的维护使用和加固改造提供参考.     

既有铁路桥梁声屏障的高速列车脉动风致响应

采用SAP2000有限元软件,建立了既有桥梁声屏障的有限元模型,混凝土插板与H型钢立柱之间的连接采用位移和转角弹簧模拟.探讨了脉动力采用多点输入和一致输入,跨度16,24和32 m的铁路桥梁声屏障的动力响应,分析了声屏障的位移峰值、弯矩峰值和动力放大系数的分布特征.结果表明,常用跨度铁路桥梁声屏障的行波效应系数均小于1;声屏障立柱的位移和挑梁弯矩的最大值随桥梁跨度增大而减小;声屏障挑梁刚度过小,跨度16 m的铁路桥梁声屏障立柱的最大位移达15.5 mm.     

同相牵引供电系统平衡补偿的最优模型

为消除同相牵引供电系统中的三相不平衡、滤除谐波、补偿无功,讨论了平衡变换的两种最优补偿模型:以波形质量最优为目标的波形畸变最小模型和以获得最佳负载为目标的最佳负载模型.通过仿真分析了系统电压畸变时两种补偿模型的补偿效果.结果表明,波形畸变最小模型使系统只提供负载所需要的基波有功电流,最佳负载模型将不对称的单相负载变成三相(或两相或四相)对称纯阻性负载.在三相系统电压对称无谐波时,两者补偿特性一致;当三相系统电压不对称有谐波时,两者补偿特性有区别.     

苦参碱对人卵巢癌细胞增殖的影响及其机制

目的 研究苦参碱(matrine)体外培养的人卵巢癌细胞OV2008增殖的影响及相关机制.方法 采用四甲基偶氮唑蓝(MTT)比色法检测不同浓度(0、0.125、0.25、0.5、1.0,2.0、4.0 mg/mL)的苦参碱在不同的时间点(24、48、72 h)对OV2008细胞增殖的影响;采用流式细胞术(FCM)检测不同浓度的苦参碱作用于OV2008细胞48 h后细胞周期分布、凋亡率及Fas、Bcl-2蛋白的表达水平.结果 苦参碱对OV2008细胞的增殖具有明显的抑制作用,与对照组相比具有显著性差异(P<0.05或P<0.01),并呈现时间和剂量依赖性;细胞周期分析显示,随着苦参碱浓度的增高,G0/G1期细胞比例逐渐增加,S期细胞比例减小,G2/M期细胞比例无明显变化;苦参碱能够诱导细胞凋亡,且凋亡率随着苦参碱浓度的增高而升高(P<0.01);苦参碱能够上调Fas蛋白的表达(P<0.05或P<0.01),下调Bcl-2蛋白的表达(P<0.01).结论 苦参碱可显著抑制OV2008细胞的增殖,且抑制作用晕剂量和时间依赖性.苦参碱对OV2008细胞的增殖抑制作用可能与其诱导细胞周期阻滞及凋亡有关,而苦参碱诱导凋亡可能与其上调Fas蛋白表达、下调Bcl-2蛋白表达有关.     

在建盾构隧道突发管片破损病害成因分析及治理措施研究北大核心CSCD

盾构法广泛应用于我国城市轨道交通隧道的建设中,盾构管片的病害问题也越发受到重视。文章针对某地铁在建盾构隧道突发管片破损病害,绘制了管片破损病害展布图,分析了相关资料和检测数据,明确了病害的成因机理,制定并实施了相应治理措施。研究结果表明:管片背后大范围空洞导致围岩对隧道的约束不足,引起已成型隧道在盾构机反推力和扭矩、同步注浆浆液浮力、刀盘水土压力和扭矩等作用下发生类压杆弯扭失稳是导致该病害的主要原因;隧道变形监测数据表明"背后注浆填充+破损部位修复"两阶段治理措施取得了良好的治理效果;盾构隧道施工过程中,应严格管控同步注浆质量,防止隧道轴线偏移引起盾构管片发生开裂破损等病害。     

纤维增强复合材料拉伸破坏过程的Monte-Carlo模拟

基于剪切滞后模型,采用影响函数叠加方法,得到复合材料在多纤维断裂下的应力场,包含了基体和界面塑性变形的影响.考虑纤维强度的统计特性,结合Monte-Carlo方法模拟丫复合材料在拉伸载荷作用下的累计破坏过程.结果表明:复合材料拉伸强度的尺寸效应与纤维强度分布的统计性质以及微观损伤诱发的应力重分配有关.文中的研究为进一步发展基于破坏机理分析的复合材料在热/机械载荷作用下的疲劳寿命预测理论奠定了基础.     

松花江干流大顶子山航电枢纽工程库区蓄冰处理及枢纽导冰措施研究

通过实地调研、原型观测、现场实验等手段和方法对“水库冰冻对通航的影响问题及降低和消除影响措施已是目前急需解决的关键问题”进行了较系统的研究,提出了水库蓄冰处理及枢纽导冰措施方案,并在工程运行中得到验证,取得了预期的效果。     

On the numerical accuracy of the prediction of resistance coefficients in ship stern flow calculations

This article presents a study on the accuracy of the numerical determination of the friction and pressure resistance coefficients of ship hulls. The investigation was carried out for the KVLCC2 tanker at model- and full-scale Reynolds numbers. Gravity waves were neglected, i.e., we adopted the so-called double-model flow. Single-block grids with H–O topology were adopted for all the calculations. Three eddy viscosity models were employed: the one-equation eddy viscosity and the two-equation L $$" align="middle" border="0"> models proposed by Menter and the TNT version of the two-equation k-ω model. Verification exercises were performed in sets of nearly geometrically similar grids with different densities in the streamwise, normal, and girthwise directions. The friction and pressure resistance coefficients were calculated for different levels of the iterative error and for computational domains of different size. The results show that on the level of grid refinement used, it is possible to calculate the viscous resistance coefficients in H–O grids that do not match the ship contour with a numerical uncertainty of less than 1%. The differences between the predictions of different turbulence models were larger than the numerical uncertainty; however, these differences tended to decrease with increases in the Reynolds number. The pressure resistance was remarkably sensitive to domain size and far-field boundary conditions. Either a large domain or the application of a viscous–inviscid interaction procedure is needed for reliable results. This work was presented in part at the International Conference on Computational Methods in Marine Engineering—MARINE 2007, Barcelona, June 3–4, 2007.