Hub location with flow economies of scale

A characteristic feature of hub and spoke networks is the bundling of flows on the interhub links. This agglomeration of flows leads to reduced travel costs across the interhub links. Current models of hub location do not adequately model the scale economies of flow that accrue due to the agglomeration of flows. This paper shows that current hub location models, by assuming flow-independent costs, not only miscalculate total network cost, but may also erroneously select optimal hub locations and allocations. The model presented in this paper more explicitly models the scale economies that are generated on the interhub links and in doing so provides a more reliable model representation of the reality of hub and spoke networks.     

柔性桩与土相互作用非线性分析的增量传递矩阵法

对桩侧土采用非线性荷载传递函数,对桩端土采用线性荷载传递函数,同时考虑桩周土所分担的荷载对单桩荷载传递规律的影响,利用增量荷载传递矩阵法及微分方程的近似解法--子域法,推出了刚性承台下柔性桩与地基非线性相互作用的近似解析算式。为了验证该方法的可行性,通过试验将试验结果与有限元结果及该方法所得结果进行了对比,对比表明:该理论解与现场实测值、有限元计算值都非常接近。     

车辆折算系数的分类及算法

提出了标准车的选择原则:车长等于约定的长度;当交通流密度很小时,以道路设计速度行驶;驾驶员遵守交通规则。定义了微观车辆折算系数:交通流全部由标准车组成时的流量与交通流全部由某种车组成时的流量之比。定义了聚类车辆折算系数:组成该类车型的所有自然车的微观折算系数与组成比例的乘积之和。定义了宏观车辆折算系数:组成混合交通流的所有自然车的微观折算系数与组成比例的乘积之和。计算了这三种车辆折算系数。     

基于WebGIS车辆定位系统的设计

探讨了如何利用WebGIS技术实现在Internet环境下车辆定位中的应用,包括系统的组成、工作原理、短消息和WebGIS架构等内容,该设计方法是在微软最新的开发环境.Net和Mapinfo公司的MapX控件基础上开发实现的,详细解释了WebGIS架构和介绍了车辆定位系统的主要功能。系统的实现使用户可以直接在Internet环境下完成查询指定车辆的位置等相关信息,为智能交通的实现奠定了基础。     

柴油机曲轴有限元计算与台架试验数据对比分析

目前，国内柴油机行业普遍使用的曲轴弯曲疲劳强度试验台架，均采用音叉共振板结构。该试验台架对于大多数常规结构曲轴的连杆轴颈圆角疲劳强度的测定是比较准确的，但对于有些特殊结构曲轴的试验，却未能取得理想结果。以某曲轴台架试验、台架仿真模型及有限元计算模型数据为基础，分析对比了不同模型数据的差异及产生原因。     

大城市社会公共停车场选址规划模型研究

在考虑交通系统总体效益的基础上，采用数学分析的方法对社会公共停车场的规划布局进行定量分析，提出基于广义费用最小的最优社会公共停车场选址模型，以确定城市内社会公共停车场的合理布局，使城市交通系统总体效益达到最优。     

Fuzzy-logic applied to yaw moment control for vehicle stability

In this paper, we propose a new yaw moment control based on fuzzy logic to improve vehicle handling and stability. The advantages of fuzzy methods are their simplicity and their good performance in controlling non-linear systems. The developed controller generates the suitable yaw moment which is obtained from the difference of the brake forces between the front wheels so that the vehicle follows the target values of the yaw rate and the sideslip angle. The simulation results show the effectiveness of the proposed control method when the vehicle is subjected to different cornering steering manoeuvres such as change line and J-turn under different driving conditions (dry road and snow-covered).     

Target priority determination methods by interval-valued intuitionistic fuzzy sets with unknown attribute weights

The paper aims at the problem of multi-targets threat degree being hard to be evaluated accurately in complex air defense battlefield environments. Combined with multi-sensors information fusion and interval-valued intuitionistic fuzzy sets (IVIFS) theories, the target priority determination is studied. The score and accuracy functions of IVIFS are improved with thinking about the hesitating information in order to increase the rationality. Then, the influence factors of target priority and the nonlinear relationship between the influence factors and target priority are analyzed. Next, the algorithms for calculating the factor weights and sensor weights are given. Based on the theory of IVIFS and technique for order preference by similarity to an ideal solution (TOPSIS), two methods of target priority determination based on the IVIFS and TOPSIS are proposed. At last, an application example verifies the effectiveness and flexibility of the proposed algorithms.     

CeO2改性阴极扩散层对质子交换膜燃料电池性能的影响

采用水热法制备纳米CeO2空心球,以一定比例与碳粉、PTFE混合,经超声震荡后均匀喷涂在经疏水处理过的碳纸表面上形成微孔层.将改性扩散层与传统扩散层进行比较,通过扫描电子显微镜、能谱测试分析、接触角、接触电阻表征,扩散层的物理性能几乎不会改变.再将扩散层组装成单电池进行一系列的电池性能测试,结果表明:掺杂CeO2的阴极扩散层组装而成的单电池无论是电池性能、交流阻抗谱还是动态响应测试均优于传统扩散层组装的单电池.即证明了掺杂CeO2制备的改性阴极扩散层由于其储放氧功能,可以加速氧气传质,增加催化剂表面氧分压,进而提升PEMFC的单电池的动态响应性能.     

Effect of interference fits on the fatigue lives of bolted composite joints

The effect of interference fits on the fatigue lives of bolted composite joints is investigated by conducting mechanical tests. Static and fatigue tests are carried out on specimens made of carbon-bismaleimide composites joined together as double-lap single-bolt joints. The bolts having interference fits ranging of 0 (neat fit), 0.5%, 0.75% and 1% are performed. The results demonstrate the relationship between fatigue life and different values of interference fits. After the fatigue tests, non-destructive evaluation (NDE) and scanning electron microscope (SEM) are used to observe the damage of the surrender and surface of the hole. The test results show that the interference fitted specimens have improved fatigue life compared to the neat fitted specimen. The NDE and SEM results reveal that the damage degree of interference fitted specimen is weaker than that for the neat fitted one.