来曲唑与克罗米酚在诱导多囊卵巢综合征患者排卵中的作用

目的探讨来曲唑(LE)与克罗米酚(CC)在诱导多囊卵巢综合征(PCOS)患者排卵中的作用。方法选择在我院就诊的PCOS排卵障碍患者46例(58个周期),随机分为LE组和CC组,分别用LE、CC进行促排卵治疗,比较两组发育及成熟卵泡数、排卵数、平均卵泡直径、子宫内膜厚度及形态、排卵率、黄体化卵泡未破裂(LUF)的发生率及妊娠率。结果CC组发育和成熟卵泡数、注射绒毛膜促性腺激素(hCG)日及排卵后1周血清雌二醇浓度、LUF发生率较LE组显著升高(P<0.05),而注射hCG日子宫内膜厚度、子宫内膜三线征阳性率(A型%)显著低于LE组(P<0.05);两组血清孕酮浓度、排卵率及妊娠率无显著性差异。结论LE适合PCOS患者的诱导排卵治疗,有望作为PCOS患者的一线促排卵药物。     

肝移植术后糖尿病危险因素的分析

目的探讨肝移植术后糖尿病(PTDM)发生及发展的危险因素。方法回顾我院2005年1月至2006年12月间收治的66例肝移植受者的临床资料,对可能导致肝移植术后糖尿病的相关因素进行分析,筛选出在临床出现的高危因素。结果本组PTDM发生率为36%(24/66),多因素Logistic回归分析显示:术中腹水量、术中激素剂量、术后葡萄糖补充量、免疫抑制剂血药浓度、术后30 d内感染是肝移植术后发生糖尿病的高危因素。结论移植术后糖尿病是肝移植常见并发症之一,针对以上危险因素及早采取有效、合理的防治措施是减少PTDM的关键。     

The numerical friction line

This paper presents a study on the numerical calculation of the friction resistance coefficient of an infinitely thin plate as a function of the Reynolds number. Seven eddy-viscosity models have been selected: the one-equation turbulence models of Menter and Spalart–Allmaras; the k-ω two-equation model proposed by Wilcox and its TNT, BSL and SST variants and the two-equation model. The flow has been computed at 14 Reynolds numbers in sets of seven geometrically similar Cartesian grids to allow a reliable estimation of the numerical uncertainty. The effect of the computational domain size has been reduced to negligible levels (below the numerical uncertainty). And the same holds for the iterative and round-off errors. In the finest grids of each set, the numerical uncertainty of the friction resistance coefficient is always below 1%. Special attention has further been given to the solution behaviour in the laminar-to-turbulent transition region. Curve fits have been applied to the data obtained at the 14 Reynolds numbers and the numerical friction lines are compared with four proposals from the open literature: the 1957 ITTC line, the Schoenherr line and the lines suggested by Grigson and Katsui et al. The differences between the numerical friction lines obtained with the seven turbulence models are smaller than the differences between the four lines proposed in the open literature.     

New tension mechanism for high-speed tensile testing machine

As concerns of dynamic tensile measuring, a new tension mechanism driven by liner motor in high-speed tensile testing machine is presented. It satisfies the requirements for testing the dynamic tensile properties of plastic materials with strain rates from 1 to 100 s^-1, which is relatively difficult to test for currently available machines. For this purpose the idle stroke principle is used to realize the dynamic load of plastic material with static grip. Computer aided engineering is used: i) to analyze and optimize the tension mechanism thus allowing reducing the system shock caused by collisions. ii) to avoid the influence of plastic materials specimen stress and strain uniformity on the measuring system. The analysis results agreed well with the established empirical relationships based on experimental evidence. Two sets of experiments for different strain rate tensile were conducted thus allowing proving the reliability and credibility of the designed tension mechanism.     

Network reliability‐based optimal toll design

Optimal toll design from a network reliability point of view is addressed in this paper. Improving network reliability is proposed as a policy objective of road pricing. A reliability‐based optimal toll design model, where on the upper level network performance including travel time reliability is optimized, while on the lower level a dynamic user‐equilibrium is achieved, is presented. Road authorities aim to optimize network travel time reliability by setting tolls in a network design problem. Travelers are influenced by these tolls and make route and trip decisions by considering travel times and tolls. Network performance reliability is analyzed for a degradable network with elastic and fluctuated travel demand, which integrates reliability and uncertainty, dynamic network equilibrium models, and Monte Carlo methods. The proposed model is applied to a small hypothesized network for which optimal tolls are derived. The network travel time reliability is indeed improved after implementing optimal tolling system. Trips may have a somewhat higher, but more reliable, travel time.     

某输油管道刺漏调查分析

某输油管道在5天之内发生了2次泄漏事故,造成了巨大的经济损失。对两次泄漏事故和抢修过程进行了深入调查,对导致输油管道泄漏的各种原因进行了分析。依据管道刺漏形貌及位置,认为内壁腐蚀导致管道穿孔。对管道铺设轨迹进一步调查,研究结果表明管道两次刺漏位置均发生在低谷位置。认为密度较大的水等腐蚀介质容易在管道低谷位置积聚,其液面位置容易腐蚀。根据调查分析结果,对防止输油管道穿孔提出了建议。     

公路网的适应性评价

从定量和定性角度系统地阐述了公路网的适应性评价的方法,在定量评价中列举了6个对公路网进行评价的指标,并结合山东省公路网的具体情况,用这6个指标进行了相应的评价,得出结论。在定性评价中主要对公路网的结构性问题进行了探讨,为了更好地解决车辆超载对公路造成的破坏,提出了公路建设标准应进一步改进的建议。     

大型柔性管节预制过程中控制精度的选择

在沉管管节干舷值影响因素分析的基础上,结合国内沉管隧道的施工经验对某沉管隧道大型柔性管节的预制精度进行了推荐,并给出了预制精度方案下干舷值的变化范围,可为今后沉管隧道管节预制的设计和施工提供参考.     

基于面向对象技术的舰船综合电力系统电力网络故障模拟及拓扑跟踪

针对舰船综合电力系统电力网络结构特点,本文实现了基于面向对象技术的对舰船综合电力系统电力网络的拓扑建模。并针对电网故障的随机性特点,在面向对象环境中实现了对随机故障的模拟,同时用深度优先算法进行了快速的拓扑跟踪。算例分析证明了该方法的有效性。