塑料排水板在深海地基加固中的应用

塑料排水板作为陆上软土地基加固处理方法,应用较广泛,如公路路基、港(厂)区基础等地基处理工程。但作为海上地基加固由于受施工船舶、风浪、潮流、水深等多种因素限制,施工难度大,施工质量不易控制,尤其是在水深7—10m打设深度超过30m外海施工中,难度更加大,工程实例不多。结合洋山深水港区二期水工码头工程A标段的施工,介绍塑料排水板在深海地基加固中的应用,供同行参考。     

Minimization of Pedaling Induced Energy Losses in Off-road Bicycle Rear Suspension Systems

This paper presents the results of an optimization analysis performed on off-road bicycles in which the energy loss induced as a result of pedaling action was minimized. A previously developed computer-based dynamic system model (Wang and Hull, Vehicle System Dynamics, 25:3, 1996) was used to evaluate the power dissipated by a single pivot point rear suspension while pedalling uphill on a smooth surface. By systematically varying the location of the pivot point, the relationship between power dissipated and pivot location was determined. The optimal location was defined as the location which resulted in the least power dissipated. The simulation results show that the power dissipated was very dependent on the height above the bottom bracket but not the fore-aft location of the pivot point. If the pivot point is constrained to the seat tube, then the optimal pivot point was found to be 11 cm above the bottom bracket. Compared to a commercially available design, the optimal pivot point reduced the power dissipated from 6.9 to 1.2 Watts. Furthermore, the optimal pivot point was found to be very insensitive to pedaling mechanics, and both the spring and damping parameter values. The optimal pivot point did, however, have a linear dependence on the height of the chainline; as the chainline height increased so too did the optimal pivot point height.     

Minimizing the Path Radius of Curvature for Collision Avoidance

When a driver is suddenly presented with an obstacle in his path, or realizes that his speed is too great for the curved road ahead, commonly he saturates both inputs of steering and braking and thereby jeopardizes his chances of successfully avoiding a collision or negotiating the turn. Although anti-lock braking systems (ABS) avoid saturation of the braking and steerability usually remains, there is evidence to suggest that the vehicle performance with this system could be greatly improved. Could the steering, in addition to the braking, be automatically controlled to improve the performance? Because these threatening situations are so variable, it is very difficult to find a controller which can override both driver inputs and is always beneficial. Using a very simple model of the vehicle, the concept of minimizing the average radius of curvature of the path through controlling both driver inputs is shown to always be beneficial, and worthwhile. The results also carry over to a more realistic model.     

变频技术在锅炉自动燃烧控制系统中的应用

变频技术是近年来应用范围广泛的一门技术，尤其在节约电能、自动控制等方面更为突出。变频技术应用在锅炉的燃烧控制中，既节约了电能，又使燃烧充分而节约了燃煤。由于改变了传统控制模式的运行方式，使锅炉自动燃烧控制系统运行更稳定，安全可靠。该系统应用于青岛四方机车车辆厂、山海关桥梁厂、齐齐哈尔车辆厂、南口机务段等单位，经测试效果明显，推广价值很大。     

Addressing the joint occurrence of self-selection and simultaneity biases in the estimation of program effects based on cross-sectional observational surveys: case study of travel behavior effects in carsharing

Transportation - We estimate the effect of carsharing on travel behavior (specifically, household vehicle holdings, frequency of transit usage, and frequency of biking and walking) using data from...     

Representing heterogeneity in structural relationships among multiple choice variables using a latent segmentation approach

Transportation - Travel model systems often adopt a single decision structure that links several activity-travel choices together. The single decision structure is then used to predict...     

Modeling schedule recovery processes in transit operations for bus arrival time prediction

Many existing algorithms for bus arrival time prediction assume that buses travel at free‐flow speed in the absence of congestion. As a result, delay incurred at one stop would propagate to downstream stops at the same magnitude. In reality, skilled bus operators often constantly adjust their speeds to keep their bus on schedule. This paper formulates a Markov chain model for bus arrival time prediction that explicitly captures the behavior of bus operators in actively pursuing schedule recovery. The model exhibits some desirable properties in capturing the schedule recovery process. It guarantees provision of the schedule information if the probability of recovering from the current schedule deviation is sufficiently high. The proposed model can be embedded into a transit arrival time estimation model for transit information systems that use both real‐time and schedule information. It also has the potential to be used as a decision support tool to determine when dynamic or static information should be used.     

NUMERICAL MODEL OF THERMAL TRANSIENT EFFECT IN FIBER OPTIC GYRO

Ｎｏｍｅｎｃｌａｔｕｒｅｃｐ—Ｓｐｅｃｉｆｉｃｈｅａｔａｔｃｏｎｓｔａｎｔｐｒｅｓｓｕｒｅｃε１，ｃε２—ｋ－εｍｏｄｅｌｃｏｎｓｔａｎｔｓｇ—Ｇｒａｖｉｔａｔｉｏｎａｌａｃｃｅｌｅｒａｔｉｏｎｇｉ—Ｇｒａｖｉｔａｔｉｏｎａｌａｃｃｅｌｅｒａｔｉｏｎ...     

Primary productivity of the Palmer Long Term Ecological Research Area and the Southern Ocean

A major objective of the Palmer Long Term Ecological Research (Palmer LTER) project is to obtain a comprehensive understanding of the various components of the Antarctic marine ecosystem. Phytoplankton production plays a key role in this so-called high nutrient, low chlorophyll environment, and factors that regulate production include those that control cell growth (light, temperature, and nutrients) and those that control cell accumulation rate and hence population growth (water column stability, grazing, and sinking). Sea ice mediates several of these factors and frequently conditions the water column for a spring bloom which is characterized by a pulse of production restricted in both time and space. This study models the spatial and temporal variability of primary production within the Palmer LTER area west of the Antarctic Peninsula and discusses this production in the context of historical data for the Southern Ocean. Primary production for the Southern Ocean and the Palmer LTER area have been computed using both light-pigment production models [Smith, R.C., Bidigare, R.R., Prézelin, B.B., Baker, K.S., Brooks, J.M., 1987. Optical characterization of primary productivity across a coastal front. Mar. Biol. (96), 575–591; Bidigare, R.R., Smith, R.C., Baker, K.S., Marra, J., 1987. Oceanic primary production estimates from measurements of spectral irradiance and pigment concentrations. Global Biogeochem. Cycles (1), 171–186; Morel, A., Berthon, J.F., 1989. Surface pigments, algal biomass profiles and potential production of the euphotic layer—relationships reinvestigated in view of remote-sensing applications. Limnol. Oceanogr. (34), 1545–1562] and an ice edge production model [Nelson, D.M., Smith, W.O., 1986. Phytoplankton bloom dynamics of the western Ross Sea ice edge: II. Mesoscale cycling of nitrogen and silicon. Deep-Sea Res. (33), 1389–1412; Wilson, D.L., Smith, W.O., Nelson, D.M., 1986. Phytoplankton bloom dynamics of the Western Ross Sea ice edge: I. primary productivity and species-specific production. Deep-Sea Res., 33, 1375–1387; Smith, W.O., Nelson, D.M., 1986. Importance of ice edge phytoplankton production in the Southern Ocean. BioScience (36), 251–257]. Chlorophyll concentrations, total photosynthetically available radiation (PAR) and sea ice concentrations were derived from satellite data. These same parameters, in addition to hydrodynamic conditions, have also been determined from shipboard and Palmer Station observations during the LTER program. Model results are compared, sensitivity studies evaluated, and productivity of the Palmer LTER region is discussed in terms of its space time distribution, seasonal and interannual variability, and overall contribution to the marine ecology of the Southern Ocean.