A comparison of Chinese,Japanese, and Korean shipyard production technology

This paper compares Chinese, Korean, and Japanese shipyard production technology. Development in the world shipbuilding over recent years has influenced focus areas related to shipyard manufacturing technologies and product performance. Software systems, information technology, production technology, and local challenges of shipyards are compared with shipbuilding outputs among these three countries. Various technologies developments, shipyard production and the problems in Chinese, Japanese, and Korean shipyards are discussed respectively. Finally, future areas of research are pointed out.     

Development of Bayesian network models for risk-based ship design

In the past fifteen years, the attention of ship safety treatment as an objective rather than a constraint has started to sweep through the whole maritime industry. The risk-based ship design (RBD) methodology, advocating systematic integration of risk assessment within the conventional design process has started to takeoff. Despite this wide recognition and increasing popularity, important factors that could potentially undermine the quality of the results come from both quantitative and qualitative aspects during the risk assessment process. This paper details a promising solution by developing a formalized methodology for risk assessment through effective storing and processing of historical data combined with data generated through first-principle approaches. This method should help to generate appropriate risk models in the selected platform (Bayesian networks) which can be employed for decision making at design stage.     

Ship hull plate processing surface fairing with constraints based on B-spline

The problem of ship hull plate processing surface fairing with constraints based on B-spline is solved in this paper. The algorithm for B-spline curve fairing with constraints is one of the most common methods in plane curve fairing. The algorithm can be applied to global and local curve fairing. It can constrain the perturbation range of the control points and the shape variation of the curve, and get a better fairing result in plane curves. In this paper, a new fairing algorithm with constraints for curves and surfaces in space is presented. Then this method is applied to the experiments of ship hull plate processing surface. Finally numerical results are obtained to show the efficiency of this method.     

Numerical simulation of three-dimensional combustion flows

A finite-rate method is used to simulate the three-dimensional combustion process in a plasma generator with CH4 as the fuel. The simulation was run with RNG k-ε model to simulate turbulence, with eddy-dissipation-concept （EDC） model to simulate the combustion and with discrete ordinates model to simulate radiation. The numerical results show that the flow field characteristics and the parameter distributions are under the condition of rich fuels, and these results provide valuable information when optimizing the plasma generator design and organizing its flow fields.     

Fundamental research on resistance reduction of surface combatants due to stern flaps

It is well known that a decrease in ship resistance may be achieved due to the installation of a stern flap. Therefore, so far, a considerable amount of research on stern flaps has been conducted. Previous research has demonstrated that the primary mechanism by which a stern appendage reduces resistance is a change in the pressure distribution over the aft body of the hull, and secondly through effects on the running attitude, near and far field wave generation, and local transom flow among other phenomena. However, the change in pressure distribution is influenced by the other components. Hence, there is still room for argument about the relative contribution of each component to the pressure distribution. Therefore, as the first step of the research, by conducting the model experiment in towing tank and CFD (Computational Fluid Dynamics) analysis, we examined the effect of running attitudes and wave making at the after portion of the hull on resistance reduction. As a result, it is concluded that a flap affects a change in the wave generated at the transom part and it could lead to a decrease in wave-making resistance.     

Investigation of pitch motion portion in vertical response at sides of a Tension-Leg Platform

Tendons vertically moor Tension-Leg Platforms (TLPs), thus, a deep understanding of physical tendon stresses requires the determination of the total axial deformation of the tendons, which is a combination of the heave, pitch, and surging responses. The vertical motion of the lateral sides of the TLP is coupled with surge and constitutes a portion of the pitch motion. Tendons are connected to the sides of the TLP; hence, the total displacement of the lateral sides is related to the total deformation of the tendons and the total axial stress. Therefore, investigating the total vertical response at the sides of the TLP is essential. The coupling between various degrees of freedom is not considered in the Response Amplitude Operator (RAO). Therefore, in frequency domain analysis, the estimated vertical RAO is incomplete. Also, in the time domain, only the heave motion at the center of TLP is typically studied; this problem needs to be addressed. In this paper, we investigate the portion of the pitch motion in the vertical response at the sides of the TLP in both the frequency and time domains. Numerical results demonstrate a significant effect of the pitch motion in the vertical motion of the edges of the TLP in some period ranges.     

The UN’s 2030 Agenda for sustainable development and the maritime transport domain: the role and challenges of IMO and its stakeholders through a grounded theory perspective

In September 2015, the United Nations (UN) officially adopted the 2030 Agenda for Sustainable Development together with 17 sustainable development goals (SDGs) (UN, 2016). The attainment of the SDGs requires a strong commitment by all UN Member States, not least by the Member States at the International Maritime Organization (IMO). This empirical research aims to identify the role and challenges of stakeholders at IMO, when implementing the UN’s 2030 Agenda in the international maritime transport domain using a grounded theory approach. This paper describes the methodology and the analytical process undertaken and presents the main findings based on empirical data. The results are presented as a set of six propositions. The first proposition presents the phenomena engulfing Member States at IMO stemming out from lack of knowledge and policy incoherency on the 2030 Agenda at national level. The other five propositions suggest how these challenges could potentially be best alleviated through an IMO-led strategy on sustainable development within the context of the 2030 Agenda, supported by an appropriate governance structure that sees the introduction of strategic actors for coordinating the implementation of the SDGs at national level. With the support of a Task Force, and by also making use of the IMO Member State Audit Scheme (IMSAS), to create more awareness and ownership, the strategic actors could work towards balancing the three dimensions of sustainable development—the economic, the environmental, and the social dimensions—which were found to be imbalanced in the international maritime transport domain.     

混凝土斜拉桥双直立塔柱形索塔与下横梁异步施工控制

塔柱（内倾）是斜拉桥塔柱与下横梁异步施工的一个难点,结合双直立塔柱形索塔与下横梁异步施工工程实例,介绍了横向设置预偏的方法控制塔柱垂度。塔和下横梁异步施工中的塔偏通过考虑下塔柱与下横梁门式结构受力、混凝土收缩、下横梁预应力钢束锚下局部压缩,对塔柱节段施工设置预偏,塔柱（内倾）能够有效地控制塔偏。     

Application of the VOF method based on unstructured quadrilateral mesh

To simulate two-dimensional free-surface flows with complex boundaries directly and accurately, a novel VOF (Volume-of-fluid) method based on unstructured quadrilateral mesh is presented. Without introducing any complicated boundary treatment or artificial diffusion, this method treated curved boundaries directly by utilizing the inherent merit of unstructured mesh in fitting curves. The PLIC (Piecewise Linear Interface Calculation) method was adopted to obtain a second-order accurate linearized reconstruction approximation and the MLER (Modified Lagrangian-Eulerian Re-map) method was introduced to advect fluid volumes on unstructured mesh. Moreover, an analytical relation for the interface’s line constant vs. the volume clipped by the interface was developed so as to improve the method’s efficiency. To validate this method, a comprehensive series of large straining advection tests were performed. Numerical results provide convincing evidences for the method’s high volume conservative accuracy and second-order shape error convergence rate. Also, a dramatic improvement on computational accuracy over its unstructured triangular mesh counterpart is checked.     

希腊船东的融资之道

航运业是世界上资本最密集的行业之一,船舶投资占航运企业现金流的50%以上。一艘大型集装箱船、油船的造价动辄上亿美元,而一艘液化天然气船的造价更是昂贵。航运企业要扩大规模,提高国际竞争力,必须广拓融资渠道,筹集大量资金。作为全球第一航运大国,船舶融资对希腊航运业的发展至关重要。金融危机过后,融资环境的变化已经使得越来越多的希腊船东意识到资本市场融资的重要。那么,希腊船东是通过哪些渠道获取资金的呢？