A new channel allocation scheme for hierarchical wireless networks

A channel allocation scheme for hierarchical wireless networks was proposed in terms of the connection-level quality of service. The channel allocation scheme was analyzed using both horizontal channel borrowing and vertical traffic overflowing. Pre-emptive priority strategies are used to classify real-time services and non-real-time services, real-time service is given higher priority for it is allowed to pre-empt channels used by non-real-time service. Some channel borrowing thresholds and acceptance ratios are used to avoid channel locking or dynamic power control, which can also be dynamically adjusted according to network load. Simula-tion results show that the proposed schemes can improve the system performance.     

昆明市“月月无车日活动”及公众调查分析

调查了解公众对无车日活动常态化这一公共政策的反应,能够为城市交通政策的制定提供一定的技术参考。介绍了昆明市城市交通概况及首个无车日活动成效,同时,对“月月无车日活动”做了概述,在总结前几次活动经验的基础上,给出了活动的进一步调整方案。通过对无车日活动公众调查问卷的数据分析,得出大多数公众对“月月无车日活动”的态度是理解和支持的;在无车日当天,私人小汽车拥有者选择公共交通作为替代小汽车出行方式的比例最高。另外,大力发展公共交通也被受访者认为是解决城市交通拥堵应当首选的措施。     

扩频信号窄带干扰抑制技术及其仿真

从理论上研究了扩频通信系统的窄带干扰频域抑制技术和窄带干扰对消技术,在此基础上,对基带反馈双环对消电路进行了理论分析,对窄带干扰频域抑制技术和窄带干扰对消技术的综合系统进行仿真,并得出该系统可有效抑制扩频系统中的干扰噪声的结论．     

基于多传感器数据融合的目标分析

声场环境复杂,易引起单个声传感器所获得数据的不确定性,利用数据融合方法可以解决目标分析中信息的不确定性问题.文中建立了适合工程实用的基于多传感器数据融合的目标分析模型,利用该模型对三维情形下舰船通过过程进行了仿真.该方法的应用实现了对多传感器信息的优化利用,取得了较满意的结果,证明了模型的有效性.     

银杏叶提取物防治肝纤维化的实验研究

目的　探讨银杏叶提取物 (EGb)对慢性肝炎的防治作用及其机制。方法　SD大鼠随机分为正常组、模型组、EGb防治组和秋水仙碱组。用四氯化碳皮下注射法建立慢性肝损伤模型 ,分别用生理盐水或药物灌胃治疗。对比观察EGb对慢性肝损伤大鼠肝纤维化和脂质过氧化指标的影响 ,结合肝病理组织学及肝组织内Ⅰ、Ⅲ型胶原表达的变化加以探讨。结果　EGb防治组大鼠肝组织中PCⅢ、透明质酸、层黏连蛋白和CⅣ型胶原含量明显降低 ,血中过氧化物歧化酶、谷胱甘肽过氧化物酶活性明显升高 ,丙二醛含量明显降低 ,与模型组比较差异均有显著性意义 (P <0 .0 5或P <0 .0 1) ;形态学观察 ,EGb防治组大鼠肝组织损伤明显轻于模型对照组和秋水仙碱对照组 :HE染色显示肝组织炎症损伤减轻 ,VG染色显示肝组织纤维化程度明显减低 ,免疫组化染色显示肝组织中Ⅰ、Ⅲ型胶原表达明显减少。结论　EGb具有抑制脂质过氧化损伤 ,防治大鼠实验性肝纤维化的作用。     

EXPRESSION OF NESTIN AND GLIAL FIBRILLARY ACIDIC PROTEIN IN DIFFERENT PERIOD AFTER SPINAL INJURY IN ADULT RATS

Objective To study the expression of Nestin and glial fibrillary acidic protein (GFAP) in different period after spinal injury in adult rats. Methods Animal moels were created by artery clamp. Expression of Nestin and GFAP in different period ( 1,3,5days; 1-8 weeks) and different area( injury locus and its surrounding tissue ) after spinal injury were observed pathologicaly using immunofluorescence and LeicaQ5001W imaging processing system.Results There was expression of Nestin and GFAP in injured area 1 day after injury. The expression increased not only in in injured area but its sourrounding 3--7 days later and gradually got to peak value. As the time went on, expression of Nestin and GFAP dereased. Conclusion Spinal injury can induce the expression of Nestin. Nerve stem cell has response to spinal injury. There is positive correlation between expression of Nestin and hyperplasia of reactivity astrocyte. Nerve stem cell maybe invovled in the repair of central nervous system (CNS).     

基于名义应力法的动车组车体净水箱吊装部件疲劳强度分析

针对高速运行动车组车体悬挂设备振动疲劳损伤问题,以某型动车组车顶净水箱吊装结构为研究对象,采用名义应力法对吊装结构的焊缝部位进行疲劳强度评估.根据EN 12663标准确定净水箱的工作载荷工况,采用有限元法计算了各工况下结构的振动响应,并基于BS标准计算了焊缝疲劳评估点的寿命.假定各载荷工况出现频率相同的情况下,构造了工作载荷历程,采用Fe-safe软件对焊缝的疲劳寿命进行了仿真分析.两种方法分析结果均表明:焊缝1与焊缝2寿命最低,是结构最易发生疲劳破坏的位置;焊缝位于筋板表面的焊趾寿命低于位于主支撑板表面的焊趾寿命.     

Product Quality Evaluation Method Based on Product Gene Theory

Traditional quality inspection based product quality evaluation method with complex process has high operating cost and requires more professional knowledge. To remove the above limitation, this paper leads product gene theory into product quality evaluation. Methods of quality influencing factors based modeling and encoding are established. Combined with similarity theory and product gene theory, a product gene similarity analysis based quality evaluation method is proposed. The proposed method is low cost, operates easily and requires less specialized knowledge. A case study is conducted to prove the correctness and feasibility of this method.     

Structural Optimization of Hatch Cover Based on Bi-directional Evolutionary Structure Optimization and Surrogate Model Method

Weight reduction has attracted much attention among ship designers and ship owners. In the present work, based on an improved bi-directional evolutionary structural optimization (BESO) method and surrogate model method, we propose a hybrid optimization method for the structural design optimization of beam-plate structures, which covers three optimization levels: dimension optimization, topology optimization and section optimization. The objective of the proposed optimization method is to minimize the weight of design object under a group of constraints. The kernel optimization procedure (KOP) uses BESO to obtain the optimal topology from a ground structure. To deal with beam-plate structures, the traditional BESO method is improved by using cubic box as the unit cell instead of solid unit to construct periodic lattice structure. In the first optimization level, a series of ground structures are generated based on different dimensional parameter combinations, the KOP is performed to all the ground structures, the response surface model of optimal objective values and dimension parameters is created, and then the optimal dimension parameters can be obtained. In the second optimization level, the optimal topology is obtained by using the KOP according to the optimal dimension parameters. In the third optimization level, response surface method (RSM) is used to determine the section parameters. The proposed method is applied to a hatch cover structure design. The locations and shapes of all the structural members are determined from an oversized ground structure. The results show that the proposed method leads to a greater weight saving, compared with the original design and genetic algorithm (GA) based optimization results.     

Catalytic Combustion of Lean Methane Assisted by Electric Field over Pd/Co<Subscript>3</Subscript>O<Subscript>4</Subscript> Catalysts at Low Temperature

A series of Pd/Co₃O₄ catalysts were prepared by Self-Propagating High-Temperature Synthesis (SHS) method in this study, and electric field was applied for catalytic combustion of lean methane over Pd/Co₃O₄ catalysts at low temperature. When electric field was applied, the catalytic combustion performance of Pd/Co₃O₄ catalysts was greatly improved, and the application of electric field could reduce the load of active element Pd to some extent while maintaining the same efficiency. Based on experimental tests and the analysis results of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), H₂-temperature-programmed reduction (H₂-TPR) and in-situ diffuse reflectance infrared Fourier transform spectroscopy (in-situ DRIFTS), the mechanism of catalytic oxidation of CH₄ over Pd/Co₃O₄ catalysts in electric field was proposed. The catalytic combustion of CH₄ occurs only when the temperature is higher than 250 °C normally, but when electric field was applied, the whole process of CH₄ oxidation was promoted significantly and the reaction temperature was reduced. Electric field could promote the reduction of the support Co₃O₄ to release the lattice oxygen, resulting in the increase of PdO_x and the surface chemisorbed oxygen, which could provide more active sites for the low-temperature oxidation of CH₄. Furthermore, electric field could accelerate the dehydroxylation of CoOOH to further enhance the activity of the catalysts.