基于ANSYS的三通道储罐结构加固及修复技术

以一台三通道储罐为分析对象,此储罐在轻微压力环境下即发生了局部开裂。以ANSYS有限元方法为基础,通过在内部合理布置T型钢加强筋的方式进行结构加固。并在确保结构强度的前提下,计算出了板制T型钢厚度的最优解。自加固修复后,此三通道储罐已安全运行2 a以上,这种基于ANSYS的结构加固及修复技术,体现了良好的工程实用性和经济性。     

某型号制导电子箱的检测系统设计*

为解决现有导弹检测设备存在的缺陷,设计了一种模块化、通用化、智能化和标准化的综合检测修理平台。论文介绍了系统的硬件组成以及基于Labwindows／CVI的软件开发。通过部队实践证明,该系统具有重大军事效益和经济效益和广泛的运用前景。     

中国近周边海域船舶排放清单及排放特征研究

为分析我国沿海船舶大气污染物排放特征,本研究以船舶自动识别系统数据为基础,收集整理国内外船舶静态数据、排放参数,结合船舶实际航行资料,采用动力法估算了中国近周边海域2014年的船舶排放清单,并分析了靠港、锚泊、港内机动、低速、巡航5个船舶状态下的排放特征,按不同海区对排放进行了统计,并给出了我国三个排放控制区的船舶大气污染物排放情况。结果表明,中国近周边海域范围内由于船舶活动一年产生的硫氧化物、氮氧化物、PM10分别约为87.98万吨、137.84万吨、11.73万吨。排放源分析表明,在船舶的主机、辅机和锅炉3种排放源中,主机是主要排放源,且在航行状态上低速巡航状态排放最大。船舶排放污染物的空间分析表明,90%的船舶排放发生在海岸线至领海基线外96海里范围内,即距离陆地200公里的海域内。     

荷坳隧道四洞小净距段支护结构设计研究北大核心CSCD

多洞空间小净距隧道支护结构参数量化设计与安全性分析是当前设计中的一大难题。文章针对深圳机荷高速公路荷坳隧道四洞小净距段的设计,采用总安全系数法对四洞的开挖与支护模式、各洞的开挖顺序及支护参数进行了研究比较,并采用隧规荷载-结构法、增量法、地层-结构法对支护结构的安全系数进行了对比计算,得出以下结论:(1)提出了基于总安全系数法原理的多洞空间小净距隧道设计方法;(2)根据总安全系数法得出了荷坳隧道四洞小净距段应采用“先行洞二次衬砌完成后再开挖下一孔隧道”的开挖与支护模式,且应按洞1→洞2→洞3→洞4的开挖顺序施工;(3)隧规荷载-结构法、增量法、地层-结构法虽无法得出结构的总承载安全系数,但在一定程度上可以反应部分支护结构的安全性。     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Ridership drivers of bus rapid transit systems

We have collected information on 46 bus rapid transit (BRT) systems throughout the world to investigate the potential patronage drivers. From a large number of candidate explanatory variables (quantitative and qualitative), 11 sources of systematic variation are identified which have a statistically significant impact on daily passenger-trip numbers. These sources are fare, headway, the length of the BRT network, the number of corridors, average distance between stations; whether there is: an integrated network of routes and corridors, modal integration at BRT stations, pre-board fare collection and fare verification, quality control oversight from an independent agency, at-level boarding and alighting, as well as the location of BRT. The findings of this paper offer important insights into features of BRT systems that are positive contributors to growing patronage and hence should be taken into account in designing and planning BRT systems.     

采空区地层变形产生的隧道附加荷载及变形容许值计算与分析

文章分别计算了采空区上方地层弯曲时对隧道产生的附加荷载q1、q2及地层水平应变时对隧道产生的附加荷载qH,并推导出了采空区地层容许弯曲变形和水平应变数值.结果表明,现行交通部《采空区公路设计与施工技术细则》规定的采空区地基容许变形值较为笼统且偏大,结构偏于不安全.最后,文章根据计算结果对比,对不同围岩级别提出了更严格、更安全、更有针对性和可操作性的隧道对采空区地层变形限制要求,以供广大隧道工作者参考使用.     

浅析内河航道节能现状及技术应用

内河航道在施工建设和运营管理期间会产生大量的能源消耗,抓好航道的节能减排对发展绿色交通具有重要作用。本文总结概况了目前我国内河航道节能减排现状及采用的关键技术,相关技术的推广将引导交通运输行业优化用能结构、促进产业协调发展。     

火花塞离子电流研究进展

回顾了火花塞离子电流的产生机理和检测方法;介绍了离子电流的研究进展,包括发动机爆燃、失火、压力和空燃比的检测和测量,以及在空燃比和点火提前角控制中的应用和发展。可以看出,在汽车电控领域离子电流法较其他方法有着独特的优势,同时提出如何将离子信号从定性变为定量,如何利用自身的优势实现发动机的综合控制是离子电流未来研究的主要方向。     

三跨无背索斜拉桥的动力特性分析

湖南路大桥主桥为一座斜塔无背索斜拉桥,跨径组合为30 m+92 m+30 m,全长152 m。建立该桥空间有限元动力分析模型,重点研究该桥的自振频率和振型特征。通过与一座同类型方案桥的对比,总结出该桥动力特性及结构体系的主要特点,为后续同类桥梁的设计和相关研究提供借鉴。