A signal-based fault detection and classification method for heavy haul wagons

This paper proposes a signal-based fault detection and isolation (FDI) system for heavy haul wagons considering the special requirements of low cost and robustness. The sensor network of the proposed system consists of just two accelerometers mounted on the front left and rear right of the carbody. Seven fault indicators (FIs) are proposed based on the cross-correlation analyses of the sensor-collected acceleration signals. Bolster spring fault conditions are focused on in this paper, including two different levels (small faults and moderate faults) and two locations (faults in the left and right bolster springs of the first bogie). A fully detailed dynamic model of a typical 40t axle load heavy haul wagon is developed to evaluate the deterioration of dynamic behaviour under proposed fault conditions and demonstrate the detectability of the proposed FDI method. Even though the fault conditions considered in this paper did not deteriorate the wagon dynamic behaviour dramatically, the proposed FIs show great sensitivity to the bolster spring faults. The most effective and efficient FIs are chosen for fault detection and classification. Analysis results indicate that it is possible to detect changes in bolster stiffness of ±25% and identify the fault location.     

The Kalker book of tables for non-Hertzian contact of wheel and rail

A new regularisation of non-elliptical contact patches has been introduced, which enables building the look-up table called by us the Kalker book of tables for non-Hertzian contact (KBTNH), which is a fast creep force generator that can be used by multibody dynamics system simulation programs. The non-elliptical contact patch is regularised by a simple double-elliptical contact region (SDEC). The SDEC region is especially suitable for regularisation of contact patches obtained with approximate non-Hertzian methods for solving the normal contact problem of wheel and rail. The new regularisation is suitable for wheels and rails with any profiles, including worn profiles.

The paper describes the new procedure of regularisation of the non-elliptical contact patch, the structure of the Kalker book of tables, and parameterisation of the independent variables of the tables and creep forces.

A moderate volume Kalker book of tables for SDEC region suitable for simulation of modern running gears has been computed in co-simulation of Matlab and program CONTACT.

To access the creep forces of the Kalker book of tables, the linear interpolation has been applied.

The creep forces obtained from KBTNH have been compared to those obtained by program CONTACT and FASTSIM algorithm. FASTSIM has been applied on both the contact ellipse and the SDEC contact patch. The comparison shows that KBTNH is in good agreement with CONTACT for a wide range of creepage condition and shapes of the contact patch, whereas the use of FASTSIM on the elliptical patch and SDEC may lead to significant deviations from the reference CONTACT solutions.

The computational cost of calling creep forces from KBTNH has been estimated by comparing CPU time of FASTSIM and KBTNH. The KBTNH is 7.8–51 times faster than FASTSIM working on 36–256 discretisation elements, respectively.

In the example of application, the KBTNH has been applied for curving simulations and results compared with those obtained with the creep force generator employing the elliptical regularisation. The results significantly differ, especially in predicted creepages, because the elliptical regularisation neglects generation of the longitudinal creep force by spin creepage.     

小型直喷式柴油机燃用生物质能燃料的性能研究

文章主要研究了生物质能混合燃料在柴油机上的应用,通过在一台小型直喷式柴油机上进行不同组分柴油-生物柴油-乙醇混合燃料的燃烧、油耗和排放性能对比试验,分析了乙醇含量的改变对混合燃料的发动机燃烧压力、滞燃期、放热规律、比油耗和排放的影响．     

钢箱梁桥地震响应的有限元分析

针对典型的工程实例,基于大型有限元软件,采用纤维模型模拟梁柱单元,建立了钢箱梁桥的三维有限元模型,合理选取了强震记录,进行了罕遇地震作用下桥梁结构的弹塑性时程分析,为桥梁结构抗震设计和提高抗震安全性提供了科学依据和重要参考.     

昆明市“月月无车日活动”及公众调查分析

调查了解公众对无车日活动常态化这一公共政策的反应,能够为城市交通政策的制定提供一定的技术参考。介绍了昆明市城市交通概况及首个无车日活动成效,同时,对“月月无车日活动”做了概述,在总结前几次活动经验的基础上,给出了活动的进一步调整方案。通过对无车日活动公众调查问卷的数据分析,得出大多数公众对“月月无车日活动”的态度是理解和支持的;在无车日当天,私人小汽车拥有者选择公共交通作为替代小汽车出行方式的比例最高。另外,大力发展公共交通也被受访者认为是解决城市交通拥堵应当首选的措施。     

行人微观仿真中的运动模型与行为模型——STEPS与NOMAD模型对比

为了解各类行人仿真模型的性能差异和适用范围,以选取适当模型进行交通枢纽行人仿真,对两种典型行人仿真模型进行研究。依据模型对行人行为描述的复杂程度,将行人仿真模型分为运动模型、部分行为模型、行为模型3类,并分别介绍了各自的特点。选取典型的运动模型软件STEPS和行为模型软件NOMAD,详细探讨其采用的数学模型,并通过4个仿真实例对比分析这两种模型的特点。分析结果得出两种模型在宏观与微观层面的异同点以及存在的问题。     

公交通行能力约束的智能调度优化模型

公交通行能力是解决城市交通拥堵问题、促进城市公共交通系统高效运行的要素之一。介绍了公交通行能力的计算要素,并针对目前我国城市由于盲目调度造成的公交系统运营效率、服务水平下降的问题,提出将公交通行能力作为约束条件对公交调度进行优化。鉴于公交企业制订调度方案时需兼顾公交服务水平和企业效益,将智能调度的目标确定为候车时间满意度、候车空间满意度、车内舒适满意度和企业满意度加权平均值最大,并给出了相应的计算方法。最后讨论了利用遗传算法对模型进行求解的过程。     

纤维与沥青胶结料的抗拉拔性能评价

通过纤维拉拔试验来评价纤维与沥青胶结料的界面粘结强度,提出了拉拔过程中纤维与沥青胶结料相互作用的受力模型;利用此试验对聚酯纤维和芳纶纤维进行了试验研究,分析了影响界面粘结强度的主要因素,给出了沥青混合料中纤维的合理长度。     

高速公路景观设计初探

就高速公路景观设计进行了探讨.