重庆跨座式单轨1500V接触轨系统的安全管理

论述重庆跨座式单轨采用的直流1500V接触轨系统的构成、技术特征和在运营中的应用情况,介绍在采用直流1500V接触轨系统时的安全管理、安全防护措施。通过实践得出结论：在车辆段、地面正线等区域的使用中,尽管1500V接触轨系统比柔性架空网存在较高的触电风险,但如果运营公司高度重视,采取有效的隔离设计,以及强有力和细致的现场管理,就能够防范其带来的风险,确保运营安全。     

平地机施工时平整度的控制与施工工艺

以“二级公路”施工为分析点，对平地机的特点进行分析，对施工工艺加以总结，就如何提高平地机的使用效率，如何提高其施工过程的平整度，如何达到所规定的质量技术指标进行探讨。     

ERP在柴油机柔性装配线上的应用

介绍了自主开发的“ERP”系统,及与之匹配的“取货制”物流配送,解决了在一条柔性装配线上装配650种以上机型混装问题,实现了企业计划、定单、技术准备、财务、质量和制造等的核心业务的网络控制,提高了企业的整体竞争力。     

大塘水库段路堤设计方案选择及实施

结合潭邵高速公路大塘水库的实际情况，针对大塘水库段路堤设计方案进行分析比较，提出采用加筋土挡土墙的方案及方案实施工艺。加筋土挡土墙的墙面位移与沉降预测结果表明此方案技术是合理可行的。     

浅谈异型拱桥桥型设计

通过一个桥型方案设计实例 ,简要介绍异型拱桥的特点     

异形变截面多室曲线箱梁桥的试验研究及三维有限元分析

在对某异形变截面多室曲线箱梁桥试验研究的基础上,构造可以综合考虑拉压、弯扭、畸变、剪力滞及其耦合作用的三维虚拟层合单元法,并对该异形桥梁进行空间有限元分析。理论分析和试验研究表明,利用此法对这种复杂的异形桥梁结构进行空间分析,具有模型单元少、计算效率和精度高的特点,完全可以满足实际工程的需要,是一种简单方便的实用计算方法。最后,综合考虑在一期恒载和纵向预应力筋作用下其应力的空间分布情况。研究成果可供工程设计和施工参考。     

Study on dynamic characteristics of vehicle gearbox under multi-boundary conditions

With the development of vehicle gearbox to high-power-density and high-speed, how to predict and optimize the dynamic characteristics of vehicle gearbox becomes increasingly prominent. Aiming at the vehicle gearbox, this paper comprehensively and deeply studies the dynamic characteristics under the multi-boundary conditions. The generation mechanism of the multi-source excitations triggering the gearbox vibration is analyzed firstly. The vibration transfer path of the gearbox is explored. Secondly, the engine excitation, the gear meshing excitation and the bearing support load are numerically calculated. According to the finite element method, a fluid-solid coupling finite element model of the gearbox body is established to predict the gearbox dynamic responses based on the Galerkin method and the Hamiltonian variational principle. Finally, the effects of the excitation condition, oil height and reinforcement forms on the vibration responses of the gearbox body are thoroughly studied by simulation. The analysis indicates that it not only helps to modify and improve the method of forecasting the gearbox dynamic response, and also provides the theoretical and technical guidance for the gearbox design and optimization.     

复合驱动仿生胸鳍机构设计与水动力研究

针对仿鱼型海洋探测机器人低速时的机动性问题,受鹞鲼鱼类依靠胸鳍摆动实现各种水下运动的启发,设计出一种基于共融理论的复合驱动刚-柔多体耦合仿生鱼胸鳍机构。通过构建基于三维非定常湍流控制方程组的柔性鳍摆动系统水动力学模型,研究仿生胸鳍柔性鳍面摆动时周围压力和速度场的变化情况,分析不同摆动幅度和频率下鳍面的水动力学特性,揭示仿生鹞鲼机器鱼的水下运动机理,对摆动胸鳍的水动力进行仿真。结论表明:鳍面摆动时周围的漩涡能够引起胸鳍面上推力、升力及侧向力按类似正弦变化,而推进力和侧向力的大小随摆动幅值和摆动频率增加而增大。     

Novel experimental strategy for high resolution AFM imaging of membrane-associated bacterial toxins

Bacterial pore-forming toxins （PFTs） are essential virulence factors of many human pathogens. Knowl- edge of their structure within the membrane is critical for an understanding of their function in pathogenesis and for the development of useful therapy. Atomic force microscopy （AFM） has often been employed to structurally interrogate many membrane proteins, including PFTs, owing to its ability to produce sub-nanometer resolution images of samples under aqueous solution. However, an absolute prerequisite for AFM studies is that the samples are single-layered and closely-packed, which is frequently challenging with PFTs. Here, using the prototypical member of the cholesterol-dependent cytolysin family of PFTs, perfringolysin O （PFO）, as a test sample, we have developed a simple, highly robust method that routinely produces clean, closely-packed samples across the entire specimen surface. In this approach, we first use a small Teflon well to prepare the supported lipid bilayer, remove the sample from the well, and then directly apply the proteins to the bilayer. For reasons that are not clear, bilayer preparation in the Teflon well is essential. We anticipate that this simple method will prove widely useful for the preparation of similar samples, and thereby enable AFM imaging of the greatest range of bacterial PFTs to the highest possible resolution.     

Robust control for four-wheel-independent-steering electric vehicle with steer-by-wire system

A four-wheel-independent-steering (4WIS) electric vehicle (EV) with steer-by-wire (SBW) system is proposed in this paper. The fast terminal sliding mode controller (FTSMC) is designed for the SBW system to suppress external disturbances. Taking unstructured and structured uncertainties into consideration, a robust controller is designed for the 4WIS EV utilizing μ synthesis approach and the controller order reduction is implemented based on Hankel-Norm approximation. Since sideslip angle is the feedback signal of robust controller and it is hard to measure, the extended Kalman filter (EKF) is employed to estimate sideslip angle. To evaluate the vehicle performance with the designed control system, step and sinusoidal steering maneuvers are simulated and analyzed. Simulation results show that the designed control system have good tracking ability, strong robust stability and good robust performance to improve vehicle stability and handing performance.