基于捷联惯性系统的轨道长波不平顺检测

将航空航天飞行器制导中的捷联惯性系统应用于轨道长波不平顺的检测。利用四阶龙格-库塔法求解四元素姿态矩阵微分方程;采用积分滤波器对加速度信号进行二次积分,从而实时获取物体的运动轨迹。为提高系统的稳定性和抗噪性,在积分前利用小波变换对加速度信号进行去噪处理。最后采用XW-IMU5250惯性测量单元实测一个物体的运动,得到了物体精确的运动轨迹,通过对比不同时期测量结果即可得到轨道的长波不平顺信息。     

装配式桁架片组成的方柱式结构及承载力简化计算方法研究

装配式桁架在工程中运用较多,在工程项目中可以作为梁式结构和柱式结构运用,其中柱式结构分为排架式柱和方柱式结构。由于现实中对柱式结构缺乏完善的理论分析和实用简化计算方法,工程单位在运用柱式结构作为临时支撑结构过程中出现了不少安全隐患。因此对方柱式结构的构造及承载力简化计算方法进行研究,该实用计算方法简单,对方柱式结构运用具有一定指导作用和可操作性。     

重庆跨座式单轨1500V接触轨系统的安全管理

论述重庆跨座式单轨采用的直流1500V接触轨系统的构成、技术特征和在运营中的应用情况,介绍在采用直流1500V接触轨系统时的安全管理、安全防护措施。通过实践得出结论：在车辆段、地面正线等区域的使用中,尽管1500V接触轨系统比柔性架空网存在较高的触电风险,但如果运营公司高度重视,采取有效的隔离设计,以及强有力和细致的现场管理,就能够防范其带来的风险,确保运营安全。     

ERP在柴油机柔性装配线上的应用

介绍了自主开发的“ERP”系统,及与之匹配的“取货制”物流配送,解决了在一条柔性装配线上装配650种以上机型混装问题,实现了企业计划、定单、技术准备、财务、质量和制造等的核心业务的网络控制,提高了企业的整体竞争力。     

浅谈异型拱桥桥型设计

通过一个桥型方案设计实例 ,简要介绍异型拱桥的特点     

广义 k0 固结土的固结不排水剪总应力强度指标的确定

基于室内三轴剪切试验与天然土体的受力状态存在较大差异,从土的总应力强度指标与土的固结状态、初始固结状态、应力路径等之间的相关性出发,建立不同固结状态的土在不同试验条件下的总应力强度指标理论公式,并找出不同试验条件下的强度指标与室内常规三轴试验强度指标间的换算公式,进而解决了室内常规三轴试验在模拟天然土体的初始固结应力状态、加载路径等方面的不足.     

Study on dynamic characteristics of vehicle gearbox under multi-boundary conditions

With the development of vehicle gearbox to high-power-density and high-speed, how to predict and optimize the dynamic characteristics of vehicle gearbox becomes increasingly prominent. Aiming at the vehicle gearbox, this paper comprehensively and deeply studies the dynamic characteristics under the multi-boundary conditions. The generation mechanism of the multi-source excitations triggering the gearbox vibration is analyzed firstly. The vibration transfer path of the gearbox is explored. Secondly, the engine excitation, the gear meshing excitation and the bearing support load are numerically calculated. According to the finite element method, a fluid-solid coupling finite element model of the gearbox body is established to predict the gearbox dynamic responses based on the Galerkin method and the Hamiltonian variational principle. Finally, the effects of the excitation condition, oil height and reinforcement forms on the vibration responses of the gearbox body are thoroughly studied by simulation. The analysis indicates that it not only helps to modify and improve the method of forecasting the gearbox dynamic response, and also provides the theoretical and technical guidance for the gearbox design and optimization.     

复合驱动仿生胸鳍机构设计与水动力研究

针对仿鱼型海洋探测机器人低速时的机动性问题,受鹞鲼鱼类依靠胸鳍摆动实现各种水下运动的启发,设计出一种基于共融理论的复合驱动刚-柔多体耦合仿生鱼胸鳍机构。通过构建基于三维非定常湍流控制方程组的柔性鳍摆动系统水动力学模型,研究仿生胸鳍柔性鳍面摆动时周围压力和速度场的变化情况,分析不同摆动幅度和频率下鳍面的水动力学特性,揭示仿生鹞鲼机器鱼的水下运动机理,对摆动胸鳍的水动力进行仿真。结论表明:鳍面摆动时周围的漩涡能够引起胸鳍面上推力、升力及侧向力按类似正弦变化,而推进力和侧向力的大小随摆动幅值和摆动频率增加而增大。     

Novel experimental strategy for high resolution AFM imaging of membrane-associated bacterial toxins

Bacterial pore-forming toxins （PFTs） are essential virulence factors of many human pathogens. Knowl- edge of their structure within the membrane is critical for an understanding of their function in pathogenesis and for the development of useful therapy. Atomic force microscopy （AFM） has often been employed to structurally interrogate many membrane proteins, including PFTs, owing to its ability to produce sub-nanometer resolution images of samples under aqueous solution. However, an absolute prerequisite for AFM studies is that the samples are single-layered and closely-packed, which is frequently challenging with PFTs. Here, using the prototypical member of the cholesterol-dependent cytolysin family of PFTs, perfringolysin O （PFO）, as a test sample, we have developed a simple, highly robust method that routinely produces clean, closely-packed samples across the entire specimen surface. In this approach, we first use a small Teflon well to prepare the supported lipid bilayer, remove the sample from the well, and then directly apply the proteins to the bilayer. For reasons that are not clear, bilayer preparation in the Teflon well is essential. We anticipate that this simple method will prove widely useful for the preparation of similar samples, and thereby enable AFM imaging of the greatest range of bacterial PFTs to the highest possible resolution.     

Robust control for four-wheel-independent-steering electric vehicle with steer-by-wire system

A four-wheel-independent-steering (4WIS) electric vehicle (EV) with steer-by-wire (SBW) system is proposed in this paper. The fast terminal sliding mode controller (FTSMC) is designed for the SBW system to suppress external disturbances. Taking unstructured and structured uncertainties into consideration, a robust controller is designed for the 4WIS EV utilizing μ synthesis approach and the controller order reduction is implemented based on Hankel-Norm approximation. Since sideslip angle is the feedback signal of robust controller and it is hard to measure, the extended Kalman filter (EKF) is employed to estimate sideslip angle. To evaluate the vehicle performance with the designed control system, step and sinusoidal steering maneuvers are simulated and analyzed. Simulation results show that the designed control system have good tracking ability, strong robust stability and good robust performance to improve vehicle stability and handing performance.