Dynamic Interaction of Railway Train and Bridges

An analytical method for obtaining the dymanic responses of a train of locomotives moving on bridges is presented. The ratio of dynamic response to maximum static response is called the amplification factor, and its maximum absolute value minus one is called the impact. Each four-axle locomotive is modelled as a rigid body with three degrees of freedom: bounce, pitch and roll, and with a suspension system consisting of springs mounted on wheels. The locomotives are assumed to be connected by frictionless joints to form the train. The bridge is modelled as a three dimensional structure, with the masses lumped at the truss joints. All joints, including the floor beam connections, are assumed to be rigid, except those for the bracing members, which are assumed to be hinged. Vertical displacements are considered as the only dynamic degree of freedom. The mathematical formulation is described briefly, and a numerical example is given. Locomotive and truss member properties, together with stresses in some typical members, are given in the tables. The amplification factors of the responses in some typical bridge members are shown in the figures.     

高速铁路车辆车轴的疲劳设计方法(续)

3.4疲劳危险部位设计由于受车轴形状和疲劳磨损影响,压装部位(如轮座和制动盘座)的疲劳强度比其他平滑部位要小。为了提高压装部位的疲劳强度,采用了多种形状和材料的车轴进行统计测试。其压装部位的具体形状如图7所示。轮座和制动盘座处的车轴直径比平滑部位的要大,故采用了一     

Formation of Denmark Strait overflow water and its hydro-chemical composition

The dense overflow across the Denmark Strait is investigated with hydrographic and hydro-chemical data and the water mass composition of the Denmark Strait Overflow Water (DSOW) is determined by multivariate analysis. Hydrographical properties, the transient tracers CFC-11 and CFC-12, oxygen and nutrients are utilized for the water mass definitions. Distribution and characteristics of water masses north of Denmark Strait are described, the important water masses at the sill and the variability on weekly time-scales are discussed, and the entrainment and mixing of water into the overflow plume in the northern Irminger Basin is calculated. The analysis indicates that water masses both from the Nordic Seas and the Arctic Ocean are important for the formation of DSOW. It is found that water masses transported with the East Greenland Current make up about 75% of the overflow at the sill. The overflow at, and shortly south of, the sill is inhomogeneous with a low-salinity component dominated by Polar Intermediate Water. The high-salinity component of the overflow is mainly of Arctic origin. The water mass composition, and the short-term variability for 7 repeats of sections close to the sill are described, and these illustrate that the overflow is in fact a composite of a number of water masses with different formation and transport histories. This indicate that the overflow is a robust feature, but that it responds to variations in the circulation or atmospheric forcing that influences the formation of intermediate and deep water masses within the Arctic Mediterranean and the North Atlantic. At a section about 400 km south of the sill the overflow is well mixed and modified by entrainment of, mainly, Iceland–Scotland Overflow Water and Labrador Sea Water, together constituting 30% of the overflow plume. The entrainment of Middle Irminger Water dominates shortly downstream of the sill, before the overflow plume reaches too deep but the entrainment seems to be intermittent in time.     

A comparative study on the structural integrity of single and double side skin bulk carriers under collision damage

The primary aim of the present study is to investigate the collision resistance and residual strength of single side skin (SSS) and double side skin (DSS) bulk carriers subject to collision damage. The impact dynamics analyses were conducted using ANSYS LS-DYNA for the evaluation resistance forces, energy absorption and penetration depth for various collision scenarios. The struck vessels of Capsize SSS and DSS designs were assumed to be entirely standstill and the striking vessels of an Aframax-type oil tanker with different bulbous bow shapes were modeled as rigid bodies. The findings were compared, where possible, with existing analytical tools. Residual strength calculations on SSS and DSS vessels were computed corresponding to all considered collision damage scenarios. Traditional Smith's method was applied with the average stress — average strain relationships of elements based on derived semi - analytically. The effect of corrosion was also evaluated by Joint Bulker Project (JBP) Rules on the influence of plate and stiffener thickness. The safety of the vessels was determined as a ratio of the ultimate hull girder strength to bending moment in damaged condition. Finally, results and insights derived from the present work are summarized.     

The economics of port pricing

This short paper is concerned with the problem of improving the methods currently used to price port facilities. It presents a simple economic model of how an optimal pricing policy may be arrived at, employing an adaptation of an interactive supply-demand framework initially developed in the context of allocating car-parking places in urban areas. The model demonstrates the basic economic tenet that charges should be set equal to the full marginal social opportunity cost (M.S.O.C.) of facilities used, with premiums added where capacity restrictions would otherwise lead to excessive queueing. The use of a probability demand curve shows that one of the main fears of the anti-pricing school, namely excessive resource misallocation due to miscalcuations of the marginal cost, tends to be exaggerated. Further, it is argued that many of the other arguments set out against marginal cost pricing of ports are either ill-founded or unlikely to be of practical importance—ports are little different to other goods and services consumed in the economy and standard economic policies apply to them.     

The safety of ferries: an accident injury perspective

This study investigates determinants of fatal and non-fatal injuries in ferry vessel accidents. Poisson regression estimates indicate that fatal and non-fatal injuries are 3.35 and 4.46% higher for fire/explosion than for material/equipment failure or grounding accidents, and 3.13 and 3.38% higher for multi-vessel than for single-vessel accidents. Non-fatal injuries are higher when the weather is foggy but less at night and the older the ferry. Estimated marginal effects indicate that every 100 fire/explosion accidents result in 6.1 fatal injuries, while each fire/explosion accident results in approximately one non-fatal injury.     

An actuary method for the estimation and comparison of urban bus transit cost of services

This paper presents a new cost allocation method developed for estimating the fully-allocated costs of the excess peak hour bus transit service provided by two public transit systems. The estimates were produced for the explicit purpose of carrying out a realistic comparison of these costs and the costs of the potential provision of the same service by private operators. The method utilizes the same service data for the analysis. The pragmatic estimation of the fully allocated costs of service by the public and private sectors enables a more accurate estimation of potential cost savings. Sensitivity analysis was also performed using the same costing procedure to determine the range of cost savings that are feasible in a competitive contract arrangement of private sector providers. The new method separates costs of the direct provision of service from other indirect costs and thus facilitates the identification of each cost item and its significance in comparative cost estimates.     

A methodology for planning bus service

A methodology to assist transportation planners in designing bus services is developed. The methodology is most relevant for use in locations where bus service of the type being studied does not currently exist and therefore no information is available on past choice behavior, or in instances when transferability of travel models estimated in another location is difficult. The methodology assesses the sensitivity of bus service characteristics upon intended bus usage using survey data collected in Orange County, California, by the Orange County Transit District (OCTD). The methodology is based on a nonparametric statistical test developed by Kolmogorov and Smirnov.Scenarios describing hypothetical operations of bus service are presented to survey respondents who indicate their intended levels of bus usage under each situation. Significant differences between the response distributions associated with pairs of scenarios are identified and potential ridership levels, as bus operations become more favorable, are assessed. Various user segments are then identified on the basis of their levels of intended bus usage and the corresponding marketing implications associated with each segment are discussed.