Study on Mechanical Properties of Tunnel Lining Structure with Spray-applied Waterproofing Membrane北大核心CSCD

In order to study the influence of spray-applied waterproofing membrane layer on the mechanical properties of tunnel lining structure, a numerical calculation model of composite lining, spray-applied waterproofing lining and single-shell lining is established according to the mechanical parameters and interface parameters of waterproofing membrane measured by tests, and comparative analysis is made on the mechanical properties of the three types of lining structures. The research results show that: (1) compared with the composite lining, the stress of the secondary lining in the spray-applied waterproofing lining structure is significantly reduced, and the stress of the initial support has little change, but the displacement of both the initial support and the secondary lining increases; (2) in the spray-applied waterproofing lining structure, the whole section of the secondary lining is in the state of small eccentric compression, and the safety factor is greatly improved; (3) spray-applied waterproofing membrane layer can improve the cooperative force-bearing capacity of initial support and secondary lining, and improve the stress state of secondary lining, which is beneficial to improve the safety of secondary lining; and (4) with the increase of the cooperative force-bearing capacity of spray-applied waterproofing lining structure, the internal force of spray-applied waterproofing lining structure will be infinitely close to that of single-shell lining structure. © 2022, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Comparative analysis between operational weather prediction models and QuikSCAT wind data near the Galician coast

Wind measurements from SeaWinds scatterometer on the NASA QuikSCAT satellite and wind forecasts from two different operational numerical models provided by MeteoGalicia were compared for a 4-year period (2002–2005) in Galician coast environment. Available wind data buoy measurements were also used to complement the analysis. A statistical analysis based on mean errors, root mean square errors and complex correlation was performed from spatial, temporal and directional points of view.In the spatial comparison no significant differences between models and satellite were observed and the error magnitudes of the models are compatible with typical QuikSCAT errors. The suitability of satellite wind estimations for data assimilation in these models must be further investigated. Negative bias of models with respect to the satellite was also confirmed with buoy data, in such a way that models overestimation is smaller than the satellite one. Big errors in wind direction appear in southeasterly and southwesterly winds for both satellite and models, contributing to high RMSE values when compared to buoy data. These errors were mainly attributed to the effect of insufficient spatial resolution near shore.     

Hydrology, sediment yield, erosion and sedimentation rates in the estuarine environment of the Ria de Vigo, Galicia, Spain

The aim of this study is to provide a budget study with calculated erosion rates. Three methods have been used to calculate sediment yield and denudation rates in the Ria de Vigo: (1) measurements of sediment loads, (2) measurements of sediment accumulation rates at the coast, (3) theoretical calculations of potential denudation. Sediment loads and water discharge were measured over a period of 14 months from May 1997 to July 1998. Two of the tributaries entering the Ria de Vigo were monitored for 12 more months, from May 2000 to May 2001, to observe changes in discharge and sediment loads. This period corresponded with atypical precipitation, with peak monthly values (600 mm) three times higher than those on record.Water rating curves are typically exponential. Suspended and dissolved loads vary for different rivers, showing values of 1.5 to 130 mg/l during 1997/1998. For 2000/2001, these values are twice as high. Suspended load versus discharge relationships for 1997/1998 were logarithmic, but data from 2000/2001 does not fit the same equation. Dissolved loads are several times higher than suspended loads in almost all cases. Dissolved load concentrations vary more widely with discharge than suspended loads. This is probably due to local pollution and contamination from marine spray in areas closer to the sea.Second, erosion rates and bed load sediment yields were calculated from accumulation rates at the Ramallosa Complex. Well-preserved estuarine and tidal sediments, associated with the Minor River, have accumulated in this area during the Holocene. ¹⁴C ages allow calculation of sedimentation rates (SR) for two intervals. The lower interval extends from 2001 to 484 years BP and yields an SR of 1.12 mm/a. The upper interval extends from 484 years BP to the present and has an SR of 3.3–4.4 mm/a. These differences may be explained by basin dynamics as the beach progressively encloses the area and also by human interference. From sedimentary facies analysis it is concluded that 90% to 95% of the accumulated deposits were transferred to the basin as bed load. Muddy deposits (mostly marshes) are better developed at the upper part of the sediment pile, and inner areas, indicating a progressive shallowing and filling up of the basin. Most of suspended load is exported to the ria, whereas the Ramallosa Complex acts as a sediment sink for bed load derived material.Calculated potential erosion rates using Ahnert's [Am. J. Sci. 268 (1970) 243] equation show lower values than those estimated from river load concentrations. Potential erosion rates for the Minor River are higher than for the Lagares River which contrast with mechanical denudation rate values from river loads during 1997/1998 which are higher for the Lagares River. During 2000/2001 MDR values were higher than those of the potential erosion rates for both rivers, in line with the extremely high precipitation. Higher values in the Lagares could be in part due to human interference.     

The vertical disintegration of ship management: choice criteria for third party selection and evaluation

An assessment of the rationale for the vertical disintegration of ship management suggests that there might be compelling economic benefits for the separation of ownership from management. In this context, as a means for developing effective marketing strategies, it is important for ship managers to know the criteria used by current and prospective clients for ship manager selection and evaluation. The aim of this paper is to empirically identify the dimensions for ship manager selection and performance evaluation and their relative importance and to discuss the implications for marketing emanating from such an assessment. The methodology adopted includes the collection of secondary and primary data, both from ship managers and their clients, using interviews and a mail survey. The results indicate the prevailing importance of certain dimensions in selection (e.g. technical ability, reputation, competency) and evaluation (responsiveness, trustworthiness, technical ability), whereas it also found that price alone is not perceived to be as important in ship manager selection. It is concluded that placing emphasis on such dimensions in the formulation of a marketing strategy will contribute towards the attraction and retention of clients, whereas cost-cutting measures to allow price reduction, as well as advertising, will be ineffective over the long term.     

Resolving the impact of short-term variations in physical processes impacting on the spawning environment of eastern Baltic cod: application of a 3-D hydrodynamic model

Variations in oxygen conditions below the permanent halocline influence the ecosystem of the Baltic Sea through a number of mechanisms. In this study, we examine the effects of physical forcing on variations in the volume of deep oxygenated water suitable for reproductive success of central Baltic cod. Recent research has identified the importance of inflows of saline and oxygenated North Sea water into the Baltic Sea for the recruitment of Baltic cod. However, other processes have been suggested to modify this reproduction volume including variations in timing and volume of terrestrial runoff, variability of the solubility of oxygen due to variations in sea surface temperature as well as the influence of variations in wind stress. In order to examine the latter three mechanisms, we have performed simulations utilizing the Kiel Baltic Sea model for a period of a weak to moderate inflow of North Sea water into the Baltic, modifying wind stress, freshwater runoff and thermal inputs. The model is started from three-dimensional fields of temperature, salinity and oxygen obtained from a previous model run and forced by realistic atmospheric conditions. Results of this realistic reference run were compared to runs with modified meteorological forcing conditions and river runoff.From these simulations, it is apparent that processes other than major Baltic inflows have the potential to alter the reproduction volume of Baltic cod. Low near-surface air temperatures in the North Sea, the Skagerrak/Kattegat area and in the western Baltic influence the water mass properties (high oxygen solubility). Eastward oriented transports of these well-oxygenated highly saline water masses may have a significant positive impact on the Baltic cod reproduction volume in the Bornholm Basin.Finally, we analysed how large scale and local atmospheric forcing conditions are related to the identified major processes affecting the reproduction volume.     

罐车牵引梁失效容限分析全尺寸验证试验

介绍了用铁道车辆的全尺寸多轴液压伺服台－－模拟加载器，以及建立在裂纹分析方法基础上的失效容限分析，并以北美铁路摧车工业所承担的罐车牵引梁研究项目为例，采用模拟加载器来验证失效容限分析。     

Modelling the silica pump in the Permanently Open Ocean Zone of the Southern Ocean

A coupled 1D physical–biogeochemical model has been built to simulate the cycles of silicon and of nitrogen in the Indian sector of the Permanently Open Ocean Zone of the Southern Ocean. Based on a simplified trophic network, that includes two size classes of phytoplankton and of zooplankton, and a microbial loop, it has been calibrated by reference to surface physical, chemical and biological data sets collected at the KERFIX time-series station (50°40′S–68°25′E). The model correctly reproduces the high nutrient low chlorophyll features typical of the studied area. In a region where the spring–summer mixed layer depth is usually deeper than 60 m, the maximum of chlorophyll never exceeds 1.5 mg m⁻³, and the annual primary production is only 68 g C m⁻² year⁻¹. In the surface layer nitrate is never exhausted (range 27–23.5 mmoles m⁻³) while silicic acid shows strong seasonal variations (range 5–20 mmoles m⁻³). On an annual basis 71% of the primary production sustained by nanophytoplankton is grazed by microzooplankton. Compared to North Atlantic, siliceous microphytoplankton is mainly prevented from blooming because of an unfavourable spring–summer light-mixing regime. Silicic acid limitation (high half saturation constant for Si uptake: 8 mmoles m⁻³) also plays a major role on diatom growth. Mesozooplankton grazing pressure excerpts its influence especially in late spring. The model illustrates the efficiency of the silica pump in the Southern Ocean: up to 63% of the biogenic silica that has been synthetized in the photic layer is exported towards the deep ocean, while only 11% of the particulate organic nitrogen escapes recycling in the surface layer.     

La place des modèles de trafic dans les récentes modélisations des impacts environnementaux des transports. Importance de l’explicitation des méthodes et hypothèses

The authors present a recent development in the use of classic travel demand models (TDMs) to environmental impact assessment of transport, far from its initial target. By comparing previous cases found in the literature (Chester, Seoul, Florence, Brisbane and Saint-Etienne) with their present works (Eval-PDU in Nantes), the authors notice that their predecessors tend to be evasive on their use of TDM. Hence, traffic data are little discussed in these works, while their works constitute one of the main stakes in this kind of study. Indeed, the hypotheses for traffic modeling are impacting the next steps of the modeling chain (pollutants emission/dispersion). The importance of this first modeling stage implies that relevant attention has to be brought to their assumptions and input data.     

Locating new passenger facilities on a transportation network

This paper examines the problem of locating additional passenger facilities on a transportation network to supplement ones that already exist. A distinction is made between “supporting” facilities which operate only in concert with already existing ones and “new” facilities which are self-sufficient and operate independently. It is shown that, when the objective is to maximize the utility of travel times to all users, at least one set of optimal locations for the new facilities exist on the nodes of the network if the utility function for travel times is convex. This result is proven under very general conditions including the assumption of a probabilistic transportation network, i.e. a network where travel times on network branches are random variables. A straightforward algorithm for solving a specific simple case is also provided and the results are illustrated by examples.