Origin–destination table disaggregation using biproportional least squares estimation

This paper describes a group of techniques for disaggregating origin–destination tables for travel forecasting that makes explicit use of observed traffic on a network. Five models within the group are presented, each of which uses nonlinear least-squares estimation to obtain row and column factors for splitting trip totals from and to larger geographical areas into smaller ones. The techniques are philosophically similar to Fratar factoring, although the solution method is quite different. The techniques are tested on a full-sized network for Northfield, MN and are found to work effectively.     

压弯荷载作用下圆截面混凝土桩的损伤分析

运用Lem aitre损伤规律对土木工程中使用的混凝土圆截面桩受压弯荷载下进行损伤分析,推导了无量纲轴向力和无量纲弯矩的表达式,计算了不同失效应变对应的弯矩规律,以及不同失效应变和中性轴的无量纲位移之间的关系。分析结果可作为估算实际工程中混凝土圆截面桩抗弯承载力的参考依据。     

浅谈二手车及其鉴定评估方法

中国是世界上汽车产销量最大的国家,随着汽车存有量不断攀升、汽车消费文化的提升,汽车消费环境的不断优化,二手车的消费将会成为汽车消费的重要支撑,而在二手车消费的过程中,就需要对二手车的价值进行科学有效的评估。     

Influence of temperature on the tyre rolling resistance

Temperature is a very important factor controlling rolling resistance of road vehicle tyres. There are at least three different temperatures that may be considered as important factors controlling thermal conditions of the rolling tyre. The most common measure of the thermal conditions during tyre rolling is ambient air temperature. The other two are: pavement temperature and “tyre” temperature. Tyre temperature is the most difficult to establish, as temperatures of different parts of rolling tyres differ considerably, thus there is a problem to obtain representative values. In the authors’ opinion, air temperature is the most universal and reliable parameter to measure. The article presents results obtained in the Technical University of Gdańsk during laboratory and road measurements of different car tyres rolling on different pavements. The knowledge of rolling resistance characteristics is important for modelling car dynamics as well as fuel consumption. It is also necessary to establish proper test conditions in the future standardized on-road method of measuring rolling resistance. The results indicate that generally each tyre and pavement combination is influenced by the air temperature in a unique way, but at the same it is possible to propose some general influence factors that may be used to normalize measurements to the standard temperature of 25 °C.     

Wave propagation in head on bonnet impact: Material and design issues

Head on bonnet impact is becoming more and more important in automotive design as regulations on pedestrian safety become more demanding. Despite the relatively low amount of energy involved, these impacts are truly dynamic phenomena as the event duration is comparable with the traveling time of the different wavefronts generated by the impact. In this paper, we show that we can build up a simplified model for the impact based on wave propagation analysis. Using this model, we can analyze head acceleration on existing bonnets or predict it on new ones. Head acceleration in a bonnet impact can thus be estimated over the whole area of the bonnet with a few minutes of CPU.     

临时便桥的状态评估及相应养护工作探讨

由于临时便桥的工期短、造价低、施工简便等特点,使得桥梁施工质量难以得到保证.对临时便桥存在的普遍问题进行了阐述,探讨了相应的状态评估方法,指出了养护工作的重点,并将该方法成功应用到深圳机场立交便桥状态评估及养护工作中.     

灰色关联分析在供应商选择决策中的应用

针对供应商选择的评价指标，提出用灰色关联分析方法对供应商选择进行决策，并给出具体的计算方法和实例分析。     

Review of Secure Communication Approaches for In-Vehicle Network

In the connected vehicles, connecting interfaces bring threats to the vehicles and they can be hacked to impact the vehicles and drivers. Compared with traditional vehicles, connected vehicles require more information transfer. Sensor signals and critical data must be protected to ensure the cyber security of connected vehicles. The communications among ECUs, sensors, and gateways are connected by in-vehicle networks. This paper discussed the state-of-art techniques about secure communication for in-vehicle networks. First, the related concepts in automotive secure communication have been provided. Then we have compared and contrasted existing approaches for secure communication. We have analyzed the advantages/disadvantages of MAC and digital signatures for message authentication and compared the performance and limitations of different cryptographic algorithms. Firewall and intrusion detection system are introduced to protect the networks. The constraints and features of different intrusion detection approaches are presented. After that, the technical requirements for cryptographic mechanism and intrusion detection policy are concluded. Based on the review of current researches, the future development directions of the automotive network security have been discussed. The purpose of this paper is to review current techniques on automotive secure communication and suggest suitable secure approaches to implement on the in-vehicle networks.     

浅谈沥青混合料路面接缝的施工方法

根据施工经验介绍了沥青混合料路面接缝的施工方法.     

泡沫沥青冷再生施工技术节能减排效益分析

泡沫沥青冷再生施工作为一种路面废旧材料再生利用新型冷再生技术,其混合料除了具有良好的路用性能,施工中还可以起到明显的节能减排作用,是发展循环经济、创建环境友好节约型社会的重要举措,目前已开始得到应用和推广;通过对泡沫沥青冷再生施工技术节能效益分析,了解其节约资源、保护环境、减少污染、降低造价等优点。