Policy considerations for wetland wastewater treatment in the coastal zone: A case study for Louisiana

Two major environmental problems currently affecting the Louisiana coastal zone are a high rate of wetland loss and high levels of surface water pollution. The application of secondarily treated wastewater to wetlands can be a means of dealing with both of these problems. The benefits of wetland wastewater treatment include improved surface water quality, increased accretion rates to balance a high relative water level rise due mainly to subsidence, improved plant productivity and habitat quality, and decreased capital outlays for conventional engineering treatment systems. Wetland treatment systems can, therefore, be designed and operated to restore deteriorating wetlands. Hydrologically altered wetlands, which are common in the Louisiana coastal zone, are appropriate for receiving municipal and some types of industrial effluent. While the U.S. Environmental Protection Agency has determined wetland wastewater treatment is effective in treating municipal effluent, it has discouraged the use of natural wetlands for this purpose. At the same time, funds are being used for the construction of artificial wetlands to treat municipal effluent. In the Louisiana coastal zone, however, wetlands are deteriorating and disappearing due to hydrological alteration and a high rate of relative sea level rise. If no action is taken, these trends will continue. Effluent discharge to existing wetlands should be incorporated into a comprehensive management plan designed to increase sediment and nutrient input into subsiding wetlands in the Louisiana coastal zone, improve water quality, and result in more economical waste‐water treatment. The authors believe that the Louisiana example serves as a model for other coastal areas especially in light of projections of accelerated sea level rise.     

The impact of job assignment rules for straddle carriers on the throughput of container terminals

Straddle carriers represent a critical resource in the handling of containers within a container terminal. It is essential that they are deployed in an as efficient manner as possible. The research presented in this paper is motivated by the need to critically evaluate job assignment rules for straddle carriers that operate in a multiple straddle environment. This is achieved by developing a discrete event simulation model using industrial simulation software to model a container terminal located in Melbourne, Australia. The model accounts for variables such as the number of straddle carriers needed, the speed of straddle carriers, the arrival rate of trucks, and the job assignment rule. A principal finding of the study is that increasing the number of straddles in the present set‐up from 6 to 7 has a negligible effect on daily throughput. However, an increase in the number of straddles to 7 is expected to have a profound effect on reducing the average waiting time of trucks within the terminal from over 16 minutes to under 9 minutes, a decrease of 46.5%. However, a further increase in the number of straddles results in no further increase in daily throughput. It was observed that the throughput of the terminal is very sensitive to the speeds at which straddles travel. The management of the terminal has proposed a new heuristic job assignment rule for straddles, because the present rule does not assign the jobs to straddles closest to the truck requesting to load or unload a container. As a result a new heuristic job assignment rule was tested. The simulation results revealed that both the old and new rules performed equally well using performance indicators such as average container flow time, daily throughput, average waiting time of jobs, number of jobs in the queue, and straddle utilisation. Therefore, the new rule will not improve these performance measures if implemented     

In-car power line communications: Advanced transmission techniques

The increasing number of electronic control units (ECUs) inside a vehicle implies the need to develop and deploy on board robust, low latency and low complex telecommunication systems. In this respect, power line communications (PLC) is an attractive solution. The benefits provided by the introduction of power line communications in the in-car environment are multiple and they are related to the possibility of exploiting the existing and capillary wiring infrastructure to simplify the design of the in-vehicle data network (IVN) and, more importantly, to save weight and cost of the wiring harness. In this paper, we deal with the analysis of the performance achievable by applying innovative advanced modulation techniques to in-car measured power line channels, i.e., multicarrier (MC) and impulsive ultra wideband (I-UWB) modulation. We show that for low speed command and control applications, I-UWB is suitable since it requires lower power and lower computational efforts w.r.t. MC systems. Furthermore, we study the design of the optimal transmitted pulse to further improve the performance of I-UWB.     

T��l��phoner au volant : impact sur la conduite et risque d��accident, une revue de la litt��rature

This paper gives a literature review from experimental, epidemiological and naturalistic studies, having tried to measure on the one hand, the impact of mobile phone use on driving and, on the other hand, the risk of accident associated with this practice. The overview of these studies allowed first of all to show that the driving task is altered during the period of mobile phone use, and to quantify the disturbance (experimental studies), then to verify that this disturbance can be at the origin of accidents and quantify this risk (epidemiological studies). The naturalistic studies, consisting in following-up fleet vehicles, give some more explanations and tend to confirm the results. Advantages and limits of each approach are also discussed.     

Nutrient cycling and primary production in the marine systems of the Arctic and Antarctic

Primary production events in both the Arctic and the Antarctic are highly localized. Carbon-14 incubations that did not account for this caused antarctic primary production estimates to be revised too far downwards from the historic view of high productivity. The primary production regime in the Arctic is even more heterogeneous than in the Antarctic. Arctic primary production rates are in the process of being revised upwards because of a better spatial and temporal distribution of incubation experiments and a re-awakening of interest in estimating new production from the distribution of chemical variables. Similarly, recent examination of temporal changes in nitrate concentrations and recognition of the importance of ice-edge blooms has caused antarctic primary productivity to be revised upwards. In both the Arctic and the Antarctic, the ratio of “new” to total primary production is high, and neglect of this fact can lead to an underestimation of the potential that these regions have for influencing global cycles of bioactive chemicals. Some recent data on temporal changes in nitrate from Fram Strait emphasize the poor state of our knowledge by suggesting an unexpectedly high “new” production rate of 1 g C m⁻² d⁻¹ for a 35 day experiment that encountered an early Phaeocystis bloom. Chemical distributions suggest that new production over the shelf seas that border the Polar Basin is about 50 g Cm⁻² yr⁻¹.The shelves in the Arctic Ocean's marginal and adjacent seas comprise 25% of the total global continental shelf. These extensive shallow regions have much higher rates of primary production than the Polar Basin and may be globally significant sites of denitrification. Globally significant silica deposition could occur on these shelves or on the adjacent slopes.Because of the differences in geomorphology and stratification, global warming is likely to increase primary production in the Arctic and will probably decrease antarctic primary production.In addition to sharing high ratios of “new” to total primary production, high ammonium concentrations occur in the Arctic and Antarctic. It is possible that these accumulations arise from a strong repression of nitrification at low temperatures.     

Highway expenditures and non-metropolitan employment

Using data on state highway expenditures and employment from 30 Minnesota non-metropolitan counties over a 25-year period, possible interactions between transportation and employment are investigated. While crosssectional analysis suggests no significant interactions, causality tests and time-series analyses indicate that highway expenditures affect manufacturing and retail employment, and employment influences expenditures. Although expenditure increases cause employment improvements in the short-term, long-term effects are less favorable. Highway expenditures respond quickly to increased needs caused by retail improvements.     

Performance Index for a Preview Active Suspension Applied to a Quarter-Car Model

A simple and convenient matrix expression is derived for the performance index in the case of a linear vehicle model with two degrees of freedom and a preview active suspension, subject to a unit step road input and employing optimal control. The usual quadratic integral-type performance index is assumed and the effect of an additional form of constraint is described briefly. The effects of preview time on the performance index and the optimal feed-forward control are illustrated graphically for a particular example.     

A generalized model of pelagic biogeochemistry for the global ocean ecosystem. Part II: Numerical simulations

This paper presents a global ocean implementation of a multi-component model of marine pelagic biogeochemistry coupled on-line with an ocean general circulation model forced with climatological surface fields (PELAgic biogeochemistry for Global Ocean Simulations, PELAGOS). The final objective is the inclusion of this model as a component in an Earth System model for climate studies. The pelagic model is based on a functional stoichiometric representation of marine biogeochemical cycles and allows simulating the dynamics of C, N, P, Si, O and Fe taking into account the variation of their elemental ratios in the functional groups. The model also includes a parameterization of variable chlorophyll/carbon ratio in phytoplankton, carrying chl as a prognostic variable. The first part of the paper analyzes the contribution of non-local advective–diffusive terms and local vertical processes to the simulated chl distributions. The comparison of the three experiments shows that the mean chl distribution at higher latitudes is largely determined by mixing processes, while vertical advection controls the distribution in the equatorial upwelling regions. Horizontal advective and diffusive processes are necessary mechanisms for the shape of chl distribution in the sub-tropical Pacific. In the second part, the results have been compared with existing datasets of satellite-derived chlorophyll, surface nutrients, estimates of phytoplankton community composition and primary production data. The agreement is reasonable both in terms of the spatial distribution of annual means and of the seasonal variability in different dynamical oceanographic regions. Results indicate that some of the model biases in chl and surface nutrients distributions can be related to deficiencies in the simulation of physical processes such as advection and mixing. Other discrepancies are attributed to inadequate parameterizations of phytoplankton functional groups. The model has skill in reproducing the overall distribution of large and small phytoplankton but tends to underestimate diatoms in the northern higher latitudes and overestimate nanophytoplankton with respect to picoautotrophs in oligotrophic regions. The performance of the model is discussed in the context of its use in climate studies and an approach for improving the parameterization of functional groups in deterministic models is outlined.