Comparing Fisher Interviews,Logbooks, and Catch Landings Estimates of Extraction Rates in a Small-Scale Fishery

Researchers are turning to alternative data sources (e.g., resource user knowledge) to provide information required for wildlife management. Little is known about the reliability of data elicited from resource users relative to data obtained from user-independent approaches (e.g., observations of fish catches). We test for consensus among three methods that quantify past (1996 to 2007) seahorse catch-per-unit-effort (CPUE) for a small-scale, data-poor fishery in the Philippines: interviews with fishers about good, bad, and typical catch; fisher logbooks; and observations of catch landings. Interviews and logbooks indicated no trends in CPUE through time, consistent with results from the fisher-independent metric, catch landings. Although interview estimates of “typical” CPUE greatly exceeded “typical” observed catches and logbook estimates, interview estimates of “bad” CPUE were comparable. Catch landings estimates for a fisher in a particular year were uncorrelated to what he reported during retrospective interviews. Interviews should be used cautiously to inform specific catch targets (e.g., total allowable catches), although including interview questions about a range of catch experiences (e.g., good, bad and typical), may improve interview-derived data. Logbooks are particularly useful for capturing information about fishing expeditions that produce no fish, which are largely missed by other methods.     

Service quality,satisfaction and behavioral intentions towards public transport from the point of view of private vehicle users

Transportation - In order to attract car users towards the public transport services in an urban and metropolitan context, contributing to a sustainable mobility in cities, it is fundamental to...     

Improved hot-stamping analysis of tubular boron steel with direct measurement of heat convection coefficient

There are two types of hot-stamping processes, direct and indirect, depending on the sequence of the heating, forming, and quenching steps and the method used for each step. In this study, an indirect hot-stamping process consisting of forming at room temperature, heating, and water quenching was applied to develop a coupled torsion beam axle. The analysis results indicated that the application of the heat convection coefficient is critical in the simulations and must take into account the temperature and specific location in the model to ensure the accuracy of the heating and quenching analysis. The heat convection coefficients used in the analysis were directly measured at various positions of the tube (e.g., outside, inside, and bending region) using thermocouples, and the final values were determined through correlation between the actual tests and numerical analysis. The experimental and simulated final deformed shape and temperature distribution were in good agreement.     

Investigation of thermal stratification effect on n-Heptane/iso-Octane-Air mixture HCCI combustion

The HCCI combustion mode poses its own set of narrow engine operating by knocking. In order to solve this, inhomogeneity method of mixture and temperature is suggested. The purpose of this research is to get fundamental knowledge about the effect of thermal stratification on HCCI combustion of n-Heptane/iso-Octane-Air mixture. The temperature stratification is made by buoyancy effect in combustion chamber of RCM. The analysis items are pressure, temperature of incylinder gas and combustion duration. In addition, the structure of flames using the two dimensional chemiluminescence’s images by a framing camera are analyzed. Under stratification, the LTR starting time and the HTR starting time are advanced than that of homogeneous. Further, the LTR period of homogeneous conditions became shorter than that of the stratified conditions. With the case of homogeneous condition, the luminosity duration becomes shorter than the case of stratified condition. Additionally, under stratified condition, the brightest luminosity intensity is delayed longer than at homogeneous condition.     

Design of 2-speed transmission for electric commercial vehicle

As environmental and economic interests increase, the need for eco-friendly vehicle such as an electric vehicle (EV) has increased rapidly. Various research of enhancing EV powertrain efficiency and relibility have been studied. In this study, 2-speed shift gears mechanism is designed by using simpson type planetary gear train. This transmission has two planetary gear unit. Gear position is determinded by which ring gear is fixed. Internal components of the transmission are designed for satisfying the required specification of EV. We analyze gear strength, gear mesh efficiency, and transmission efficiency. By manufacturing the transmission prototype and performing some experiments, we verify the application suitability of this transmission.     

Robust design optimization of suspension system by using target cascading method

This study presents the robust design optimization process of suspension system for improving vehicle dynamic performance (ride comfort, handling stability). The proposed design method is so called target cascading method where the design target of the system is cascaded from a vehicle level to a suspension system level. To formalize the proposed method in the view of design process, the design problem structure of suspension system is defined as a (hierarchical) multilevel design optimization, and the design problem for each level is solved using the robust design optimization technique based on a meta-model. Then, In order to verify the proposed design concept, it designed suspension system. For the vehicle level, 44 random variables with 3% of coefficient of variance (COV) were selected and the proposed design process solved the problem by using only 88 exact analyses that included 49 analyses for the initial meta-model and 39 analyses for SAO. For the suspension level, 54 random variables with 10% of COV were selected and the optimal designs solved the problem by using only 168 exact analyses for the front suspension system. Furthermore, 73 random variables with 10% of COV were selected and optimal designs solved the problem by using only 252 exact analyses for the rear suspension system. In order to compare the vehicle dynamic performance between the optimal design model and the initial design model, the ride comfort and the handling stability was analyzed and found to be improved by 16% and by 37%, respectively. This result proves that the suggested design method of suspension system is effective and systematic.     

Productivity change in Nigerian seaports after reform: a Malmquist productivity index decomposition approach

ABSTRACT

During the 1990s, Nigerian seaports were considered inefficient, unsafe due to massive cargo theft (wharf rat phenomenon) and one of the most expensive port systems in the world. This resulted in long turnaround times for ships and increased container dwell times. As a result, port operations were transferred to the private sector through concession contracts. This paper employs a Malmquist productivity index (MPI) technique to benchmark pre-and post-reform total factor productivity growth of the six major Nigeria seaports (Apapa, Calabar, Onne, Port Harcourt, TinCan Island and Warri) for the period 2000–2011 which represents six years before (2000–2005) and six years after (2006–2011) the reform. The results indicate progress in technical efficiency of the ports after reform but deterioration in technological progress. Overall productivity growth was higher in the pre-concession period compared to the post-concession period. The source of pre-concession period productivity growth was technological progress while the change in productivity of the post-concession period is generated by an increase in scale efficiency. This suggests that concessionaires have not brought in the much anticipated investment in modern technology to drive port efficiency. The ports of Calabar and Apapa experienced the highest productivity growth while lowest result was Onne.     

A Review of Beach Bye-Law Usage in Supporting Coastal Management in Ireland

Coastal areas are commonly the focus of a range of human activities and uses. Beaches are one example of multi-use coastal environments, accommodating activities linked to leisure and recreation, amenity, conservation and business, often simultaneously. Ireland is no different in this regard, as its beach resources provide a range of goods and services of societal value. Ireland has 16 coastal counties and their associated local authorities have a beach management remit, a role that can present a number of challenges. The use of beach bye-laws is one option to support management of beach environments by local authorities. Local authority personnel tasked with beach management from each coastal local authority were surveyed to assess the actual and potential role of beach bye-laws in contributing to more effective management of beach environments and to broader coastal management. Usage of beach bye-laws varied across local authority areas and evidence suggested that the efficacy, use, and implementation of beach bye-laws differed from county to county. Beach bye-laws offer potential but interaction with other initiatives as part of a wider program for coastal management may yield improved results.     

Factors Influencing Behavior in a Boating Speed Zone

The greatest source of human-related mortality for endangered Florida manatees is collisions with watercraft. Regulation of boat speeds is the principal management tool to minimize this threat. Demands on law enforcement limit their ability to monitor boater behavior and managers seek alternative strategies to increase compliance. The purposes of this study were to: (1) explore the effectiveness of an on-site sign to enhance boater compliance in a boating speed zone, and (2) examine the environmental and boating characteristics that influence the probability of compliance. Signs designed to increase compliance were posted halfway through the 18-week study period. The signs were not related to compliance level. Logistic regression models showed that only time of day and boat type were significantly related to compliance. Results suggest that passive methods of persuasion may not be an effective means of influencing boater behavior.     

Scientific requirements for an abyssal benthic laboratory

For over thirty years man has studied “outer space” and installed satellites which watch the surface of the Earth. The great depths of the world ocean are, however, practically unknown and there is an urgent need to put abyssal benthic laboratories into “inner space” in order to study basic phenomena of interest to marine science and climatology as well as man's impact on the oceans.In view of the numerous problems related to global change, as a first step emphasis should first be on the role of the oceans and their inherent processes, which are the focus of such international programmes as the World Ocean Circulation Experiment (WOCE) and the Joint Global Ocean Flux Study (JGOFS). Multi-disciplinary registration of key events at selected key sites investigating the variability in time and space are of the utmost importance. The same methods and techniques must be used for the study of human impacts on the deep oceans caused by mining of metalliferous resources and by waste disposal as well as in basic studies. However, the investigation of the inner space of our planet has certain requirements. As long-term and large-scale investigations become more and more important, development of automized systems, largely independent from research vessels will be required. This will demand high capacities of energy for all technical functions as well as high storage capacities for data and samples. As a consequence the needs for two different—although overlapping—functional approaches are defined for future deep-sea deployments.(A) A system for long-term registration of the natural variability and long-term monitoring of human impacts: (B) A system for short-term observations and short-time experimentations. This report summarizes their technological demands. The envisioned interdisciplinary technology should deliver information on physical, biological and geochemical processes and their variabilities in the deep oceans. The prospected systems need to have the ability for real time video observation, data transfer and experimental manipulation, as well as sensing and sampling facilities with large storage capacities for long-term deployments.Prospective costs of the described multipurpose abyssal benthic laboratory will presumably exceed the funds for deep-sea research of a single country. A joint European effort could solve this problem and help to manifest a leading role for European marine science in international deep-sea and global change research.