A1-A1接头共晶接触反应钎焊的研究

本文研究了用Zn和Zn—Cu作中间夹层金属与Al形成共晶液相实现Al—Al接头的共晶反应钎焊。试验表明用Zn作中间夹层虽可与母材铝形成低熔点共晶液相,但由于对铝的强烈溶蚀作用,无法形成钎焊接头;在Al和Zn之间添加很薄的一层铜箔,可以防止Zn对Al的溶蚀,并与Zn、Al形成共晶液相,形成良好的钎焊接头。     

车轮在沙地上滚动的稳定性分析

采用试验分析方法，研究了车轮在沙地上滚动特性 探索了车轮失去稳定性的机理，指出了提高车轮在沙地上滚动稳定性的有效途径，为开发轮式沙漠汽车提供了依据。     

高寒地区沥青路面开裂形态与成因分析

以高寒地区沥青路面开裂调研资料为基础,对高寒地区沥青路面开裂病害进行形态描述与成因分析,归纳总结出该类地区沥青路面的主要开裂破坏形式,对高寒地区沥青路面结构与材料的研究工作具有指导作用,同时对类似地区公路建设中沥青路面结构与材料设计也具有借鉴作用。     

Seabed scene simulation and its realization in extending Vega

Realistic simulation of underwater scene is always difficult because of the special and complex vision effects in underwater space. Seabed is an important part of underwater environment. This paper describes the methods for seabed scene simulation based on OpenGL. It includes construction of fluetuant terrain based on the random sinusoidal algorithm, simulation of seabed flicker effect by means of circular texture mapping and generation of turbidity effect by using fog techniques. For the application based on the leading high level 3D development environment-Vega, underwater scene simulation is still a difficulty since there is no module for it. Based on the analysis of Vega software and the research on seabed scene simulation methods, a Vega extending module named “Underwater Space” was created through developing module class and extending lynx interface. The module class was designed through developing DLL written in C . The Lynx was extended through developing keyword configure file, GUI configure file and lynx plug-in DLL. The problem that Vega can‘t simulate underwater space, is elementarily resolved. The results show that this module is efficient, easy using, and the seabed scene images am vivid.     

谈SOLAS公约与船级社规范

一、国际海事公约与船级社规范关系 船级社制定规范的历史几乎同船级社本身具有的历史一样,已经超过了200多年,但船级社规范历来只涉及材料焊接、船体结构以及机电设备等基本方面.即使在1900年以前,不少国家的海事主管机关设想制定有关海上人命安全方面的法定要求时,船级社早已有了保证船舶基本安全的规范.这一历史事实,导致海事主管机关对于船舶安全的关注精力集中在了勘划载重线、计算稳性、规定防火安全、救生、航行安全以及无线电信设备等方面.     

关键是要把我们党建设得更好－－学习江泽民同志关于加强党的建设的论述

要实现党在现阶段的基本纲领，全面实现社会主义现代化建设的宏伟任务，关键是用邓小平理论武装全党，实践“三个代表”的重要思想，把我们宫建设得更好。     

高速公路联网收费网络安全性探讨

结合云南省东南区域联网收费网络的情况,从收费系统网络结构、收费系统硬件平台、收费系统操作平台、收费系统数据库平台、收费系统业务平台等几方面,就如何提高收费网络安全性的问题进行了探讨。动态路由、VLAN技术和3层交换技术的综合运用,使该系统收费网络的稳定运行取得了良好的效果。对今后高速公路联网收费系统的设计和实施具有一定的参考价值。     

抗坏血酸对家兔血小板内 cAMP 的影响

本实验用放射免疫法测定了家免血小板内 cAMP 含量。结果表明,家兔血小板内基础 cAMP 水平为9.05pmol/10~9血小板;2mg/ml、5mg/ml 和10mg/ml 抗坏血酸依次增高血小板内基础 cAMP水平到12.26、15.63和18.06pmol/10~9血小板。结果提示抗坏血酸升高血小板内 cAMP 水平可能是其抑制血小板聚集机理之一。     

Analysis on Ground Surface Deformation and Influence of Construction Parameters Caused by Two Different Shield Machines in Double-tube Tunnelling北大核心CSCD

Based on a shield-driven running tunnel project of Hangzhou Metro Line 2, this paper carries out field measuring of the ground surface deformation caused by two different shield machines in double-tube tunnelling in soft soil areas, obtains the laws of the surface deformation caused by shield-driven double-tube tunnelling and verifies the applicability of the modified Peck formula to double-tube tunnelling. The results show that in soft soil areas the impacts on ground surface deformation caused by different shield construction parameters in the previously and subsequently excavated tunnels are different, while the surface deformation changes sharply before and after the shield machine passing through the cutting face, and a rebound phenomenon occurs when the shield tail passes through the cutting face due to the influence of the grouting; The cutterhead torque of the shield machine in soft soil areas can be composed of five calculation factors, and the calculation results are in good agreement with the measured values. The larger the opening rate of the shield cutterhead is, the larger the average torque value will be, the higher the percentage of large ground loss rate will be, and the larger the maximum ground surface settlement will be; The ratio of cutterhead torque T to mucking volume per ring Q is used as the control parameter for analyzing the ground surface settlement, and a certain positive correlation between the ratio and the surface settlement value is determined, the smaller the cutterhead opening rate is, the more accurate the fitting results will be. © 2022, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

整车电源分配系统设计研究

文中针对整车电气设计最重要的一部分整车电源分配进行研究。从中央电气盒的选择,保险丝容量的计算以及保险丝与导线匹配设计等几个方面来展开,以求能够总结出一套行之有效的方法指导设计。为后续车型的开发作参考。