Artificial neural network approach to study the effect of injection pressure and timing on diesel engine performance fueled with biodiesel

This study intends to predict the influence of injection pressure and injection timing on performance, emission and combustion characteristics of a diesel engine fuelled with waste cooking palm oil based biodiesel using the artificial neural network (ANN) model. To acquire data for training and testing in the proposed ANN, experiments were carried out in a single cylinder, four stroke direct injection diesel engine at a constant speed of 1500 rpm and at full load (100%) condition. From the experimental results, it was observed that waste cooking palm oil methyl ester provided better engine performance and improved emission and combustion characteristics at injection pressure of 280 bar and timing of 25.5° bTDC. An ANN model was developed using the data acquired from the experiments. Training of ANN was performed based on back propagation learning algorithm. Multilayer perceptron (MLP) network was used for non-linear mapping of the input and output parameters. Among the various networks tested the network with two hidden layers and 11 neurons gave better correlation coefficient for the prediction of engine performance, emission and combustion characteristics. The ANN model was validated with the test data which was not used for training and was found to be very well correlated.     

The relationship between ‘position-port’, ‘hard-port’ and ‘soft-port’ characteristics and port performance: conceptual models

This research study attempts to conceptualize models based on the relationship between characterization factors and port performance. By selecting a universe of the 230 largest European ports in terms of cargo throughput, 43 valid answers were obtained. Factor analysis and K–W (Kruskal–Wallis) tests were carried out taking as a reference the port performance theory. Findings reveal the existence of a relationship between port performance and its characterization factors, delving into the development of conceptualized models that contribute to deepen the knowledge of port competition structure and dynamics within Europe.     

Some economic aspects of conflicts over land use in the coastal zone

Abstract

Recent land use legislation pays particular attention to the coastal zone where age‐old conflicts have recently accelerated. Flexibility is required in policy because visible conflicts are tied into complex physical and social systems which may require changing patterns of land use over time. Public policy is altering property rights and a thorough understanding of the economic and social roles played by those rights is required. Economic models can be used to understand some major changes such as types of alteration of the environment, but may be ignored or misused unless a better understanding of coastal decision processes is developed.     

A three-stage least squares approach to the analysis of airline strategies for aircraft size and airline frequency on the north Atlantic: an airline case study

In response to increasing demand, airlines may increase capacity by increasing the frequency of flights or they may choose to increase aircraft size. This may yield operating cost economies. If the airports they operate from are capacity constrained, they will be limited in the extent that they can change frequency which will limit their ability to compete with the number of frequencies offered. This article focuses on this trade-off and pays particular attention to the practices of a specific airline. Conclusions are offered on the impact of inter alia competition, changes in aircraft technology, 9/11 and the impact of slot constraints. It appears that changes in size are more important than frequency, which is consistent with the presence of slot constraints and there is a significant impact of competition. As the concentration of carriers increases, so aircraft size falls. 9/11 also has a significant impact on traffic whereas the introduction of the Boeing 777, as an illustration of a change in technology, does not.     

Preview suspension control for a full tracked vehicle

In this study, preview control algorithms for the active and semi-active suspension systems of a full tracked vehicle (FTV) are designed based on a 3-D.O.F model and evaluated. The main issue of this study is to make the ride comfort characteristics of a fast moving tracked vehicle better to keep an operator’s driving capability. Since road wheels almost trace the profiles of the road surface as long as the track doesn’t depart from the ground, the preview information can be obtained by measuring only the absolute position or velocity of the first road wheel. Simulation results show that the performance of the sky-hook suspension system almost follows that of full state feedback suspension system and the on-off semi-active system carries out remarkable performance with the combination of 12 on-off semi-active suspension units. The results simulated with 1^st and 2^nd weighting sets mean that the suspension system combined with the soft type of inner suspension and hard type of outer suspension can carry out better ride comfort characteristics than that with identical suspensions. The full tracked vehicle (FTV) system is uncontrollable and the system is split into controllable and uncontrollable subspace using singular value decomposition transformation. Frequency response curves to four types of inputs, such as heaving, pitching, rolling, and warping inputs, also demonstrate the merits of preview control in ride comfort. All the frequency characteristic responses confirm the continuous time results.     

Enhanced traffic information dissemination to facilitate toll road utilization: a nested logit model of a stated preference survey in Texas

This paper investigates the effects of the provision of traffic information on toll road usage based on a stated preference survey conducted in central Texas. Although many researchers have studied congestion pricing and traffic information dissemination extensively, most of them focused on the effects that these instruments individually produce on transportation system performance. Few studies have been conducted to elaborate on the impacts of traffic information dissemination on toll road utilization. In this study, 716 individuals completed a survey to measure representative public opinions and preferences for toll road usage in support of various traffic information dissemination classified by different modes, contents, and timeliness categories. A nested logit model was developed and estimated to identify the significant attributes of traffic information dissemination, traveler commuting patterns, routing behavior, and demographic characteristics, and analyze their impacts on toll road utilization. The results revealed that the travelers using dynamic message sign systems as their primary mode of receiving traffic information are more likely to choose toll roads. The potential toll road users also indicated their desire to obtain traffic information via internet. Information regarding accident locations, road hazard warnings, and congested roads is frequently sought by travelers. Furthermore, high-quality congested road information dissemination can significantly enhance travelers’ preferences of toll road usage. Specifically the study found that travelers anticipated an average travel time saving of about 11.3 min from better information; this is about 30 % of travelers’ average one-way commuting time. The mean value of the time savings was found to be about $11.82 per hour, close to ½ of the average Austin wage rate. The model specifications and result analyses provide in-depth insights in interpreting travelers’ behavioral tendencies of toll road utilization in support of traffic information. The results are also helpful to shape and develop future transportation toll system and transportation policy.     

An exploratory analysis of joint-activity participation characteristics using the American time use survey

This paper presents a detailed exploratory analysis of joint activity participation characteristics using the American Time Use Survey (ATUS). As a very large nationwide survey that explicitly elicited information on both household and non-household companions for each activity episode, the ATUS is ideally suited for this analysis. Several intuitive and interesting results are obtained. Joint episodes are found to be of longer durations, significantly likely to take place at the residence of other people, and often confined to certain time periods of the weekday. In addition, important differences in these characteristics are also observed based on activity purpose, companion type, and the day of the week. These findings are intended to provide the basis for the justification of detailed collection of joint activity–travel participation information in household activity–travel surveys, and also as a stimulant for further empirical analysis and modeling of joint activity participation behavior.

Development of an intelligent CAE system for auto-body concept design

The concept design phase is a critical step in auto-body design, as it has a great effect on later design work. This paper describes the implementation of an auto-body structure design in the early stages of a new auto-body developing program. In order to reduce the long design period and analysis error that plagues traditional auto-body concept design, an intelligent CAE system has been successfully developed and implemented based on the UGS NX/API opening platform. This system, the so-called ACD-ICAE (Auto-body concept design-intelligent computer aided engineering) System that means concept design-intelligent computer aided engineering system, employs a fully parametrized template method to build the conceptual auto-body geometry model and FEM model quickly and easily. It also integrates auto-body modeling, analysis and optimization on only one CAD platform via a parametric variables database. Moreover, all parametric variables are shared and updated in different phases of the ACD-ICAE System. A wizard User Interface (UI) based on knowledge of auto-body engineering was developed and used in this system. The procedures implementing the functional diagram of the ACD-ICAE system are also provided. A typical example of a car body concept design with four doors shows that the ACD-ICAE system is efficient and accurate.     

Estimation of wave-induced ship hull bending moment from ship motion measurements

A time-domain technique for estimating wave-induced ship hull bending moment from ship motion measurements is presented. This technique is developed to improve hull response monitoring systems. Artificial neural networks are used to model the time-domain relationship between the wave-induced vertical bending moment and the coupled heave and pitch motions. The application of the proposed technique is validated using experimental data.