茅草街大桥368 m跨钢管拱肋制作与安装工艺介绍

介绍了茅草街大桥368m大跨径钢管拱肋制作、安装工艺.     

新型缓和曲线在基本型平面线形设计中的应用

在约束条件LC/LS=1下,推导了新型缓和曲线[1]在基本型平面线形设计中的计算公式,通过一个实例,展示了其应用效果.     

花岗岩地层中盾构掘进效率影响因素研究

为了定量对比盾构掘进花岗岩地层时的掘进效率,提出一种表征掘进效率的特征参数,并依托深圳市城市轨道交通8号线一期工程进行掘进试验和地层参数现场量测,分析了各影响因素和掘进效率的相关性,提出了针对不同地层的掘进效率控制措施.研究结果表明:岩石的单轴抗压强度和岩体的完整性系数均与掘进效率负相关,可用幂函数近似表达地层参数和掘进效率之间的经验关系;可用反比例函数近似表达掘进效率与总推力之间的经验关系,总推力对掘进效率的影响程度随地层坚硬程度的升高而降低;低推力高转速的掘进参数组合在微风化地层中效率较高,中等风化地层中总推力、刀盘转速分别为14000±1000 kN、1.6±0.1 rpm时掘进效率较高,可以通过牺牲掘进效率的方法来在该掘进速率水平上短期内提高掘进速率.     

瞄准交通强国建设新坐标 开启海南海事发展新征程

《交通强国建设纲要》(以下简称《纲要》)开宗明义,指出建设交通强国是以习近平同志为核心的党中央立足国情、着眼全局、面向未来作出的重大战略决策,是建设现代化经济体系的先行领域,是全面建成社会主义现代化强国的重要支撑,是新时代做好交通工作的总抓手。围绕着落实《纲要》,交通运输部海事局站在统筹和引领海事发展大局的高度,提出了以"五个一流"谱写新时代交通海事新篇章的发展思路,这为我们进一步学习领会和贯彻落实好交通强国建设的目标任务,推动和提升海事高质量发展提供了基本遵循和奋斗目标。     

关于沥青混凝土路面的常见病害及防治措施

沥青混凝土路面主要应用于公路的面层,由于沥青混凝土材料本身的差异,以及受设计、施工水平的影响,沥青路面常常出现松散、脱皮、冻胀翻浆、水破坏、沉陷、开裂、泛油、坑槽等病害。这些病害的出现严重影响了路面行车速度、行车安全、加大了汽车磨损、缩短了沥青路面的使用寿命,使行车不畅,行成交通压力,造成道路使用年限缩短。本文具体结合工程项目阐述沥青混凝土的施工工艺、病害分析及防治措施。     

船舶柴油机调速器有限转角力矩电机优化控制

本文针对新型的船舶柴油机调速器有限转角力矩电机控制系统优化与稳定性问题,在Matlab/Simulink中基于电枢回路方程与力矩方程搭建有限转角力矩电机动态系统模型.通过数据拟合方法构建电机非线性模型,基于线性控制理论对串级PID控制系统进行稳定性分析,最后使用遗传算法对PID参数进行优化设计.研究成果可为该电机用于柴油机电子调速执行机构提供优化及控制参考.     

What will be the fuel for future shipping industry?

正The new green energy sources,such as solar energy,wind energy and biofuel,have been used as alternative energy sources for traditional fossil fuels in energy,electricity and automobiles.Driven by the increasingly stringent rules and regulations of international maritime environmental protection,the     

Dynamic Behavior of Two Part Towing Cable System During Turning

An improved numerical method is used to simulate the dynamic behavior of a two part towing cable systems during turnings. In U turns and full turns, periodical heave motions are found both for the towed vehicle and for the depressor. Periodic motions of the subsea units and of the cable surface tension are closely related to the turning parameters, such as turning velocity and turning radius. System parameters, such as length of the second cable and the vehicle hydrodynamics, also damp turning instability.     

Application of digital image correlation method to in-situ dynamic strain measurement

Application of digital image correlation (DIC) method to determination of in-situ dynamic strain is presented in this study. Firstly, an integrative software is programmed based on the DIC algorithms and point-wise least-squares fitting technique. Then, simulated speckle images are generated to study the computational accuracy of this software. The experimental setup and procedures for measuring in-situ dynamic strain through both DIC and strain gauge are proposed. The DIC results are close to those measured by strain gauge. This fact reveals that DIC is a practical and effective tool for in-situ dynamic strain measurement. Finally, the full-field in-situ dynamic strain of another specimen is measured by DIC, and the overall distribution of the strain in the measurement area is clearly shown.