软土地层中暗挖轨道交通车站设计方案探讨

为解决上海城市发展与轨道交通建设之间矛盾,提出了针对软土地层中用暗挖法建轨道交通车站的设计前提、方法、内容。重点对用盾构法修建明、暗结合型式,全暗挖,地上、地下配合的轨道交通车站设计进行了初步探讨,以期促进软土地层中暗埋轨道交通车站技术的发展。     

资源节约型航道建设在京杭运河浙江段提升改造中的理论与实践

京杭运河是我国纵贯南北的内河水运大通道，浙江段担负着我省经济发展所需大众货物的运输任务。文章运用资源节约型航道建设理论，在京杭运河浙江段提升改造工程中进行实践，为其他航道提升改造提供了样板。     

大倾角中厚煤层软弱顶底板柔性护巷技术

在大倾角中厚煤层沿空留巷中,以往的支护方式难以满足大倾角中厚煤层巷道特殊的围岩结构稳定的需要,同时无法适应工作面内矸石垮落造成留巷困难。文章针对这一难题,首次提出并采用了"柔性护巷"技术,通过利用巷道上帮形成的由垮落矸石堆积在特制钢筋网上的"包护带",允许巷道顶板有一定的下沉量,从而使矸石充分为巷道顶板组合岩梁结构提供支撑力。在总结其施工工艺的基础上,通过现场试验,研究了巷道矿压显现规律、顶板移动规律、矸石垮落堆积规律和钢筋网变形规律;实验结果表明,在利用锚、网、索、支柱联合支护的基础上,应用"柔性护巷"技术能有效地解决大倾角中厚煤层沿空留巷技术难题。     

Novel experimental strategy for high resolution AFM imaging of membrane-associated bacterial toxins

Bacterial pore-forming toxins （PFTs） are essential virulence factors of many human pathogens. Knowl- edge of their structure within the membrane is critical for an understanding of their function in pathogenesis and for the development of useful therapy. Atomic force microscopy （AFM） has often been employed to structurally interrogate many membrane proteins, including PFTs, owing to its ability to produce sub-nanometer resolution images of samples under aqueous solution. However, an absolute prerequisite for AFM studies is that the samples are single-layered and closely-packed, which is frequently challenging with PFTs. Here, using the prototypical member of the cholesterol-dependent cytolysin family of PFTs, perfringolysin O （PFO）, as a test sample, we have developed a simple, highly robust method that routinely produces clean, closely-packed samples across the entire specimen surface. In this approach, we first use a small Teflon well to prepare the supported lipid bilayer, remove the sample from the well, and then directly apply the proteins to the bilayer. For reasons that are not clear, bilayer preparation in the Teflon well is essential. We anticipate that this simple method will prove widely useful for the preparation of similar samples, and thereby enable AFM imaging of the greatest range of bacterial PFTs to the highest possible resolution.     

多元评价体系组合模型在铁路隧道变形预测中的应用

为克服传统预测模型结构单一、预测精度及稳定性不足等缺陷,提出多元体系组合预测模型的建模思路。首先,基于支持向量机、BP神经网络及ARMA模型3种单一预测模型,构建铁路隧道变形预测体系;再以均方根误差、误差平方和及平均绝对误差等为评价准则或指标,构建各预测结果的误差评价体系,求解各单项预测模型的权值贡献指数,得到最优组合权值;然后利用后验差检验、残差检验和关联度检验构建预测精度校验体系,对组合预测结果进行检验,评价预测模型的有效性;最后,结合工程实例,对多元体系组合预测模型在特大断面隧道中的变形预测效果进行检验。结果表明:多元评价体系组合模型预测相对误差值均小于2%,具有较高的预测精度,且较单一预测模型具有更高的预测精度,也一致通过相关检验,验证了多元体系组合预测模型的有效性。     

船用复合材料接头全场应力测量方法研究

对应用锁相红外热成像技术测量复合材料结构应力的可行性进行了研究。基于正交各向异性复合材料的热弹性理论(TSA),提出了一种有效和简洁的试验标定方法。通过标定试验获取了玻璃钢材料合理的加载频率f以及热弹性耦合常数CK。对两种典型的船用玻璃钢复合材料连接接头内的应力分布进行了测量,通过与数值计算结果比较,表明锁相红外热成像技术是一种快速、高效、可靠的结构全场应力测量手段。     

基于PLC与变频器的船用载货电梯控制系统研究

某型船用载货电梯采用PLC控制。PLC单独使用时,在控制装置在使用过程中存在一些不足,会出现运行不稳定、能耗大、噪音大等问题。通过加装变频器对某型船的PLC单独控制的系统进行系统的升级改造,介绍了基于PLC与变频器的电梯控制系统硬件组成方案及逻辑控制程序。仿真结果表明加装变频器后,电梯故障率降低,提高了电梯运行的安全性和可靠性。     

A non-geometrically similar model for predicting the wake field of full-scale ships

The scale effect leads to large discrepancies between the wake fields of model-scale and actual ships, and causes differences in cavitation performance and exciting forces tests in predicting the performance of actual ships. Therefore, when test data from ship models are directly applied to predict the performance of actual ships, test results must be subjected to empirical corrections. This study proposes a method for the reverse design of the hull model. Compared to a geometrically similar hull model, the wake field generated by the modified model is closer to that of an actual ship. A non- geometrically similar model of a Korean Research Institute of Ship and Ocean Engineering (KRISO)’s container ship (KCS) was designed. Numerical simulations were performed using this model, and its results were compared with full-scale calculation results. The deformation method of getting the wake field of full-scale ships by the non-geometrically similar model is applied to the KCS successfully.     

汽车雨水管理的数值仿真与评价

汽车在雨天行驶时,落到侧窗表面的雨水会影响驾驶员的侧向视野和后视野,从而危及行车安全,故侧窗雨水管理对于整车安全非常重要。但迄今为止对于侧窗雨水管理问题尚未有一个统一而有效的评价方法。为此,本文中应用液膜模型和拉格朗日粒子模型对某款SUV进行了雨水仿真,基于人机工程学和粒子束轨迹技术提出了侧窗雨水管理的评价方法,并对仿真结果进行了相应的分析。     

浅析K型隐藏式把手受力件材料应用及DV测试

随着近年来汽车创新发展不断兴起,汽车把手这一传统领域也推出了创新产品隐藏式车门把手.针对目前市场出现旋转式隐藏门把手断裂或折断等失效问题,提出了对于隐藏式把手总成主要受力件的塑料材料选择方案和相关塑料材料物理性能分析.又对此方案下的总成试验件进行了机械性能测试并给出结果.