关于反洗钱的法律思考

面对日益猖獗的洗钱行为,我国制定了《反洗钱法》予以规制,但反洗钱仍存在许多薄弱之处,应借鉴国外发达国家的先进经验,构建完善的反洗钱法律体系.     

不同优化方法对斜拉桥成桥状态的影响分析探究

参考工程案例实用数据,借助有限元数理计算方式,基于零点移位法和最小屈曲应变能法,对斜拉索桥成桥状态数理计算开展专题分析探究。经过相关索力、弯矩及线形比对,分析了不同优化计算方法对该类型桥梁成桥状态的影响,以为同类斜拉索桥工程应用提供研究和技术参考,助力建设安全牢固的斜拉索桥梁。     

三段式铸造桥壳热压装曲线的应用研究

通过对重型汽车驱动桥铸造桥壳热压装机理分析及最大压装力和保压力的计算,绘制出理想状态下的热压装曲线.为实时监控热压装全过程,在现有桥壳压装机上引入了微机控制记录系统,可自动生成并打印热压装曲线.以可能出现的不合格压装曲线为例,对影响桥壳热压装一次合格率的影响因素进行了分析,并提出了相应的改进建议.     

秦沈DC-7程控调度分机优化方案的分析与研究

分析秦沈线当前DC-7程控调度分机存在的问题,借鉴既有线电气化区段使用情况,提出合理优化解决方案。     

Optimal scheduling of the flexray static segment based on two-dimensional bin-packing algorithm

FlexRay is a reliable and hard real-time in-vehicle communication protocol that is strongly promoted by car manufacturers as the de facto standard in the automotive domain. The protocol offers both a time-triggered and an eventtriggered architecture. This paper focuses on the optimal scheduling of the time-triggered component of FlexRay known as the static (ST) segment using a two-dimensional bin-packing technique. To maximize the bandwidth utilization in the ST segment, a fast heuristic as well as an efficient integer linear programming approach are proposed. Our methods directly schedule signals into slots including frame packing, according to signal-based data scheduling and the slot/ cycle multiplexing mechanisms presented by the latest version of the FlexRay protocol. The benefits of our proposed methods are demonstrated by extensive experiments on synthetic and an automotive X-by-wire system case study. An additional test case is examined to emphasize the superior performance of the proposed approach relative to that of existing optimal scheduling approaches.     

Damage Accumulation in Rail Steel under Rolling with Slippage and Its Analysis

Experimental research results of surface damage accumulation in rail steel under rolling with slippage are presented. Hertz contact for two rollers made of rail and wheel steels was realized in the test. The influence of loading regime upon wear of rail is considered. The estimation of characteristics of surface fracture resistance for rail steel is made. The method to predict the life of rail steel under given conditions of regular loading is proposed.     

对《玻璃纤维增强塑料渔船建造规范（1995）》的意见

我国最早的<玻璃纤维渔船建造规范>出自于1989年,为试行本,后经过一系列修改而成1995年版<玻璃纤维增强塑料渔船建造规范>(以下简称<95玻璃钢渔规>)使用至今.随着建造玻璃钢渔船数量的增加,不断地探索与经验积累,在<95玻璃钢渔规>的应用中发现仍有许多值得研究与探讨的地方.     

我国国际工程承包业的地位和发展

分析了国际工程承包市场的现状与发展趋势，以及我国在国际工程承包市场中的地位，指出了我国国际工程承包业需要解决的问题，并提出了促进其发展的建议。     

随机变分方程解的存在,唯一性问题

研究了随机有限元方法的理论基础－随机变分方程解的合理性问题，证明了一般形式的随机变分方程解的存在与唯一性定性，明确了在随机扰动算子不足以破坏均值微分算子的强制性条件－不会导致方程类型变异的前提下，Ｆｒｅｄｈｏｌｍ择一定理的第二个结果成立，此时在概率１的意义上变分解存在而且唯一。     

CRTSⅢ型路基纵连轨道板制造技术及创新

成灌铁路采用了全新的CRTSⅢ型无砟轨道结构,在路基地段敷设了CRTSⅢ型路基纵连轨道板。介绍了CRTSⅢ型路基纵连轨道板的结构特点、二雏可调钢模技术、自动调整测量系统、生产工艺及检测方法,并总结了该种轨道板的主要创新点。