TSH RECEPTOR GENETIC ALTERATIONS IN THE AUTONOMOUSLYFUNCTIONING THYROID ADENOMAS

Objective To determine the relationship between TSH receptor gene mutations and autonomously functioning thyroid adenomas (AY‘]rAs). Methods The thyroid samples from 14 cases of diagnosed AFTAs were analyzed, with normal thyroid specimens adjacent to the tumors as controls. The 155 base pairs DNA fragments which encompassed the third cytoplasmic loop and the sixth transmembrane segments in the TSH receptor gene exon 10 were amplified by Polymerase chain reaction (PCR) and analyzed by the single-strand conformation polymorphism (SSCP). Direct sequencing of the PCR products was performed with Prism Dye Terminator Cycle Sequencing Core Kit.Results 6 of 14 AFTA specimens displayed abnormal migration in SSCP analysis. In sequence analysis of 3 abnormally migrated samples, one base substitution at nucleotide 1957 (A to C) and two same insertion mutations of one adenosine nucleotide between nucleotide 1972 and 1973 were identified. No mutations were found in controls. Conclusion This study confirmed the presence of TSH receptor gene mutations in AFTAs; both one-point substitution mutation and onebase insertion mutation were found to be responsible for the pathogenesis of AFTAs.     

情景分析法在交通规划中的应用研究

运用情景分析法,综合考虑影响交通发展的5个主要因素,结合专家群体的知识与实际数据资料、各种信息与计算机技术以及数学模型与决策者的经验智慧,依次得到     

血清CPK、LDH、GOT和LAP活性对急性颅脑损伤的诊断价值

对８０例急性颅脑损伤患者血清ＣＰＫ、ＬＤＨ、ＧＯＴ和ＬＡＰ活性进行了测定。结果显示，急性颅脑损伤后血清ＣＰＫ和ＬＤＨ活性显著升高（Ｐ＜０．０５），而血清ＧＯＴ和ＬＡＰＩ活性升高不明显（Ｐ＞０．０５），至于血清酶活性对判断急性颅脑损伤的脑损伤程度和患者预后的价值有待继续探讨。     

基于满意优化的模糊多目标预测控制算法研究

提出了以满意优化取代传统的最优控制对模糊预测控制中的性能指标进行优化的方法。以模糊多目标单步预测模型为例，给出了系统对某一控制目标的满意优化控制算法，并在此基础上提出了基于满意优化的模糊多目标预测控制算法。     

血清铬与糖尿病的关系

测定了30例正常人及30例糖尿病患者血清铬(Cr)水平。结果表明:糖尿病人血清铬含量显著低于正常人(P<0.01)。血清Cr~(3+)含量与血糖水平、三酸甘油酯水平呈负相关(P<0.01和P<0.05)。     

改进并应用双电极埋植技术记录大鼠胃肠肌电活动

目的　改进并应用双电极埋植技术记录大鼠的胃肠肌电活动。方法　选用外径仅 0 .5mm的聚四氟乙烯薄膜包绕的 7股银丝绝缘导线制作记录电极 ,采用套针埋植电极。结果　共埋植双电极 160对 (每只大鼠 1～ 5对 ) ,约 1周时 ,15 4对 ( 96.3 % )电极可持续有效地记录胃肠肌电活动 ,5周后仍有 12 3对电极 ( 76.9% )可正常工作。结论　改进的肌电记录法具有以下优点 :①方法简便可行 ,成功率高 ;②对研究对象损伤轻微 ,在小动物及人体上均适用 ;③可同时埋植多对电极 ,记录多处肌电活动 ;④电极工作稳定持久 ,可行慢性试验 ,动态观察接近生理状态下的胃肠肌电活动     

紫杉醇诱导人肺腺癌多药耐药细胞系的建立及DNA polβ、mdr1、mrp1、GST-πl、rp和topo Ⅱ基因的表达

目的体外建立人肺腺癌细胞多药耐药细胞系,观察其生物学特性并探讨其细胞内DNA polβ和多药耐药基因mdr1、mrp1、GST-πl、rp和topo Ⅱ的表达及意义。方法以紫杉醇为诱导药,采用间歇逐步增加剂量法建立人肺腺癌多药耐药细胞系A549/TXL20;MTT法检测A549/TXL20对紫杉醇、顺铂、长春新碱、5-氟尿嘧啶和丝裂霉素的耐药指数(RF);细胞克隆形成法测定A549/TXL20对紫杉醇的敏感性;高效液相色谱测定细胞内紫杉醇的浓度;RT-PCR法测定人肺腺癌多药耐药细胞系A549/TXL20中DNA polβ、mdr1、GST-π、mrp1l、rp和topo Ⅱ的基因表达。结果①A549/TXL20形态不规则,较亲本细胞略小,核/浆比增加,倍增时间没有明显变化;②A549/TXL20对紫杉醇的RF为19.3,对顺铂的RF为67.4,对长春新碱、5-氟尿嘧啶、丝裂霉素和顺铂等抗癌药物有不同程度的耐药性;③A549/TXL20对紫杉醇的敏感性降低,其紫杉醇的含量较亲本细胞下降;④A549/TXL20细胞中DNA polβ、mdr1、GST-π、mrp1l、rp的基因表达量分别较A549细胞中的表达量明显增加,差异具有统计学意义(P<0.05)。结论建立了相对稳定的人肺腺癌多药耐药细胞系A549/TXL20,其耐药机制可能与mdr1、GST-π、mrp1l、rp和DNA polβ基因的高表达有关。     

基于效益机制的分局调度货运日计划优化模型

在效益机制下进行货运日计划优化的目的是，在有限的运输资源条件下，使日计划实现运输效益最大化．在分析车站能力、空车供应、限制口能力和分界口交接等诸多运输约束的基础上，通过对运输约束准确的数学描述，建立了以运输效益最大为目标函数、以运输限制为约束的优化模型。     

无水乙醇肾动脉栓塞的并发症

报告无水乙醇肾动脉栓塞治疗肾肿瘤18例的临床并发症,简要讨论了与并发症有关的因素和预防措施。     

Five-axis interpolation of continuous short linear trajectories for 3[PP]S-<Emphasis Type="Italic">XY</Emphasis> hybrid mechanism by dual Bezier blending

A novel five-axis real-time interpolation algorithm for 3[PP]S-XY hybrid mechanism is proposed in this paper. In the algorithm, the five-axis tool path for controlling this hybrid mechanism is separated into two sub-paths. One sub-path describes the movement of 3[PP]S parallel kinematic mechanism module, and the other one describes the movement of XY platform. A pair of cubic Bezier curves is employed to smooth the corners in those two sub-paths. Based on the homogenous Jacobian matrix of 3[PP]S mechanism, a relationship between the position errors of every driving joint in hybrid mechanism and the position deviation of the tool tip center point at the moving platform is established. This relationship is used to estimate the approximation error for the corners smoothing according to the accuracy requirement of tool tip center in interpolation. Due to the high computational efficiency of this corner smoothing method, it is integrated into the look-ahead module of computer numerical control (CNC) system to perform online tool path smoothing. By performing the speed planning based on a floating window scheme, a jerk limited S-shape speed profile can be generated efficiently. On this basis, a realtime look-ahead scheme, which is comprised of path-smoothing and feedrate scheduling, is developed to acquire a speed profile with smooth acceleration. A monotonic cubic spline is employed for synchronization between those two smoothed sub-paths in tool path interpolation. This interpolation algorithm has been integrated into our own developed CNC system to control a 3PRS-XY experimental instrument (P, R and S standing for prismatic, revolute and spherical, respectively). A club shaped trajectory is adopted to verify the smoothness and efficiency of the five-axis interpolator for hybrid mechanism control.