A proposal for cost-related and market-oriented train running charges

This paper examines some key aspects of a charging system for promoting railway transport, including charges reflecting a clear relationship with costs (transparency) and charges reflecting the quality of the infrastructure manager's service. Train running charges recover track-related costs and can help to develop a charging system that meets these requirements. To orient train running charges to the market, a method for processing track maintenance and renewal costs is proposed whereby the quality of the service provided by an infrastructure is measured according to its utility to the railway undertaking. To achieve transparency, a single indicator is used for cost planning and the subsequent levying of costs on railway undertakings. The paper includes an example of how proposed train running charges would be calculated according to data from 14 European countries. The example shows that short-distance trains generate the lowest maintenance and renewal costs, followed by long-distance trains and freight trains.     

车用柴油机NO_x形成及控制

相对汽油发动机污染物排放,柴油发动机CO和CH的排放较低,不到汽油机的10%,但NOX排放水平却高于汽油发动机。本文重点讨论柴油发动机排气污染物中NOx的成分及危害,分析了NO的生成机理及影响因素,提出了控制柴油机NO排放的技术和方法。     

铝合金车身零部件设计研究

文章通过对铝合金发动机盖设计流程的描述,通过对比铝合金与钢的不同点,归纳了铝合金发盖设计所需要关注的要点,并提供了铝合金板材选择的方式.在不同于钢制发动机盖的点上提出了设计要求,明确了铝合金发盖的设计方法.     

Simulation of mixed gas formation for a spray-wall complex guided LPG direct injection engine

To obtain an ultralean air-fuel ratio and to reduce engine-out NOX and HC emissions induced by the richer mixture near the spark plug, a spray and wall complex guided combustion system has been developed by utilizing the fuel characteristics of LPG. The new combustion system configuration is optimized by using a commercial CFD code, FIRE V2013, and the reliability of the system has been experimentally demonstrated by Plane Laser-Induced Fluorescence (PLIF). The mixture formation in the new combustion system under part load (2,000 rpm) is numerically simulated. With an injection timing of 40°CA BTDC, the LPG spray which is injected from two upper holes, reaches the ignition point, and the other part of the LPG spray which is injected from the bottom hole, is directed to the ignition point through the vertical vortices at the same time. At the ignition timing of about 20°CA BTDC, the two-part mixtures have been shown to form a stable and richer stratified mixture around the ignition point, and the maximum global air-fuel ratio reaches to 60: 1.     

ERP在柴油机柔性装配线上的应用

介绍了自主开发的“ERP”系统,及与之匹配的“取货制”物流配送,解决了在一条柔性装配线上装配650种以上机型混装问题,实现了企业计划、定单、技术准备、财务、质量和制造等的核心业务的网络控制,提高了企业的整体竞争力。     

高速公路中央分隔带槽形混凝土护栏的开发研究

简要介绍了高速公路中央分隔带槽形混凝土护栏的开发过程，提出了改进后的中央分隔带混凝土护栏的定型尺寸。研究结果表明，改进后护栏不仅造价降低，同时也改善了车辆碰撞的防护效果。     

���˹���������������ɢ��������ʵ֤����

国家体育场作为北京奥运会的主会场成功地承担了开闭幕式和田径赛事任务。本文研究了其停车场车辆的交通疏散问题,制定了疏散方案。首先,分析了国家体育场停车场和泊位布局及车辆疏散的具体条件。其次,通过给定环境的场景和参数设定,对具体的奥运场馆停车场车辆的疏散方案进行了仿真和评价。最后,利用奥运会开幕式的车辆疏散实测数据进行了对比分析,在仿真中要员和贵宾车辆的总疏散时间为26min,而奥运会开幕式车辆疏散实测结果表明,全部要员、贵宾疏散完毕,共用时27min,从而验证了车辆疏散方案的准确性和实用性。     

钢桥面铺装混合料三轴重复加载试验变形特性

为了研究钢桥面铺装材料的高温变形特性及其车辙预估方法, 针对MA及SMA两种钢桥面铺装混合料, 采用三轴重复加载试验评价其高温性能, 并根据试验结果, 通过多元线性回归得到材料的非线性计算模型参数, 使用ABAQUS有限元软件, 模拟三轴试验过程, 将计算变形与实测变形相比较。发现两种混合料高温变形发展规律以及对不同荷载条件的响应方式不同, SMA具有优异的高温抗变形能力; 有限元模拟的误差约为10%。分析结果表明: 采用三轴重复加载试验和多元线性回归确定材料的非线性计算模型参数的方法可靠, 模型参数可用于沥青桥面铺装的车辙变形预估。     

Effect of ABCA1-V771M polymorphism on plasma lipid levels and its relationship with coronary atherosclerotic heart disease

Objective To explore the risk association of ABCA1-V771M polymorphism with coronary heart disease (CHD) in Hart nationality in Northwest of China. Methods With case-control study, ABCA1-V771M polymorphism was detected in 204 unrelated Hart nationality people in Northwest of China, and all the subjects by coronary angiography were grouped into 106 cases and 98 controls. The genotypes and alleles frequency distribution of ABCA1-V771M polymorphisms were analyzed by PCR-RFLP analysis, and the clinical statistics of serum lipids were compared and its effects of ABCA1-V771M polymorphism on the plasma lipid levels and coronary atherosclerotic heart disease were analyzed. Results The genotypic frequencies of ABCA1-V771M polymorphism matched well under Hardy-Weinberg equilibrium (P>0.05), V and M allelic frequencies were 33.3% and 66.7%. In comparison with VV VM genotype carriers, MM genotypes carriers had much lower plasma levels of HDL-C (P<0. 001) and much higher plasma levels of TG (P<0. 05). M allelic frequency in CHD group was significantly higher than V allelic frequency (P<0. 05). M allele was related with more severity of atherosclerosis in the coronary artery than V allele (P<0.05). However, there was no obvious difference in the incidence of AMI among carriers with three genotypes of ABCA1-V771M polymorphism (P>0.05). Conclusion ABCA1-V771M polymorphism was not only associated with the plasma levels of HDL-C and TG, but also related to the susceptibility and severity of coronary atheroselerotic heart disease. Moreover, M771 allele appeared to be atherogenie among Han population in Northwest of China.     

沥青路面PCI中车辙换算系数研究

通过对国内外车辙换算系数取值方法的研究,结合实体工程的实测数据与实际路况的对比,对现有车辙换算系数的优缺点进行了分析,提出了车辙换算系数的连续式计算公式。研究表明:根据现有车辙换算系数计算方法计算得到PCI指标值,与实际路况多数存在较大的偏差;而采用研究提出的车辙换算系数计算公式得到的PCI指标值,与实际路况有较好的一致性。