Optimal Design for the Rear-Glass Joint of an Automobile for Squeak and Rattle Noise Reduction

Ever since vehicle noise, vibration, and harshness (NVH) reduction technology made dramatic improvements, vehicle interior noises represented by Squeak and Rattle (S/R) becomes an ever more important factor to improve the emotional quality of vehicles. Generally, people detect S/R noises on automotive interior parts, brake system, suspension, Body in White (BIW), etc. Among them, the rear-glass joint is a major source for vehicle interior noise, and can cause S/R noises under a variety of environmental and driving conditions. This study uses, two approaches, experimental and numerical approaches, to define the cause of S/R noise at the rear-glass section. Based on these two approaches, this study confirms that S/R noises generate through the contact between bottom side of molding and BIW. The sealant penetration length, panelmolding distance, and sealant width are the parameters affecting noise generation. In addition, this study created an optimal design with Design of Experiments (DOE) of the rear-glass joint. The design maximized the sealant penetration length, which is a parameter that majorly affects noise. The optimal design comprises of two steps: sealant injections shape optimization and rear-glass joint parameter optimization. Each step is carried out with FEA and validated by sealant penetration experiments. Through these optimizations, this study obtained an optimum combination of design parameters and fignificantly reduced the noise generated by rear-glass section.     

Dynamics characteristics analysis and control of FWID EV

Compared with internal combustion engine (ICE) vehicles, four-wheel-independently-drive electric vehicles (FWID EV) have significant advantages, such as more controlled degree of freedom (DOF), higher energy efficiency and faster torque response of an electric motor. The influence of these advantages and other characteristics on vehicle dynamics control need to be evaluated in detail. This paper firstly analyzed the dynamics characteristics of FWID EV, including the feasible region of vehicle global force, the improvement of powertrain energy efficiency and the time-delays of electric motor torque in the direct yaw moment feedback control system. In this way, the influence of electric motor output power limit, road friction coefficient and the wheel torque response on the stability control, as well as the impact of motor idle loss on the torque distribution method were illustrated clearly. Then a vehicle dynamics control method based on the vehicle stability state was proposed. In normal driving condition, the powertrain energy efficiency can be improved by torque distribution between front and rear wheels. In extreme driving condition, the electric motors combined with the electro-hydraulic braking system were employed as actuators for direct yaw moment control. Simulation results show that dynamics control which take full advantages of the more controlled freedom and the motor torque response characteristics improve the vehicle stability better than the control based on the hydraulic braking system of conventional vehicle. Furthermore, some road tests in a real vehicle were conducted to evaluate the performance of proposed control method.     

Numerical simulation of the anti-shock performance of a gear case

Both sea battles and testing of ship in underwater explosions reveal unacceptably poor anti-shock performance of important shipboard equipment. Anti-shock performance of shipboard equipment is a significant factor determining fighting strength and survivability. The anti-shock performance of a shipboard gear case based on BV043/85 was investigated using numerical simulation. A geometric model of the gear case was built using MDT software and meshed in HyperMesh software, and then the finite element model of the gear case was formed. Using ABAQUS software, the anti-shock performance of the gear case was simulated. First, shock response of typical regions of gear case was determined. Next, some generalizations were made about the anti-shock performance of the gear case by analyzing the Mises stress of typical regions varied with shock inputs. Third, weak regions were determined from simulation results. The threshold values of shock resistance of the gear case at different impulse widths were obtained through interpolating the numerical simulation results selected from the most dangerous spot. This research provides a basis for further optimization of the design of gear cases.     

Comparison of several traffic forecasting methods based on travel time index data on weekends

Traffic forecasting provides the estimation of future traffic state to help traffic control,travel guide,etc. This paper compared several widely used traffic forecasting methods,and analyzed each one's performance in detail to make conclusions,which could redound to researchers choosing an appropriate traffic forecasting method in their own works. Compared with conventional works,this paper creatively assessed the performance of traffic forecasting methods based on travel time index (TTI) data prediction,wh...     

A reconfigurable stamping die and its stamping process

A reconfigurable flexible poles die was developed. The die can be used to implement the process of “the multi-point pressing and forming sheet”. Sheet metal is restricted by the elastic pressing forces putting on the upper and lower surfaces of sheet in stamping process. The method is an effective way to enhance the buckling critical stresses and reduce wrinkling of sheet. The results of tests indicate that the die can achieve “one die brings multi-purpose” and suppress the wrinkle of sheet. The process of the multi-point pressing and forming sheet provides a practical and effective way for the curved sheet metal forming.     

An experimental analysis of intelligibility and efficiency of in-vehicle route guidance system displays

This study focuses on the user-interface of the route guidance system with an electronic map display. The ultimate goal of the study is to aid in designing electronic map displays that can deliver information to the user most efficiently and expeditiously with minimum confusion. To evaluate the efficiency and understandability of a map display, laboratory experiments were designed and conducted in this study. In the experiments the subjects were presented with electronic map displays of different attributes and performed a set of tasks. Their understanding of the information contents was measured based on the outcomes of the tasks, and subjective ratings of the ease of using the maps were obtained. Using the experimental data obtained, a structural equations model system is developed to explain the understandability of a map display in terms of the subject’s attributes and the characteristics of the map display. The experimental procedure and the modeling results are presented in this paper.     

大连快轨车辆接触器和继电器故障分析与改造

对大连快轨矗号线车辆的部分接触器和继电器频繁发生故障的情况进行了分析，并且对相关接触器和继电器的改造作了详细的论述。     

缓和曲线数学模型在公路施工中的应用

分析缓和曲线的数学模型，推理缓和曲线点位坐标的计算公式，检测缓和曲线实地放样的数学方法，达到公路施工应用的目的。     

An investigation of different methods for the prevention of parametric rolling

The parametric rolling of modern containerships is emerging as a serious problem, to the extent that its effects warrant a study into its prevention. In light of this, two methods for reduction of parametric rolling are proposed and examined by physical model experiments. The first is a sponson attached to the side of a ship, the purpose being to decrease the rate of change of the rollrestoring moment. The second is an antirolling tank to increase roll damping. By conducting free-running model experiments for a 6600-TEU post-Panamax container ship with sponsons under typical parametric rolling conditions, it was found that the sponsons could decrease the magnitude of parametric rolling. The antirolling tank could prevent parametric rolling completely in certain conditions, even in severe head seas. Using the damping coefficients from experimentally derived data of a model ship with an antiroll tank, a numerical simulation was established. The numerical model was then compared with the free-running model experiments. The results indicated that the numerical model could qualitatively verify the experimental results. Finally, an attempt to optimise the size of an antirolling tank for preventing parametric rolling for the subject post-Panamax container ship in the North Pacific Ocean is presented.     

A semi-fragile wavelet transform watermarking scheme for content authentication of images

A novel semi-fragile watermarking scheme for the content authentication of images using wavelet transform (WT) is presented in this paper. It is tolerant to the embedded wavelet image compression methods based on WT such as embedded zerotree wavelet (EZW), set partitioning in hierarchical trees (SPIHT) and embedded block coding with optimized truncation (EBCOT) in JPEG2000 to a pre-determined bit-plane, but is sensitive to all other malicious attacks. The image features are generated from the lowest-frequency (LF) subband of the original image as the embedded watermark. The watermark is embedded into the pre-determined bit-plane by adjusting the corresponding values in the given subband. In the process of watermarking authentication, we compare the image features generated from the LF subband of the received image with the embedded watermarking information (the image features of the original image) extracted from the pre-determined bit-plane in the given subband of the received image to decide whether the image is attacked maliciously or processed acceptably (the embedded wavelet compression). The most important advantage of our watermarking scheme is that the watermark information can be extracted from the watermarked image when detecting watermark, so the received image authentication needs no information about the original image or watermark. Experimental results prove the effectiveness of our proposed watermarking scheme.