老化因素对沥青性能的影响

通过SHRP试验，分析沥青在老化过程中，各因素(时间、温度、氧、水)对其高、低温性能的影响，从而为沥青的再生提供依据。     

混凝土箱梁设计参数对温度效应的影响

在对水府庙混凝土箱梁桥温度场的实测和分析基础上,进行设计参数的研究,包括箱梁翼缘悬臂长度、腹板高度和桥梁轴线方位角对温度场和温度应力的影响,得到最大横向温差与（腹板高度/翼缘悬臂长度）的曲线图.     

V形刚构桥施工中倒三角区域支架的拆除时机分析

采用桥梁博士软件模拟一座典型的V形墩连续刚构桥的施工过程,为找出支架拆除对传力途径的影响,分别单独计算结构自重、预应力以及收缩徐变内力,然后对单因素分析的结果进行组合。分析结果表明倒三角区域支架的拆除时机对桥梁在施工阶段及成桥后的内力均有显著影响,可达50%以上。建议优先采用早拆支架方案,以使结构受力明确,且对V形墩区域受力有利。     

Study on dynamic characteristics of vehicle gearbox under multi-boundary conditions

With the development of vehicle gearbox to high-power-density and high-speed, how to predict and optimize the dynamic characteristics of vehicle gearbox becomes increasingly prominent. Aiming at the vehicle gearbox, this paper comprehensively and deeply studies the dynamic characteristics under the multi-boundary conditions. The generation mechanism of the multi-source excitations triggering the gearbox vibration is analyzed firstly. The vibration transfer path of the gearbox is explored. Secondly, the engine excitation, the gear meshing excitation and the bearing support load are numerically calculated. According to the finite element method, a fluid-solid coupling finite element model of the gearbox body is established to predict the gearbox dynamic responses based on the Galerkin method and the Hamiltonian variational principle. Finally, the effects of the excitation condition, oil height and reinforcement forms on the vibration responses of the gearbox body are thoroughly studied by simulation. The analysis indicates that it not only helps to modify and improve the method of forecasting the gearbox dynamic response, and also provides the theoretical and technical guidance for the gearbox design and optimization.     

模拟计算法在重型车辆燃油经济性标准中的应用研究

随着节能减排压力的日益严重,世界各国均开始制定重型车辆的燃油经济性标准。在对重型车燃油经济性的测量方面,模拟计算法由于操作简单、可重复性好、成本低的优点越来越受到行业的重视,在日本、中国和美国的标准中都得到了应用。本文在分析模拟计算法测量车辆燃油经济性的原理基础上,对比研究了日本、中国和美国标准中模拟计算法的应用情况,分析了各国在模拟计算法关键环节上策略的异同。     

Space enterprise strategy guiding-based study on project portfolio management and flow optimization

Project portfolio management (PPM) is the centralized management method, process and technology in multiple projects. When multiple projects in the space industry are implemented, it provides an effective methodology to resolve the problems at the same time such as conflicts among models, decrease in design efficiency, and increase in target deviation. Hence, a PPM dedicated to multiple projects management in space enterprise is presented in this paper. Firstly, an analysis of features and contents in space enterprise portfolio management mode is performed by using PPM based on its specific strategic characteristics. Then, the principle and selection methods of PPM are provided as a reference for the future development of an enterprise. Finally, a multiple-level organization architecture including decision making layers, function management layers and project execution layers is proposed so as to adapt to possible changes in the multiple projects and correspond to the strategic development. As a consequence, a perfect matching mechanism to fit the changes in PPM modes is reached. In addition, the flow chart of PPM is designed and optimized by analyzing the implementation procedure of strategic target and project portfolio life-cycle, which is expected to realize the purpose of improving space enterprise management efficiency, project management capacity, innovation development and economic benefits.     

机器人生产线在船舶智能制造中的应用研究

智能制造是“中国制造2025”的主攻方向。本文先浅谈了智能船厂，并结合国内首个智能船厂试点对智能船厂的初级发展建设等进行初步探索，主要对船舶智能制造机器人生产线应用进行梳理分析，如工艺流程及布置、生产模式改进、提质增效和人员减配等。     

浅谈FAS双中心建设及设备维护

重点分析了西安局集团公司由2K数调主系统组网更新改造为FAS双中心网络的建设方法,并根据日常维护经验,列举了调度台通道故障处理、FASB简易故障判断及计表倒换试验、FASA和FASB系统与MSC之间的业务故障处理等.     

景观道路的设计实践——广阳岛环岛路设计

广阳岛环岛路的主要功能是服务性景观路,跟环岛滨江公园一起,共同构筑广阳岛的滨江景观带。尝试引进了国外的宁静化设计,尽可能推行最生态的工程做法,努力创造人与自然相和谐的环境,并竭尽全力地将这些构想付诸实施。为了实现以上目标,道路、交通、排水、结构、桥梁和电照专业,在景观专业的组织下,共同展开了这条景观路的设计尝试。     

Effect of interference fits on the fatigue lives of bolted composite joints

The effect of interference fits on the fatigue lives of bolted composite joints is investigated by conducting mechanical tests. Static and fatigue tests are carried out on specimens made of carbon-bismaleimide composites joined together as double-lap single-bolt joints. The bolts having interference fits ranging of 0 (neat fit), 0.5%, 0.75% and 1% are performed. The results demonstrate the relationship between fatigue life and different values of interference fits. After the fatigue tests, non-destructive evaluation (NDE) and scanning electron microscope (SEM) are used to observe the damage of the surrender and surface of the hole. The test results show that the interference fitted specimens have improved fatigue life compared to the neat fitted specimen. The NDE and SEM results reveal that the damage degree of interference fitted specimen is weaker than that for the neat fitted one.