基于多处理机的船舶动力定位控制系统

该文介绍了船舶动力定位控制的设计方法,研究了动力定位系统的分布式多处理机体系结构,提出了动力定位应用软件的层次化结构设计思想,基于多处理机的系统设计方案合理,并行度高,实时性好,可靠性高,可以很好的完成复杂船舶动力定位系统所要求的实时信息采集,数据处理,控制计算,推力分配,能源管理等任务,具有重要的工程实用价值。     

拜访美国LC港海岸警备队

早就想去拜访美国海岸警备队,但一直没有机会,以往他们上船检查,节奏很快,紧扣主题,没时间作更多的交流. 这次,船靠LC港,当我知道海岸警备队就在附近后,决定去走一趟.9月26日上午10点,我到了海岸警备队办公室门前.     

带阈值的广义双向细胞联想神经网络GCBAM及其稳定性质研究

在提出双向细胞联想神经网络CBAM的基础上,通过引入阈值概念,进而提出了广义双向细胞 联想神经网络GCBAM,研究了其平衡态,存在性质及其Lyapunov意义下的网络稳定性质。     

导热系数对寒区隧道温度场时空分布的影响

寒区隧道温度场对其抗防冻设计至关重要,围岩和支护结构的导热系数对温度场时空分布具有显著影响. 以寒区公路运营隧道为计算模型,采用理论推导、现场实测、数值仿真等方法对寒区隧道温度场的时空分布受导热系数的影响规律进行了研究. 研究结果表明:在任意时间点,变温圈内各点的温度均随支护结构导热系数的增大而降低,且支护导热系数越大,同位置处的温度降低速率越小;在任意时间点,支护温度随围岩导热系数的增大而升高,围岩温度随其导热系数的变化呈现分区性;可将围岩变温圈分为Ⅰ区和Ⅱ区:Ⅰ区内的各点温度随围岩导热系数的增大而升高;Ⅱ区内的各点温度随围岩导热系数的增大而降低;时间越长,Ⅰ区和Ⅱ区分界线的斜率和截距越大. 研究成果可为寒区隧道的抗防冻设计及选线提供借鉴和参考.      

高原人群出行拥挤感知与调适行为研究

为缓解高原城市节日期间部分路段人流过于密集的状况,对高原人群出行过程中的拥挤感知和调适行为进行研究。首先,在对高原人群高度自由走行速度、生理尺寸进行测定的基础上,采用连续人群流动模型分别对高原人群拥挤临界密度、人群运动速度减小时的人群密度和人群停滞状态时的最大密度进行测算,进而标定高原人群最大忍受密度为8.5人/m2。然后,选取雪顿节期间八廓南街人流短时间内高度聚集的状况进行拥挤状况评估,结果显示该路段人群密度为8.34人/m2,接近高原人群最大忍受密度,因此判定八廓南街存在拥挤事故风险。最后,依据基于层次分析法的高原人群拥挤感知影响因素分析结论,提出相应的调适行为措施,力求维护民族宗教节日期间高原城市公众正常的出行秩序。     

路基填筑引起水泥搅拌桩复合地基变形监测分析

针对目前水泥搅拌桩复合地基在路基填筑作用下变形特性研究不足的问题,依托我国海积软土地区某水泥搅拌桩加固铁路路基填筑施工案例,对水泥搅拌桩复合地基变形进行监测,分析路基填筑作用下水泥搅拌桩复合地基变形特性,并为路基填筑速率控制和水泥搅拌桩加固方案设计提供建议。研究结果表明:路基填筑作用下地基加固区压缩量占总沉降的56.1%,沉降速率最大为2.4 mm/d;素填土和淤泥层侧向变形显著,侧向变形速率最大为4.6 mm/d;路基坡脚7 m内、深度5 m以上地层受路基填筑施工扰动较大;坡脚侧向变形速率较地基沉降速率更接近于控制指标,填筑速率的控制应以控制坡脚侧向变形速率为主;本施工案例中水泥搅拌桩加固方案可满足各铁路类别的路基工后沉降的控制要求,类似工程中水泥搅拌桩设计应以控制路基填筑施工对邻近结构物的影响为主。     

基于离散-连续耦合的钢桥面铺装剪切模拟

层间剪切破坏是钢桥面铺装主要病害之一,为了对钢桥面铺装复合结构层间剪切行为进行研究,基于三维离散-连续耦合方法建立了钢桥面铺装复合结构仿真模型,分析得出30℃条件下钢桥面铺装层间剪切破坏行为的变化规律,分析剪切速率对钢桥面铺装层间剪切受力状态的影响。研究结果表明过高或过低的行车速度对钢桥面铺装层都不利。对比分析离散-连续模型与离散元模型模拟结果发现,离散-连续模型计算结果更加符合实际情况。     

Geometric calibration algorithm of polarization camera using planar patterns

Polarization pattern provides additional information besides spectral signatures. It can be used in many applications, such as navigation, defect detection and object identification. A novel polarization camera composed of four synchronized cameras is proposed, and it can realize real-time polarization measurement. This study particularly concentrates on the geometric calibration of the system. The projection model is analyzed and the multi-camera calibration algorithm is proposed. Firstly, each camera is calibrated separately using planar patterns, and then the geometric calibration algorithms are performed. Due to the geometrical constraint, a global optimization method results in smaller estimation uncertainties. A mean rotation error of 0.025° and a mean translation error of 0.26mm are achieved after geometric calibration. The images are rectified to establish a correspondence among cameras and are combined to acquire the polarization measurement. The polarization pattern of the skylight is measured by the system and the results are consistent with the previous studies.     

Research of legal affair simulation based on Petri net

Legal affair simulation is on the basis of information technology, and can simulate legal scene. College students do legal experiments with virtual reality scene. This helps to train college students. Petri net has not only strict math definition to analyze the dynamic behavior of models, but also intuitive graphic expression. Petri net is used to model for legal process. Reduction rules of Petri net are used to analyze the correctness of the system. At last Java Business Process Management (JBPM) technology is used to realize legal affair simulation models, models are transformed into flow charts. Simulation software deduces processes of legal affair. Many college students have improved their ability with the software, the fact proves that the method is effective.     

Compensation of pressure enthalpy effects on temperature fields for throttling of high-pressure real gas

For the pressure enthalpy of high pressure pneumatics, the computational fluid dynamics (CFD) simulation based on ideal gas assumption fails to obtain the real temperature information. Therefore, we propose a method to compensate the pressure enthalpy of throttling for CFD simulation based on ideal gas assumption. Firstly, the pressure enthalpy is calculated for the pressure range of 0.101 to 30 MPa and the temperature range of 190 to 298 K based on Soave-Redlich-Kwong (S-R-K) equation. Then, a polynomial fitting equation is applied to practical application in the above mentioned range. The basic idea of the compensation method is to convert the pressure enthalpy difference between inlet air and nodes into the compensation temperature. In the above temperature and pressure range, the compensated temperature is close to the real one, and the relative temperature drop error is below 10%. This error is mainly caused by the velocity difference of the orifice between the real and ideal gas models. Finally, this compensation method performs an icing analysis for practical high pressure slide pilot valve.