Efficient clustering and simulated annealing approach for circuit partitioning

Circuit net list bipartitioning using simulated annealing technique has been proposed in the paper. The method converges asymptotically and probabilistically to global optimization. The circuit net list is partitioned into two partitions such that the number of interconnections between the partitions is minimized. The proposed method begins with an innovative clustering technique to obtain a good initial solution. Results obtained show the versatility of the proposed method in solving non polynomial hard problems of circuit net list partitioning and show an improvement over those available in literature.     

Study on bending conditions of plate in coil box

In a coil box between the roughing and finishing stands on a hot strip mill, a problem has been encountered that the entry region of the plate touches the bending rolls and deforms. As a result, the defective coil occurs. The condition of plate bending, which forms a new deformation feature in coiling, is analyzed. In this paper, the authors focus on the research of the effects of coiling parameters, such as the thickness of plate, roll speed and feeding speed of plate in coil box, and on specific plate bending. A finite element method is developed to simulate this coiling process. Based on numerical simulation, the effects of the coiling parameters on the mechanics and deformation of the bending plate are obtained. Numerical simulation tests have verified the validity of the developed model.     

Comments on enhanced yoking proof protocols for radio frequency identification tags and tag groups

A radio frequency identification (RFID) yoking proof scheme can generate proofs of simultaneous presence of two tags in the range of a specified reader so that an off-line verifier can verify the proofs later. This proof has found several interesting applications. However, many existing RFID yoking schemes are vulnerable to replay attacks. To overcome the weaknesses, Cho et al. proposed a new RFID yoking proof protocol and a new grouping protocol. Unfortunately, Cho et al.’s schemes are still vulnerable to replay attacks. In this paper, in addition to demonstrating weaknesses, we further discuss the rationale behind these weaknesses to provide a guide line for designing secure RFID yoking schemes. Based on the guide line, we propose a new RFID yoking scheme and a new RFID grouping scheme. Performance evaluation shows that our scheme outperforms its counterparts.     

Strategies to achieve deep reductions in metropolitan transportation GHG emissions: the case of Philadelphia

ABSTRACT

This paper investigates strategies that could achieve an 80% reduction in transportation emissions from current levels by 2050 in the City of Philadelphia. The baseline daily lifecycle emissions generated by road transportation in the Greater Philadelphia Region in 2012 were quantified using trip information from the 2012 Household Travel Survey (HTS). Emissions were projected to the year 2050 accounting for population growth and trends in vehicle technology for both the Greater Philadelphia Region and the City of Philadelphia. The impacts of vehicle technology and shifts in travel modes on greenhouse gas (GHG) emissions in 2050 were quantified using a scenario approach. The analysis of 12 different scenarios suggests that 80% reduction in emissions is technically feasible through a combination of active transportation, cleaner fuels for public transit vehicles, and a significant market penetration of battery-electric vehicles. The additional electricity demand associated with greater use of electric vehicles could amount to 10.8 TWh/year. The use of plug-in hybrid electric vehicles (PHEV) shows promising results due to high reductions in GHG emissions at a potentially manageable cost.     

Traffic noise studies in a tropical environment

This paper reports upon a survey of traffic noise annoyance in three residential districts of Trinidad, West Indies. Householder perceptions were solicited by means of a questionnaire survey and direct measurements of traffic noise levels were taken. The results were compared with surveys elsewhere. It was concluded that household status had little effect on annoyance perception, that at L₁₀ levels greater than 70 dB(A) at a dwelling facade the noise level is unacceptable. L₁₀ levels less than 65 dB(A) at the building facade are not perceived as annoying in the environment considered.     

Plan implementation in the Florida keys through land acquisition

Abstract

The Florida Keys are an example of a fragile resource threatened by development. The early division of the area into small lots made conventional planning and regulation difficult. This paper describes the creation of a conservancy for the Keys—the history of development, the conditions necessitating a conservancy, and the political wrangling it took to implement the conservancy.     

On-road visual vehicle tracking using Markov chain Monte Carlo particle filtering with metropolis sampling

In this study, a method for vehicle tracking through video analysis based on Markov chain Monte Carlo (MCMC) particle filtering with metropolis sampling is proposed. The method handles multiple targets with low computational requirements and is, therefore, ideally suited for advanced-driver assistance systems that involve real-time operation. The method exploits the removed perspective domain given by inverse perspective mapping (IPM) to define a fast and efficient likelihood model. Additionally, the method encompasses an interaction model using Markov Random Fields (MRF) that allows treatment of dependencies between the motions of targets. The proposed method is tested in highway sequences and compared to state-of-the-art methods for vehicle tracking, i.e., independent target tracking with Kalman filtering (KF) and joint tracking with particle filtering. The results showed fewer tracking failures using the proposed method.     

电动汽车水冷电机散热影响因素研究

建立某商用电动汽车电机损耗模型并开展其水冷热仿真分析,研究不同散热结构参数对电机温升的影响规律,并进行台架试验验证.     

Application of the reverse 3D scanning method to evaluate the wear of forging tools divided on two selected areas

This study is focused on tools used in the industrial hot forging process of a front wheel forging (eventually–gear wheel) manufactured for the automotive industry. Four different variants were applied for the tools: 2 die inserts were coated with two different hybrid layers (GN + PVD type), i.e. AlCrTiN and AlCrTiSiN, one insert was only nitrided, and one was pad welded, to improve tool durability. The tool wear was analysed and represented by the material degradation on the working surface, based on the 3D scanning and the material growth of the periodically collected forgings. Additionally, the scanned tools were divided into two areas, in which it was found, based on the reliminary analysis, that various degradation mechanisms are predominant. Microstructural and hardness measurements of the analyzed tools were also performed. Based on the results, it was found that, in the central part of the die insert (area A), thermo-mechanical fatigue and wear occurred, while in the area of the bridge insert (area B), only abrasive wear could be observed. For these areas (A and B), the loss of material was determined separately. In area A for the inserts with hybrid layer GN+AlCrTiSiN and gas nitrided, an intensive increase of wear took place, which was not observed for the pad welded and GN+AlCrTiN layer insert, for which, together with the increase of the forging number, a proportional growth of the loss of material occurred. In area B the weakest results were obtained for the insert with GN+AlCrTiSiN layer, while wear of other die inserts grew similar and proportional.